Mastic contractors in Burridge
Work needed on a mastic package in Burridge? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Missed perimeter joints on a new elevation
- Existing joints on a refurb that need cutting out and resealing
- Sealant knocked or painted over by other trades
Construction mastic across Burridge
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle construction mastic in Burridge
On refurbishments, the mastic package normally includes cutting out old sealant as well as sealing new work. Existing joints have to be stripped back to sound faces, because fresh sealant can’t key into cured silicone. After that, the joints are prepared and sealed to the specification. If you have oversized or tapered gaps around new frames and sanitary sealant damaged by following trades, we can help, on internal decorators’ caulk, window and door perimeters and floor and skirting junctions alike. Facilities teams, main contractors and managing agents in Burridge tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Sites around smaller places like Burridge can be a fair drive from suppliers, so we come with everything the package needs. Send drawings or photographs and the programme and we’ll quote to suit.
Our workmanship is guaranteed for 12 months, in Burridge as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Burridge (PO15, SO31)
- Region
- Hampshire
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
How the job changes by surface
Kitchens and utility areas
Commercial kitchens often need hygienic or food-safe sealants. Joints are sealed smooth so they’re easy to clean.
Internal decorators’ caulk
Where the specification calls for it, acrylic decorators’ caulk goes on non-moving internal gaps before painting. It’s for gaps that stay still and get painted.
Maintenance after handover
Regular inspection catches problems early. In particular:
- Brief the final clean team to avoid blades near sealant
- Stick to the specified sealant rather than a generic substitute
- Check frame gaps are within the sealant’s range before sealing
- Brief following trades on areas that have been sealed
After we have sealed an area, it helps to keep other trades from damaging the joints. Fresh sealant needs its cure time before it’s cleaned, painted near or knocked.
Oversized gaps are a problem better caught early. Sealant stretched over an oversized gap won’t last, so the installer needs to correct it first. We raise them during our first walk of the area.
Sites and facades in and around Burridge
There are several hotels within about 2 miles of Burridge. When hotels extend or refit, the work is normally squeezed between peak periods, mastic included. At about 66 miles from central London, Burridge is within reach of the capital. Towns within reach of London tend to keep building, from flats to offices and schools, which keeps mastic packages in demand.
When a school such as Whiteley Primary School is extended or refurbished, the mastic package is often squeezed into the holidays. Hotel extensions and refits, at places such as Solent Hotel and Spa, 0.9 miles to the south-east of Burridge, normally run between busy periods, so the sealing is squeezed into short windows.
Burridge is about 3 miles south-east of Hedge End, in Hampshire. If you’re looking for construction mastic in Burridge, we can help, as we do across Hampshire. Burridge is one of 723 places in Hampshire on our list. Southampton is covered too, some 6 miles away.
Work on mastic packages is covered throughout PO15 and SO31, for business premises of every kind. We cover commercial and managed buildings on Dumas Drive, Jerome Street and Coleridge Drive. You will find Burridge on or near the A3051, so getting applicators and materials to site is simple. Just outside Burridge, we also work in Whiteley (1 mile south-east), Park Gate (1 mile south), Swanwick (1 mile south-west), Sarisbury (1 mile south-west) and Segensworth (2 miles south-east). Further afield, our area takes in Winchester (12 miles north), Gosport (8 miles south-east), Havant (12 miles east), Eastleigh (7 miles north-west), Fareham (4 miles south-east) and Horndean (11 miles east).
Landmarks near Burridge
We work on buildings around Brookfield Community School and Language College and the streets around them. The closest station to Burridge is Swanwick station, about 1 mile south. Other landmarks nearby include Fareham Community Hospital (1.4 miles south-west) and Bursledon Brickworks Industrial Museum (1.3 miles west). The countryside around Burridge includes Swanwick Lakes.
Do you need construction mastic in Burridge?
Frames installed with uneven gaps make perimeter sealing harder. Every product has limits on how wide a joint it can bridge and gaps beyond it need packing or adjusting by the frame installer. Better to raise it at the start than seal a joint that’s bound to fail.
Look out for the following:
- Snag items on joints that need redoing before handover
- New external sealant already peeling away
- A mastic package split between trades with no clear owner
- Sealant knocked or painted over by other trades
For a contractor working at a hospital such as Fareham Community Hospital, 1.4 miles to the south-west of Burridge, perimeter and facade sealing is planned around patients and deliveries.
Questions to ask before you book
- Their approach to joint depth and backing
- The terms of the workmanship guarantee
- Health and safety accreditation such as CHAS
- Proof of insurance
For managing agents and facilities managers
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
Burridge: questions and answers
Can you work on a hospital site such as Fareham Community Hospital?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Can you work at a site such as Park Gate Business Centre, by Burridge?
Yes. We cover Burridge and the area around it, including industrial estates, business parks and retail parks such as Park Gate Business Centre. Photos and a short description are enough for a first look.
Can you fit around our working hours?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
Can you fit around our programme?
We seal plot by plot or floor by floor as areas are released. The sequence is agreed with the site manager at the start and adjusted as things change.
What site paperwork can you supply?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
Can weather delay the job?
Outside, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Places near Burridge
Other services in Burridge
Diagnose, treat, sign off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work typically takes a day or two on a small fit-out and several weeks on a large multi-storey package, and we clear our waste as we work. For a building around Burridge, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- We walk the site or review drawings to understand the package.
- A fixed quote sets out scope, products and phasing.
- Paperwork is agreed and applicators are inducted on site.
- We seal plot by plot or floor by floor in line with the programme.
- Problems we find, such as oversized gaps, are raised straight away.
- Final snagging is completed and the 12-month guarantee applies.
Getting the site ready
- Let us know about inductions and permits
- Make sure the joints can be reached
- Share your working hours and any access restrictions
Getting a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or speak to us on 01277 525 020 or send photos by email to discuss it first.
Related advice
What sets the cost
These are the things that shape the price:
- Whether old sealant has to be cut out first
- Any access equipment needed
- The size and state of each joint
- Location, for remote and island sites
The price depends on how many linear metres there are, what has to come out first and the access. Call for a fixed quote once you have the details.
Sending details for a quote
It doesn’t need to be a full survey. A few details are enough to get going:
- Photos of the joints, close up and from further back
- Rough lengths or quantities, or drawings if you have them
- What the building is and how it’s used
- Specification clauses that apply
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, speak to us on 01277 525 020 or email us.