Expansion Joint Sealing in Tidworth
Sealant work in Tidworth for main contractors, managing agents and facilities managers: expansion and movement joint sealing in walls, decks and floors, quoted at a fixed price.
- Hardened, cracked sealant on exposed facades
- Expansion joints filled with dirt and stones
- New sealant over old, now failing
Expansion joint sealing for businesses in Tidworth
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle expansion joint sealing in Tidworth
Joints in car park decks and ramps are among the hardest-working in any building. Wheel loads, grit and de-icing salts attack the seal and the concrete either side. A sealant suited to traffic and the expected movement goes in and the work can be phased so parts of the car park stay open. If you are dealing with torn sealant in brick or block movement joints and hardened, cracked sealant on exposed facades, we can help, whatever the surface. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Tidworth is the same: the right product in a properly prepared joint.
Rural business units around smaller places such as Tidworth often have new slabs laid inside older buildings. Saw-cut and construction joints in those floors need the right filler or sealant for the forklifts and trolleys that use them.
Work we carry out in Hampshire comes with a 12-month guarantee. If an installation problem shows up, call 01277 525 020 or use the quote form and we will arrange a return visit.
- Where
- Tidworth (SP9)
- Region
- Hampshire
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
From enquiry to sign-off
We schedule the visit to fit the site hours and access windows you give us. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. If neighbouring businesses or buildings around Tidworth need work too, visits can be combined. Tell us your site hours and we will plan around them.
- We start with photos, approximate lengths and any drawings, visiting where needed.
- We compare each joint’s width with the movement and the sealant’s capability, and flag anything that needs an engineer.
- Old sealant and debris are cut out of every joint.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Before we start on site
- Warn occupants and staff about the work
- Explain the parking and delivery arrangements
- Flag any permit to work we will need
Ask for a quote
To get a fixed quote, speak to us on 01277 525 020 or email drawings and photos with the site address and an outline of the work. You can also send details through our quote form.
Related advice
Towns and villages near Tidworth
Also in Tidworth
Common problems we fix in Tidworth
On trafficked joints, wheels and salts do the damage. Wheel loads stress the sealant and the arrises, while de-icing salts and grit attack the seal. The product has to be suited to the traffic.
Common reasons buildings call us in:
- Damp inside where a wall movement joint has failed
- Hardened, cracked sealant on exposed facades
- Sealant peeling off one face of the joint
- Debris jammed in movement joints
Parks like Castledown Business Park, 1.7 miles to the north-east of Tidworth, combine paved areas, car parks and building elevations, each with joints that move.
What to look for in a quote
- Health and safety accreditation such as CHAS
- Is the sealant right for the movement and the substrate?
- How long is the guarantee, and what does it include?
- Will CSCS-carded applicators be on site?
Doing it in-house
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
What sets the cost
To price the job, we consider:
- Distance, for remote addresses
- The total length or number of joints
- Any access equipment needed
- Removal of failed or old sealant
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
Before you send an enquiry
Good information means a firmer quote. Helpful details to send:
- A wide shot and a close-up of the area
- Any specification or named product
- Anything awkward about access or site hours
- Whether an asbestos survey exists
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. For a chat about it beforehand, phone 01277 525 020 or use the quote form.
Warehouse floors and decks around Tidworth
Tidworth is in the South East, one of the UK’s drier regions. External joints still wait for dry conditions, and gritting in cold spells finds its way into open joints. Tidworth is about 70 miles from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital.
In a school such as The Wellington Academy, movement joints in brick, block and hall floors tend to be forgotten until they leak. Another example is Ludgershall Business Park, which lies east of Tidworth, where floors and yards would be done in stages around the occupiers.
Tidworth is about 8 miles west of Andover, in Hampshire. We send applicators to Tidworth for movement joints, handled exactly as we handle every other area. 723 places across Hampshire fall within our area, Tidworth among them. Southampton is covered too, some 25 miles away.
Postcode districts covered here: SP9. We cover commercial and managed buildings on Station Road, Pennings Road and Ebble Close. Access to Tidworth is via the A338 and A3026, so getting applicators and materials to site is simple. Sites close to Tidworth are covered too, including Perham Down (1 mile east), Ludgershall (2 miles north-east), Shipton Bellinger (2 miles south), Great Shoddesden (2 miles east) and Kimpton (3 miles east). Further afield, our area takes in Andover (8 miles east), Whitchurch (14 miles east), East Anton (9 miles east), Picket Piece (10 miles east), Picket Twenty (9 miles east) and Finkley Down (10 miles east).
Around Tidworth
Around Tidworth, our work takes us to commercial buildings near Clarendon Infants' School and the streets around them. Other landmarks nearby include Ludgershall Castle (2.2 miles north-east). Not far away are Quarley Hill.
Commercial clients in Tidworth
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Building owners and managing agents use us on everything from one building to a spread of sites around Tidworth. Several sites can go on one quote, which keeps the paperwork simple.
Questions about Tidworth
Does a site in Tidworth have to shut while its joints are sealed?
Typically not: we work in sections and hand each one back once it has cured. We agree the sequence and timings with you before we start.
Does your area include sites such as Castledown Business Park, near Tidworth?
Yes. We cover Tidworth and the area around it, including industrial estates, business parks and retail parks such as Castledown Business Park. Photos and a short description are enough for a first look.
What causes movement joint sealant to fail?
It depends on how the sealant has let go: tearing down the centre means too much movement, and lifting off one side means poor adhesion. Sometimes the edge material itself has failed.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
Are expansion joints and movement joints the same thing?
Movement joint is the broad term for any joint built in to let a structure move. In everyday use the two names are often swapped, and the sealing method is much the same.
When is resealing likely to be due?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
How do we ask for a quote?
The quote form is the simplest route, though you can also give us a call on 01277 525 020 or email a schedule or drawings. Photos, drawings or a joint schedule help us quote quickly.
Maintenance after handover
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. Our advice:
- Keep stones and debris out of open joint lines
- Act on the first tear or lifting edge rather than waiting
- Keep product details with the building records for the next reseal
- Raise snow-clearing blades over deck joints where possible
Our workmanship on movement joints carries a 12-month guarantee. Keep the handover details, product and date with your O&M records.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Damaged edges make the floor rough and wear wheels faster. Sealing early protects the edges.