Hare Hatch expansion joint sealing
Work needed on a movement joint in Hare Hatch? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Chipped joint edges on forklift routes
- Expansion joints split through the centre of the bead
- Sealant peeling off one face of the joint
Expansion joint sealing for businesses in Hare Hatch
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Commercial clients in Hare Hatch
Hospitality, education, healthcare, office and retail clients book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. One quote can cover more than one site, so there’s one set of paperwork to deal with.
How we handle expansion joint sealing in Hare Hatch
Joints in car park decks and ramps are among the hardest-working in any building. Tyres load the edges, and de-icing salts and water work into any gap, so failed seals soon lead to leaks onto the level below and broken edges. We reseal deck and ramp joints with a trafficable sealant chosen for the movement, phasing bays so the car park can stay in use. We work on podiums and floor movement joints, blockwork control joints and car park decks and ramps, and the usual reasons a site gets in touch are rain penetration at brick or block movement joints and arrises breaking up along floor joints. Most enquiries from Hare Hatch start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Smaller community and commercial buildings around Hare Hatch have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Place
- Hare Hatch (RG10)
- Region
- Wokingham
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Where floor joints take the most wear near Hare Hatch
Rainfall across the South East, Hare Hatch included, is lower than in many parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and where de-icing salt is spread in winter, open joints let it in. Hare Hatch has at least three named business or industrial parks inside a 3-mile radius. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
Schools like Robert Piggott CofE Infant School often have long brick elevations with movement joints that age quietly. On a site such as Castle End Business Park (less than half a mile south of Hare Hatch), the movement joints are in car park slabs, paving and building elevations. Sites like St Mark's Hospital (4.7 miles north-east of Hare Hatch) carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Hare Hatch is about 4 miles north-east of Woodley, in Wokingham. Businesses, contractors and managing agents in Hare Hatch can call on us for movement joints. Across Wokingham, 42 places are covered, including Hare Hatch. Sites around Reading have their own page, roughly 7 miles from Hare Hatch.
Anyone looking for expansion joint sealing in RG10 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. If your site is on Bath Road, Tag Lane and Milley Lane or close by, we can quote for movement joints. If your building is just outside Hare Hatch, we cover The Holt (1 mile north-east), Kiln Green (1 mile north-east), Ruscombe (1 mile south-west), Twyford (1 mile south-west) and Waltham St Lawrence (2 miles east). A short drive away, we cover Wokingham (6 miles south), Woodley (4 miles south-west), Earley (6 miles south-west), Crowthorne (9 miles south), Lower Earley (6 miles south-west) and Winnersh (5 miles south).
What’s near Hare Hatch
Around Hare Hatch, our work takes us to commercial buildings near The Queen Victoria pub, Loddon Nature Reserve and The Piggott School. For rail, the closest station is Wargrave station, about 1.4 miles west of the centre. Well-known places in the area include St Mark's Hospital (4.7 miles north-east) and Frazer Nash Archives (3.3 miles north-west). Not far away are Weycock Hill and Hurley Chalk Pit.
Nearby places to Hare Hatch
Other services in Hare Hatch
Different surfaces, different methods
Joints between different materials
Some mixed-material joints suit a hybrid sealant. The choice depends on the substrates and how much the joint moves.
Podium joints
Podium joints often sit within a waterproofing system. We reseal the joint where sealant is the specified fix.
Keeping the joints sound
Once the work is signed off, a little attention goes a long way:
- Note which joints were done, when, and with what
- Inspect movement joints alongside other routine building checks
- Report split or peeling joint sealant early
- Avoid parking heavy plant or pallets on joint lines
Grit is the slow enemy of a joint seal. Stones pressed into the bead by wheels or feet can puncture it and decks and floors suffer most. Regular sweeping keeps joint lines clear.
On a multi-storey car park, a failed joint normally shows up as a leak onto the deck underneath. That water often carries de-icing salts with it and it can affect the structure over time. Sealing the joint promptly stops it at source.
When it isn’t the sealant
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- A joint that has to be widened or re-detailed before it can work
If you are not sure, just ring 01277 525 020 or email the details over and we will give you a straight answer.
Surfaces we seal
- Car park decks and ramps
- Cladding panel joints
- Brickwork movement joints
- Precast concrete panel joints
- Podiums and floor movement joints
- Blockwork control joints
Common questions from Hare Hatch clients
Can you take on a job at a hospital such as St Mark's Hospital?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is Castle End Business Park, near Hare Hatch, within your area?
Yes, sites like Castle End Business Park are within our area, along with the rest of Hare Hatch. To start, just phone 01277 525 020 or email us with the unit, the joints involved and your access times.
Can you quote from photographs?
That depends on the size and complexity of the job. Straightforward work can often be priced from photographs and measurements, while larger or less clear jobs get a site visit first.
Does the weather affect the work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
What happens if it rains on the day?
Weather matters for any external joint: rain, frost and condensation all stop sealant bonding. Indoor joints can usually carry on regardless.
What sealant do you use in movement joints?
Movement capability matters most. Where two different materials meet, a hybrid sealant can be the better choice.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Diagnose, treat, sign off
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Rural sites near Hare Hatch may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- You get a fixed quote with the product and its movement capability stated.
- We strip out the old seal and prepare the faces, flagging any broken edges that need repair before sealing.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
Getting the site ready
- Send any specification or drawings in advance
- Move anything stored against the joints
- Let building users know which areas are affected
Request a quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, speak to us on 01277 525 020 or email us.
Related advice
What happens if it’s left?
Sealing over a failed movement joint is a common shortcut. A bead over the old seal can’t bond or flex, so it fails quickly. Full removal and preparation is in every quote. Older rural buildings around Hare Hatch move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a quote once you have the details.
What you get with us
- CHAS accredited
- Constructionline member for supplier checks
- Colour agreed before work starts
- Coloured sealants to suit the setting, where available
See how commercial sealant jobs are priced and how we’re accredited.