The Mastic Doctor team standing beside their branded vans outside an office building
Glasgow · Scotland

Construction and new-build mastic in Parkhouse, Glasgow

Mastic packages for new-build and refurbishment projects throughout Parkhouse and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.

  • Existing joints on a refurb that need cutting out and resealing
  • Sanitary sealant damaged by following trades
  • Missed perimeter joints on a new elevation
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
Covering the South East & Scotland
CHAS accredited
£5m public liability

Construction mastic near Parkhouse

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Construction mastic in Parkhouse, done properly

A typical mastic package covers more than window perimeters: frame perimeters inside and out, caulking to trims and boards where the specification calls for it, sanitary silicone, kitchens, and the final snag list. Splitting those between trades often leaves gaps in responsibility. Site teams most often ask us about sealant knocked or painted over by other trades and new external sealant already peeling away, on cladding and panel joints, internal decorators’ caulk and floor and skirting junctions. One point of contact handles commercial sealant work in Parkhouse from the first photos to the final walk-round, for single jobs and planned programmes alike.

Construction around smaller Scottish places like Parkhouse is often one-off schemes: a school, a health centre, a hotel extension or a few houses. Exposed elevations in Scotland put facade and perimeter joints to work from day one, so the sealant choice matters.

A 12-month guarantee applies to all our work in Glasgow. Should something we installed fail, phone 01277 525 020 or use the quote form and we’ll come back to it.

Location
Parkhouse (G22, G20, G21)
Wider area
Glasgow
Cover
12 months on our workmanship
Quote
Quoted before any work starts
Call
01277 525 020
Last updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Doing it in-house

What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.

General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.

What sealant work can’t fix

Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:

  • Frame gaps too wide for sealant, which the installer needs to correct
  • Defective windows, doors or glazing units (the supplier or installer’s job)
  • Deciding which fire-stopping product a penetration needs

If in doubt, phone 01277 525 020 or email a schedule or drawings and we will say what we think.

Where we work in Parkhouse

  • Window and door perimeters
  • Floor and skirting junctions
  • Sanitary and kitchen joints
  • Brick and block movement joints
  • Internal decorators’ caulk
  • Cladding and panel joints

Diagnose, treat, sign off

In a busy building, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before the next one starts. For work around Parkhouse, we aim for one trip, which is why we ask for photographs and a full list first. External joints need a dry spell as well.

  1. First we take quantities off the drawings and read through the specification.
  2. A fixed quote sets out the scope, the products and the sequence.
  3. Any site paperwork you need (RAMS, insurance certificate, CSCS details) is confirmed with the quote.
  4. We seal each plot or floor as it’s released to us.
  5. Each joint is prepared, backed to depth and sealed in the product the specification names.
  6. We close out snagging and hand over with a 12-month guarantee.

What we need from you

  • Point out parking and an unloading spot
  • Tell us which areas need to stay in use
  • Share your working hours and any access restrictions

Get a fixed quote

We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, phone 01277 525 020 or use the quote form.

Ask for a quote

Related advice

Parkhouse: questions and answers

Do you take on work at healthcare sites like Stobhill Hospital?

Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.

Will you plan work around the academic year at somewhere like Glasgow Caledonian University?

Yes. Education sites normally want the work in vacations or in phases during term, and we plan to suit. Let us know which documents your site asks for, and we will confirm them alongside the quote.

Can you fit around our working hours?

Mention the site’s hours and access windows in your enquiry, and we’ll schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.

Can you follow the specification on our project?

Yes. Send it with your enquiry, and we’ll price the work to it.

What’s the quickest route to a quote?

There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photos and a postcode.

Can staff carry on working while you’re here?

Usually, yes. We phase the work so most of the building stays in use, with each area protected and signed.

What joints do you seal on a new build?

It depends on the specification, but frames, sanitary, kitchens, caulk where specified and snagging are typical.

Cost factors for mastic packages

Sealant work doesn’t have a standard rate, because every site is different. What we look at:

  • Quantities, in metres or numbers
  • How accessible the joints are
  • Joint width, depth and condition
  • Working within restricted access windows

The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote and we’ll explain how it’s made up.

Before you send an enquiry

Whether it’s one area or a whole building, the same details help:

  • Clear photos of the problem areas
  • The site address and postcode
  • The product your specification calls for
  • Whether an asbestos survey exists

Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.

Why deal with it now?

Refurbishments sometimes budget for new windows when the frames are sound and only the seal has failed. If the frame is in good order, cutting out and resealing the perimeter can be all it needs. We’ll say so if a frame itself is the problem. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Parkhouse, a repair visit takes planning, so it’s better to act early.

We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote and we’ll price your job on its own details.

Why choose Mastic Doctor in Parkhouse

  • Public liability insurance in place
  • Standard and matched colours in many product ranges
  • 12-month guarantee on workmanship
  • A fixed quote before work starts

Read how commercial sealant jobs are priced or how we’re accredited.

Building and refurbishing in Parkhouse

Scotland has its own building regulations, and in Parkhouse warrants come from the local authority verifier. The mastic follows the specification that goes with the warrant. Parkhouse has plenty of hotels close by, all within 2 miles. When hotels extend or refit, the work is typically squeezed between peak periods, mastic included.

For contractors on a campus like Glasgow Caledonian University, which lies south of Parkhouse, facade and perimeter sealing has to fit around students and term dates. Projects at colleges like Glasgow Kelvin College - Springburn Campus (to the south-east of Parkhouse) tend to run to term dates, so the mastic is planned tightly.

Parkhouse is about 1 mile north-east of North Kelvinside, in Glasgow. Anywhere in G22, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. We work across 171 places in Glasgow, from busy centres to rural villages.

Business premises anywhere in G22, G20 and G21 are within our area for mastic packages. Among the streets we cover are Birsay Road, Walnut Road and Balmore Road, and sites on any of them can send details for a fixed quote. Access to Parkhouse is via the A879. Close to Parkhouse, our area also takes in Possilpark (1 mile south), Milton (1 mile north), Lambhill (1 mile west), Cowlairs (1 mile south-east) and Ruchill (1 mile west). A short drive away, we cover Glasgow (3 miles south), Calton (3 miles south), Langside (5 miles south), Yoker (5 miles west), Partick (3 miles south-west) and Mount Florida (5 miles south).

Around Parkhouse

Recent enquiries here include premises near Glasgow University Library and Springburn Park and the streets around them. Parkhouse has its own railway station: Ashfield station. Other landmarks nearby include Ruchill Hospital (0.6 miles south-west) and Heatherbank Museum of Social Work (1.6 miles south). The countryside around Parkhouse includes Hogganfield Loch and Castle Hill.

Map of Parkhouse © OpenStreetMap contributors

When to call us in Parkhouse

A new building moves while it dries and settles. Materials lose construction moisture and shrink. Picking a flexible sealant where there’s movement keeps snags down.

Site and facilities staff are often the first to spot these:

  • Window and door perimeters that won’t pass inspection
  • Different trades sealing to different standards
  • Mastic snags holding up handover
  • Internal caulk splitting as the building dries out

New units and refits on sites such as Cowlairs Industrial Estate (0.5 miles south-east of Parkhouse) need their panel and perimeter joints sealed to the specification.

What to look for in a quote

  • Whether primer will be used where the manufacturer specifies it
  • The terms of the workmanship guarantee
  • What site paperwork they can supply
  • Whether old or failed sealant will be cut out, not overlaid

How to choose a sealant contractor

Accreditations

Trusted. Accredited. Insured.