Mastic contractors in Furzedown
We carry out mastic packages for new-build and refurbishment projects in Furzedown. Send details for a fixed quote.
- Mastic snags holding up handover
- Cracks opening in caulked internal joints
- Window and door perimeters that won’t pass inspection
Need construction mastic in Furzedown?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Construction mastic in Furzedown, done properly
We work to the specification and the programme, not to habit. If a product is named, that’s what goes in; any alternative we suggest is put to you before anything changes. Backing, primer and depth follow what the sealant maker sets out, so the joints perform as the designer intended. We work on brick and block movement joints, internal decorators’ caulk and floor and skirting junctions, and the failures we’re asked to look at most are old sealant on a refurbishment that needs stripping before new work and external joints sealed in damp or cold conditions that are now failing. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Furzedown, that means joint design, primers and backing rod as standard.
Construction in a London area such as Furzedown means working on constrained sites: small compounds, delivery slots and shared hoists and scaffold. Mastic is usually one of the last trades on each elevation or floor, so we keep to the programme and the order of trades the site sets.
The 12-month guarantee covers our workmanship: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Furzedown (SW16, SW17, CR4)
- Region
- Greater London
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Construction mastic in Furzedown: the local picture
As part of Greater London, Furzedown is inside the ULEZ, which applies to every van on site. Delivery slots and scarce storage shape how and when the mastic goes in. A 2-mile radius around Furzedown takes in a number of hotels. Hotel schemes tend to have fixed reopening dates, so the mastic is programmed tightly with the other trades.
Further education sites such as South Thames College Tooting Centre, 0.9 miles west of Furzedown, are extended and refurbished from time to time, with mastic often programmed into the summer break. Recladding or extending a unit at a site like Mitcham Industrial Estate, 0.8 miles to the south of Furzedown, brings panel joints and frame perimeters into the programme. On a healthcare site such as St George's Hospital (1.2 miles west of Furzedown), new blocks and refurbishments go on while the hospital keeps running, so mastic work is sequenced carefully.
Furzedown is about 3 miles east of Wimbledon, in Greater London. We send applicators to Furzedown for mastic packages. Furzedown is one of 764 places in Greater London on our list for mastic packages. Sites around London have their own page, roughly 6 miles from Furzedown.
Business premises anywhere in SW16, SW17 and CR4 are within our area for mastic packages. Streets here include Deal Road, Links Road and Seely Road, and sites on any of them can send details for a fixed quote. Being close to the A216, Furzedown is easy to get to with materials and equipment. Just outside Furzedown, we also work in Streatham Park (1 mile north-east), Tooting (1 mile west), Tooting Bec (1 mile west), Streatham (1 mile east) and Colliers Wood (1 mile south-west). Bigger towns within reach include London (6 miles north-east), City of Westminster (6 miles north), Marylebone (6 miles north), Kensington (6 miles north-west), St Pancras (7 miles north) and Shoreditch (8 miles north-east).
Near you in Furzedown
Locally, jobs take us to sites close to The Holland Tringham pub, Figge's Marsh and Furzedown Secondary School, among other places. For rail, the closest station is Tooting station, roughly 0.6 miles south-west of the centre. Other landmarks nearby include St Benedict's Hospital (under half a mile west) and London Sewing Machine Museum (0.9 miles north-west). Not far away are Battersea Park Lake and Knight's Hill.
Common questions from Furzedown clients
Is hospital work, at somewhere like St George's Hospital, something you do?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Can you work at a site such as Mitcham Industrial Estate, by Furzedown?
Yes, sites like Mitcham Industrial Estate are within our area, along with the rest of Furzedown. Photos and a short description are enough for a first look.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
When can the area be used after sealing?
Curing time varies by product, and we confirm it on the day, and sign any area that should be left alone.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and we will price the work to it.
Is Furzedown in your area?
Yes. Sites across Furzedown are covered, and the same phone number covers every area.
Honest limits
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Designing joint widths or choosing the specification (that sits with the designer)
- Oversized gaps that need packing or adjustment by others
- Faulty frames rather than failed sealant
If in doubt, ring 01277 525 020 or use the quote form and we’ll say what we think.
Where we work in Furzedown
- Window and door perimeters
- Floor and skirting junctions
- Internal decorators’ caulk
- Brick and block movement joints
- Cladding and panel joints
- Sanitary and kitchen joints
Why act early in Furzedown
Sealing over damaged or contaminated new joints might save a day, but it rarely lasts. New sealant laid on old or dirty sealant has nothing to bond to. Damaged joints are removed and resealed from clean faces. Repeat call-outs disrupt occupied London buildings, so a proper job first time, with the old sealant fully removed, is worth it.
The price depends on the quantity of joints, how much old material needs removing and the access. Call for a quote once you have the details.
Why us?
- 12-month guarantee on workmanship
- Colour options checked against the specified product
- Constructionline member for supplier checks
- Joints cleaned back to sound surfaces
Read what affects the cost or our accreditations.
Diagnose, treat, sign off
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. All of Greater London is in the ULEZ, and kerbside space in Furzedown can be scarce. If there’s a loading bay, a car park or a permit we can use, tell us when you send details.
- Drawings, the sealant specification and your programme come to us for pricing.
- We return a fixed quote that ties the mastic package to your programme.
- Any site paperwork you need (RAMS, insurance certificate, CSCS details) is confirmed with the quote.
- Work follows the programme, area by area, as rooms and elevations become ready.
- Joints are cleaned, primed where the maker requires it, backed and sealed to the specification.
- We close out snagging and hand over with a 12-month guarantee.
What we need from you
- Share your working hours and any access restrictions
- Point out parking and an unloading spot
- Tell us which areas need to stay in use
Get a fixed quote
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, phone 01277 525 020 or send photos by email.
Read more
Quoting for work in Furzedown
The price varies from site to site. Expect it to depend on:
- Working within restricted access windows
- Access and working height
- Whether old sealant has to be cut out first
- The site’s rules and procedures
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What we need to price the job
Diagnosis starts before we arrive. Let us know:
- Access details, including height
- Clear photos of the problem areas
- What the building is and how it’s used
- Asbestos survey details if the building is older
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to phone 01277 525 020 or email drawings and photos with what you know.
Maintenance after handover
Problems stay small when the joints are checked regularly. In particular:
- Note which sealant went where at handover
- Stick to the specified sealant rather than a generic substitute
- Brief the final clean team to avoid blades near sealant
- Ask for joint and product checks before the package is urgent
At handover, keep the product details with the O&M information. That helps the building owner maintain the joints later. Tell us what records you need and we’ll confirm with the quote.
Leaving the mastic snag list to the end squeezes everyone. Clearing snags area by area spreads the work out and keeps handover on track.
Owners, agents and contractors
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Furzedown can sit alongside others in a wider programme across Greater London.
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.