Construction and new-build mastic in Dyke, Moray
Construction mastic for Dyke, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- New external sealant already peeling away
- Inconsistent sealant finishes from plot to plot
- Caulk cracking where joints are moving more than expected
Construction mastic across Dyke
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
For managing agents and facilities managers
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
How we handle construction mastic in Dyke
Getting a subcontractor through site induction should be simple. We’re a Constructionline member and CHAS accredited, and every applicator holds a CSCS card. RAMS, an insurance certificate and CSCS details can be confirmed with the quote if you tell us what you need. Most enquiries involve cracks opening in caulked internal joints and early adhesion failures on new external joints, on brick and block movement joints, cladding and panel joints and internal decorators’ caulk. Facilities teams, main contractors and managing agents in Dyke tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
For a site around Dyke, we plan the mastic in as few trips as the programme allows. Send drawings, photographs and the programme so everything needed arrives on the first day.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Dyke (IV36)
- Region
- Moray
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Contractors’ notes for Dyke
The sea is no more than about 3 miles from Dyke. Coastal exposure means perimeter and cladding joints work harder than on an inland job, so we check the specified product suits the exposure before the first bead. Scotland has its own building regulations, and in Dyke warrants come from the local authority verifier. The mastic package follows the approved specification.
New wings at hospitals like Leanchoil Hospital (to the east of Dyke) bring long runs of window and panel joints to seal. New units and refits on sites such as Greshop Industrial Estate (2.3 miles east of Dyke) need their panel and perimeter joints sealed to the specification.
Dyke is about 3 miles west of Forres, in Moray. We cover commercial sites throughout Dyke. Dyke is one of 59 places in Moray on our list. Sites around Aberdeen have their own page, about 66 miles away.
We take on mastic packages across the IV36 postcode area. For a building on Davidson Place, Darklass Road and Fir Park or nearby, we can quote for mastic packages. Nearby places we also cover include Red Craig (2 miles east), Mundole (2 miles south-east), Forres (3 miles east), Auldearn (5 miles south-west) and Rafford (5 miles east). Bigger towns within reach include Elgin (14 miles east), Ashgrove (15 miles east), Burghead (10 miles north-east), Hopeman (12 miles north-east) and Kinloss (6 miles east). For island and remote sites, we plan travel and materials carefully, so the full address helps from the start.
Around Dyke
Dyke’s nearest station is Forres station, roughly 2.6 miles east of the centre. Nearby you will also find Leanchoil Hospital (3.9 miles east) and Brodie Castle (0.7 miles south-west). Open spaces near Dyke include Loch of Blairs and Culbin Sandhills.
How the quote is worked out
Each job is priced on its own details. The main factors are:
- Joint width, depth and condition
- How much existing material needs removing
- Site requirements such as inductions and permits
- The total length or number of joints
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we’ll explain how it’s made up.
Sending details for a quote
The more we know, the firmer the quote. When you get in touch, include:
- What the building is and how it’s used
- Any dates the work must fit around
- How the joints are reached, and at what height
- Approximate linear metres or a joint schedule
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. Smaller jobs need nothing more than photos and a few notes.
What else we do in Dyke
When something else is needed
Being straight saves everyone time. New sealant won’t cure:
- Faulty frames rather than failed sealant
- Deciding which fire-stopping product a penetration needs
- Specifying the product where the designer hasn’t
If in doubt, phone 01277 525 020 or email us and we will say what we think before you book.
Where we work in Dyke
- Floor and skirting junctions
- Window and door perimeters
- Cladding and panel joints
- Sanitary and kitchen joints
- Internal decorators’ caulk
- Brick and block movement joints
Common problems we fix in Dyke
A joint without backing rod or bond-breaker often fails early. Fixed to three faces, the sealant rips the first time the joint opens, so depth is controlled with backing rod or bond-breaker tape.
What tends to prompt an enquiry:
- Snag items on joints that need redoing before handover
- Sanitary sealant damaged by following trades
- Oversized or tapered gaps around new frames
- External joints sealed in damp or cold conditions that are now failing
Older buildings in the area around Dyke, such as Logie House, 4.9 miles to the south of Dyke, need care when sealed: the product has to suit soft or historic materials.
Questions to ask before you book
- How they’ll work around occupants
- Whether primer will be used where the manufacturer specifies it
- Proof of insurance
- What site paperwork they can supply
Should maintenance staff do it?
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Dyke: questions and answers
Does the sea air around Dyke change the choice of sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Do you take on work at healthcare sites like Leanchoil Hospital?
Yes. We work in healthcare settings as well as offices and schools. Work is phased so departments keep running, under the site’s own rules.
What happens if the weather stops external sealing?
Outside, the joint has to be dry and the temperature within the product’s limits. Damp, frost or condensation on frames can stop work so we typically switch to internal work when that happens.
What accreditations do you hold?
We are CHAS accredited and a Constructionline member, with CSCS-carded applicators. We are also fully insured, with five million pounds of public liability cover.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
Do you have public liability insurance?
Yes. We’re fully insured, including public liability cover.
Can you come in just for snagging?
Yes. Damaged, missed or untidy joints are stripped and done again properly to suit the programme.
Our process
Working in a building that stays open takes some planning. We sign and contain the area we’re in, with routes through the building left open and work section by section so the rest of the building stays in use. Travel to smaller Scottish places like Dyke is planned so the job is finished in one visit where possible, so photos, sizes and a full list matter. External joints need a dry spell as well.
- We start with the drawings, specification and programme.
- We take off quantities and return a fixed quote.
- The sequence is agreed with the site manager.
- Plots or floors are sealed as they’re handed over.
- Every joint is cleaned, set to depth and sealed with the specified product.
- After snagging, the work is handed over under our 12-month guarantee.
Before we start on site
- Make sure the joints can be reached
- Arrange parking or a loading space
- Flag any permit to work we will need
Getting a fixed quote
To get a fixed quote, call 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. You can also send details through our quote form.