Ashmansworth expansion joint sealing
Need expansion joint sealing in Ashmansworth? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Arrises breaking up along floor joints
- Joints packed with grit and debris
- Rain penetration at brick or block movement joints
Expansion joint sealing for businesses in Ashmansworth
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle expansion joint sealing in Ashmansworth
We’ve been sealing expansion and movement joints for over 20 years for contractors, facilities managers and owners. Our applicators are CSCS-carded, we’re CHAS accredited and a Constructionline member, and we carry five million pounds of public liability insurance. Workmanship is backed by our 12-month guarantee. If you are dealing with damp inside where a wall movement joint has failed and new sealant over old, now failing, we can help, on podiums and floor movement joints, car park decks and ramps and precast concrete panel joints alike. Whether you call it commercial sealant work, mastic application or joint sealing, in Ashmansworth it comes down to the same thing: the right product in a properly prepared joint.
Around smaller places such as Ashmansworth, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
Our workmanship is guaranteed for 12 months, in Ashmansworth as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Location
- Ashmansworth (RG20)
- Region
- Hampshire
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What we are called out for in Ashmansworth
Car park decks and floors face loads that walls never see. Tyres and wheels press on the edges and the sealant. The product has to be suited to the traffic.
If one of these sounds familiar, it’s time for a closer look:
- Sealant pulling off the joint face
- Movement joints with split or torn sealant
- Car park joints leaking onto vehicles below
- Layers of sealant in a movement joint
Once a joint near Ashmansworth opens up, grit and water get in and the edges start to break; we’ll tell you if the edges need repairing first.
Comparing quotes
- Their plan for phasing and protecting the area
- How they handle RAMS and site documents
- Which product they’ll use, and why it suits the joint
- Are they CHAS accredited or on Constructionline?
Slabs, ramps and loading bays in Ashmansworth
Ashmansworth sits in one of the drier corners of the country, the South East. External slab and deck joints still need a dry, clean joint to seal, and where de-icing salt is spread in winter, open joints let it in. Central London is about 58 miles from Ashmansworth. The South East has large numbers of industrial estates and warehouses along the motorway corridors.
For floors and slabs around Ashmansworth, the product is chosen for the traffic and the movement at each joint.
Ashmansworth is about 7 miles south-west of Newbury, in Hampshire. Looking for expansion joint sealing in Ashmansworth? We can help, as we do across Hampshire. We work across 723 places in Hampshire, from busy centres to rural villages. Our Reading page has more on work in that area, about 21 miles away.
Commercial sites across RG20 are covered for movement joints. If your building is just outside Ashmansworth, we cover Test Valley (1 mile west), Vernham Street (4 miles west), Hell Corner (5 miles north-west), Upper Green (5 miles north-west) and Inkpen Common (5 miles north-west). A short drive away, we cover Basingstoke (13 miles east), Andover (8 miles south-west), Tadley (12 miles east), Popley (14 miles east), Tidworth (12 miles south-west) and Kempshott (12 miles south-east).
Local landmarks in Ashmansworth
Open spaces near Ashmansworth include Sidown Hill.
Questions about Ashmansworth
What site paperwork comes with a job in Ashmansworth?
RAMS, insurance certificate, CSCS details: list what the site needs and we’ll confirm it with the quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Is Ashmansworth too small for you to travel to?
No. Places such as Ashmansworth are covered as much as the big towns. We work across Greater London and the South East. Good photos up front let us bring everything on the first visit.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Can you seal car park deck joints?
Yes. Deck and ramp joints are resealed with a trafficable sealant chosen for the movement with bays phased so the car park keeps operating.
How soon can the area be used again?
Curing time varies by product, and we confirm it on the day, and sign any area that should be left alone.
How much does the work cost?
We don’t publish prices, as every site differs. With photographs or drawings, we can give you a fixed quote.
From enquiry to sign-off
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Jobs in and around smaller places like Ashmansworth are usually planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- First the joints are inspected, widths measured and the type of failure noted.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Before we start on site
- Explain the parking and delivery arrangements
- Have the specification and drawings to hand
- Send your site hours and access windows
Ask for a quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Advice
Why it’s worth doing now in Ashmansworth
Resealing is typically the answer, not replacing the element. Where the edges are sound, cutting out and resealing is enough. If the edges have broken up, we’ll tell you they need repairing first. Around Ashmansworth, it’s better to renew all the failing joints at once, rather than one at a time. Photos of every joint help us quote for the whole job.
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site requirements come into it too.
Why clients in Ashmansworth choose us
- Products installed to the manufacturer’s instructions
- CSCS-carded applicators
- Old sealant cut out, never sealed over
- Fully insured, including public liability cover
What affects the price in Ashmansworth
To price the job, we consider:
- Induction, permit and paperwork requirements
- The total length or number of joints
- Specialist products, such as fire-rated or hygienic sealants
- Location, for remote and island sites
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we will explain how it’s made up.
Details that help us quote
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- Approximate linear metres or a joint schedule
- Whether an asbestos survey exists
- The type of building and who uses it
- How the joints are reached, and at what height
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, give us a call on 01277 525 020 or send photos by email.
Site staff or a sealant specialist?
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
How the job changes by surface
Internal floor movement joints
Forklift and pallet-truck wheels break unsupported joint edges. We match the product to the traffic and the movement, and tell you if edges need repairing first.
Concrete and precast panel joints
Precast panels often have surface residues that sealant won’t bond to. We prepare the faces thoroughly and prime where the maker calls for it.