Expansion and movement joint sealing in Fowlis, Angus
Expansion and movement joint sealing in walls, decks and floors throughout Fowlis and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Weathered movement joint sealant that no longer flexes
- Car park joints leaking onto vehicles below
- Chipped joint edges on forklift routes
Expansion joint sealing for Fowlis sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle expansion joint sealing in Fowlis
Floor movement joints in warehouses, retail and public buildings carry wheeled traffic. Without a sound filler, joint edges chip and spall under load, so the right filler or sealant for the traffic and movement matters. We will tell you if the edges need repairing before sealing and phasing can keep areas working. Site teams most often ask us about joints packed with grit and debris and water getting into the wall through a failed joint, across cladding panel joints, car park decks and ramps and brickwork movement joints. A single leaking joint is often how a building in Fowlis first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For outside joints near Fowlis, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range. Internal floors can be done whenever suits the site.
Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Where
- Fowlis (DD2)
- Wider area
- Angus
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
For managing agents and facilities managers
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Also near Fowlis
Also in Fowlis
What affects the price in Fowlis
Before we quote, we look at:
- Specialist products, such as fire-rated or hygienic sealants
- How much there is to seal
- The site’s rules and procedures
- Whether the work must be split into stages
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote.
What we need to price the job
We can often quote from photos and a few details. It helps to include:
- How the joints are reached, and at what height
- Any specification or named product
- Drawings or a marked-up plan, if available
- The asbestos register, for older buildings
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Surface by surface
Joints between different materials
Junctions between brick and render, or concrete and cladding, move independently. The product must bond to both substrates and cope with the movement priming where the maker calls for it.
Concrete and precast panel joints
Concrete edges can be weak or carry release agents that stop adhesion. Proper cleaning and primer where specified give a sound bond, so the new seal holds.
Warehouse floors and decks around Fowlis
With the shore within about 3 miles, Fowlis counts as a coastal location. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so it pays to keep them sealed. Fowlis is on Scotland’s drier eastern side. Freezing weather and salt still attack open external joints. Resealing before the cold months helps protect the edges.
For an occupier at a site such as Wester Gourdie Industrial Estate, 2.3 miles south-east of Fowlis, the joints at loading doors and dock levellers normally see the hardest wear. Hospital campuses such as Royal Dundee Liff Hospital (1.4 miles east of Fowlis) grow in stages, leaving movement joints wherever new blocks meet old. Another example is Dundee Technology Park, 2.6 miles to the south-east of Fowlis, where floors and yards would be done in stages around the occupiers.
Fowlis is about 5 miles west of Dundee, in Angus. Commercial clients in Fowlis use us for work on movement joints. Fowlis is one of 65 places we cover in Angus for movement joints.
Business premises anywhere in DD2 are within our area for movement joints. Streets here include Kirk Road, Benvie Road and Smiddy Brae. Sites close to Fowlis are covered too, including Liff (1 mile east), Muirhead (2 miles north-east), Piperdam (2 miles north-west), Invergowrie (2 miles south-east) and Birkhill (2 miles east). A short drive away, we cover Forfar (14 miles north-east), Monifieth (11 miles east), Carnoustie (15 miles east), Kirriemuir (13 miles north), Hunter's Town (14 miles east) and Gardynebourg (14 miles east).
What’s near Fowlis
Fowlis’s nearest station is Invergowrie station, roughly 2.8 miles south-east. Nearby you will also find Royal Dundee Liff Hospital (1.4 miles east) and Fowlis Castle (under half a mile south). For a walk, there’s Piperdam Loch and Lundie Craigs.
Diagnose, treat, sign off
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then handed back before we move to the next. Tell us who will meet us and how to get in at your building near Fowlis. That goes into the plan alongside the quote.
- First the joints are inspected, widths measured and the type of failure noted.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Preparing the site
- Move anything stored against the joints
- Tell staff and tenants when we will be in
- For older buildings, check the asbestos register before work
Get a fixed quote
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.
Related advice
After the work
For the best life from the joints:
- Plan racking layouts so feet don’t land on a joint
- Include every elevation and deck joint in periodic inspections
- Raise snow-clearing blades over deck joints where possible
- Look over external and deck joints after a hard winter
Every joint we seal is backed by a 12-month guarantee on workmanship. Keep the handover details, product and date with your O&M records.
A failed deck joint lets water straight through to the level below. That water often carries de-icing salts with it and it can affect the structure over time. Resealing early limits the damage.
Honest limits
A proper diagnosis includes knowing what sealant can’t do. You’ll hear from us if the cause turns out to be one of these:
- Broken or spalled joint edges, which need repairing before any sealant goes in
- A joint that has to be widened or re-detailed before it can work
- Movement on a scale no sealant is meant to absorb
Not sure which it is? You can phone 01277 525 020 or email drawings and photos and we will tell you honestly.
Joints and surfaces we work on
- Podiums and floor movement joints
- Precast concrete panel joints
- Cladding panel joints
- Car park decks and ramps
- Blockwork control joints
- Brickwork movement joints
Your questions answered
Can you work on a hospital site such as Royal Dundee Liff Hospital?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is Wester Gourdie Industrial Estate, near Fowlis, within your area?
Yes. Our area takes in Fowlis and its surroundings, with estates and business parks such as Wester Gourdie Industrial Estate included. Send details of the unit and the work through our quote form for a quick quote.
Are you fully insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Are you CHAS accredited?
Yes. We’re CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
How soon can the area be used again?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
What causes movement joint sealant to fail?
Adhesion failure, cohesive failure, edge breakdown and UV ageing account for most cases. We diagnose which one it is before resealing.
Do you reseal car park expansion joints?
Yes. Tyre loads, grit and de-icing salts make these some of the hardest joints to keep sealed.