The Mastic Doctor team standing beside their branded vans outside an office building
Aberdeen · Scotland

Mastic contractors in Tillydrone

Mastic packages for new-build and refurbishment projects in Tillydrone. CHAS accredited and fully insured, with a 12-month guarantee.

  • Bath and shower joints scraped during the final clean
  • Frame perimeters left unsealed or poorly sealed
  • Failed sealant in an existing building being refurbished
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
South East, London & Scotland
CHAS & Constructionline
Fully insured: £5m PL

Construction mastic for Tillydrone sites

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

How we handle construction mastic in Tillydrone

Refurbishment work needs a slightly different approach from new build. Old beads come out completely, as fresh silicone can’t grip old. New and existing joints then get the same preparation. The enquiries we see most involve cracks opening in caulked internal joints and failed sealant in an existing building being refurbished, on sanitary and kitchen joints, window and door perimeters and internal decorators’ caulk. Whether you call it commercial sealant work, mastic application or joint sealing, in Tillydrone it comes down to the same thing: the right product in a properly prepared joint.

City-centre sites in Scotland normally mean booked deliveries, tight storage and shared access. We work to the programme and the site rules, with CSCS-carded applicators.

Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.

The Mastic Doctor team standing beside their branded vans outside an office building
Place
Tillydrone (AB24, AB22, AB25)
Wider area
Aberdeen
Guarantee
12 months on every job
Price
Quoted before any work starts
Telephone
01277 525 020
Updated
3 November 2026

What sets the cost

We price every job individually. The things that drive the figure:

  • Working within restricted access windows
  • How much there is to seal
  • Site requirements such as inductions and permits
  • Distance, for remote addresses

What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote once you have the details.

Sending details for a quote

We can often quote from photos and a few details. Please tell us:

  • Approximate linear metres or a joint schedule
  • Whether the building will be occupied during the work
  • Whether an asbestos survey exists
  • The postcode of the building

Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or email the details over.

How the job changes by surface

Snagging before handover

Snags typically come from damage by following trades, missed joints or poor earlier work. Snagging can be included or priced separately, depending on what suits the programme.

Window and door perimeters

Frames sealed into the opening keep rain out of the reveal. They’re sealed with a low-modulus neutral-cure silicone or another product named in the specification, with backing rod in deeper gaps.

Questions about Tillydrone

How do tenement owners in Tillydrone get shared-part mastic done?

Work on shared parts is usually agreed by the owners, often through a property factor. We are happy to deal with the factor directly.

Do you cover business parks and estates near Tillydrone, such as St Machar Industrial Estate?

Yes. Estates, retail parks and business parks around Tillydrone, St Machar Industrial Estate among them, are all within reach. To start, just call 01277 525 020 or use the quote form with the unit, the joints involved and your access times.

Do you take on mastic snagging only?

Yes, we can. Send the snag list or photos and we will price it, then clear it to your programme.

How soon can the area be used again?

The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.

Which sealant will you use?

If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.

Do you do internal caulk as well as external mastic?

It depends on the specification, but most packages include frame perimeters, sanitary and kitchen joints, caulking where specified and a snagging pass.

How do we ask for a quote?

There are four steps: send details, get a quote, we seal, guaranteed. The first step only needs photographs and a postcode.

Building and refurbishing in Tillydrone

Tillydrone is within about 2 miles of the coast. Coastal exposure means perimeter and cladding joints work harder than on an inland job, so joint design, primers and product choice deserve extra care. Building work in Tillydrone comes under the Building (Scotland) Regulations 2004 and their technical handbooks, with warrants from the local authority verifier. We seal to the specification that sits behind the warrant.

Hospital estates such as Royal Cornhill Hospital (1.1 miles south of Tillydrone) tend to grow and change in phases, often next to occupied wards, so facade and perimeter sealing has to fit the estates team’s plan. School extensions, at buildings such as St Machar Academy, usually run to the summer holidays, mastic included.

Tillydrone is about 1 mile north of Aberdeen, in Aberdeen. Our applicators travel to Tillydrone for work on mastic packages, handled exactly as we handle every other area. 40 places across Aberdeen fall within our area, Tillydrone among them.

We take on mastic packages across the AB24, AB22 and AB25 postcode area, whatever the building. Among the streets we cover are Deer Road, Gort Road and Baker Road, and sites on any of them can send details for a fixed quote. Close to Tillydrone, our area also takes in Donside Village (1 mile north-east), Danestone (1 mile north-west), Berryden (1 mile south), Cornhill (1 mile south-west) and Aberdeen (1 mile south). Bigger towns within reach include Dyce (4 miles north-west), Cults (4 miles south-west), Braeside (3 miles south-west), Cove Bay (5 miles south), West End (3 miles south) and Craigiebuckler (3 miles south-west). Tillydrone ranks among the main centres of Aberdeen, with offices, shops, schools and other public and commercial buildings.

Near you in Tillydrone

We work on buildings around St Peter's RC Primary School, 97 High Street pub and Library and the streets around them. Nearby too are Bridge of Don Academy (1 mile north) and Seaton Park (0.5 miles east). The closest station to Tillydrone is Aberdeen station, roughly 2 miles south. Well-known places in the area include Bishop Dunbar's Hospital (0.5 miles east) and King's Museum (0.6 miles south-east). Not far away are Rubislaw Quarry and Gallows Hill.

Map of Tillydrone © OpenStreetMap contributors

Our process

We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. In a Scottish city, kerbside space and loading need planning, especially near the centre. Shared closes, stairs and the property factor may need to be part of the plan.

  1. First we look at the scope on site or from drawings.
  2. You receive a fixed quote covering scope, products and sequence.
  3. Paperwork is agreed and applicators are inducted on site.
  4. We seal plot by plot or floor by floor in line with the programme.
  5. Any frame gaps or issues outside our scope are flagged to the site team.
  6. The package is closed out, snags cleared and backed by our 12-month guarantee.

What we need from you

  • Send your site hours and access windows
  • Point out parking and an unloading spot
  • Point out any areas we must not close

Ask for a quote

Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. For a chat about it beforehand, call the office on 01277 525 020 or send photos by email.

Get a price

Related advice

Honest limits

A proper diagnosis includes knowing what sealant can’t do. We’ll tell you if the real problem is one of these:

  • Frame gaps too wide for sealant, which the installer needs to correct
  • Specifying the product where the designer hasn’t
  • Faulty frames rather than failed sealant

If you’re not sure, just phone 01277 525 020 or email us and we’ll give you a straight answer.

Joints and surfaces we work on

  • Internal decorators’ caulk
  • Brick and block movement joints
  • Sanitary and kitchen joints
  • Window and door perimeters
  • Floor and skirting junctions
  • Cladding and panel joints

Maintenance after handover

Keep the joints in good shape with a few simple steps:

  • Keep scrapers and abrasive pads off new beads
  • Keep product details for future maintenance
  • Keep finished joints away from paint, plaster and scrapers
  • Stick to the specified sealant rather than a generic substitute

Record which products went where in the handover file. Future maintenance is easier when the products are known, and tells you what to reseal with. We can confirm the handover information you need when we quote.

Leaving the mastic snag list to the end squeezes everyone. Clearing snags area by area spreads the work out, and avoids a rush.

When to call us in Tillydrone

Frames installed with uneven gaps make perimeter sealing harder. Sealant has a range of joint widths it can cope with, so gaps outside that range need sorting by the installer first. We flag them early rather than filling them with sealant that won’t last.

Site and facilities staff are often the first to spot these:

  • Inconsistent sealant finishes from plot to plot
  • Bath and shower joints scraped during the final clean
  • Frame gaps too wide for sealant alone
  • Internal caulk splitting as the building dries out

New units and refits on sites such as St Machar Industrial Estate, under half a mile south of Tillydrone, need their panel and perimeter joints sealed to the specification.

Questions to ask before you book

  • How the existing material will be dealt with
  • Health and safety accreditation such as CHAS
  • How long is the guarantee, and what does it include?
  • Will RAMS and insurance details be available?

Our contractor checklist

Accreditations

Trusted. Accredited. Insured.