Coloured Sealant in Burridge
Coloured and colour-matched sealant for visible joints in Burridge. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Joints that need to match a new RAL frame colour
- Patch repairs in several different colours
- Untidy coloured beads with ragged edges
Coloured sealant across Burridge
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Should maintenance staff do it?
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
Coloured sealant for commercial buildings in Burridge
In retail, hospitality and office fit-outs, joints are seen close up every day. A mismatched bead can make good joinery look unfinished, however well it was installed. We pick a colour from the product’s range that sits with the finish. If you have a bead that fights the cladding or frame colour and sealant that no longer suits recoated frames, we can help, on cladding panels, powder-coated and anodised frames and hotel bathrooms and public areas alike. A single leaking joint is often how a building in Burridge first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
In and around smaller places such as Burridge, the commercial buildings we’re asked about are often pubs, shops, village halls and barns converted to offices. Kitchens, toilets and window frames in all of them need resealing sooner or later.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Burridge (PO15, SO31)
- Region
- Hampshire
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Commercial clients in Burridge
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Burridge can sit alongside others in a wider programme.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.
Places near Burridge
More services for Burridge
Common questions from Burridge clients
Must a hotel around Burridge close while you work?
Rarely. Rooms or floors are done in turn, so the rest of the hotel keeps trading. We agree the order of rooms and the timings with you before we start.
Can you work at a site such as Park Gate Business Centre, by Burridge?
Yes. We cover Burridge and the area around it, including industrial estates, business parks and retail parks such as Park Gate Business Centre. A few photos and the unit address let us price the work.
Can staff carry on working while you are here?
Yes, with some planning. Tell us your site hours and access windows and we’ll plan around them.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Is coloured sealant weaker than white?
The colour doesn’t change what kind of sealant it is. A properly prepared and tooled joint performs as the product intends in any colour.
How long do sealant joints last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Who decides which product is used?
A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Aftercare for building managers
A few simple habits keep the new joints working:
- Avoid piecemeal repairs on coloured joints
- Insist on the agreed colour for any repair
- Keep the colour details for future repairs
- Approve a sample bead on high-profile areas
Check visible joints during routine inspections. Watch for cracks, peeling or discolouration, and plan resealing before it looks tired.
Include coloured joints in a planned maintenance cycle. Replacing them on a schedule keeps finishes looking right over the years.
Our process
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. For work around Burridge, we aim to finish in one visit, so photographs and measurements up front really help. Then the right materials arrive with us.
- We start with photographs, drawings or a visit to see the finishes.
- Colour options from the specified product’s range are shared with you.
- Tell us your site hours and access windows and we’ll plan around them.
- Joints are prepared, primed where specified and backed.
- We seal in the approved colour and tool it smooth.
Before we start on site
- Send any specification or drawings in advance
- Make sure the joints can be reached
- Let us know about inductions and permits
Getting a fixed quote
To get a fixed quote, phone 01277 525 020 or email the details over with the site address and an outline of the work. Our quote form is another easy route.
Advice
Common problems we fix in Burridge
Patch repairs in a different colour are a common problem. Different products and batches used over the years leave a patchwork. Resealing a whole run in one agreed colour tidies it up.
Most enquiries start with something like this:
- Weathered sealant that no longer matches
- Marked sealant in hotel bathrooms
- Sealant that no longer suits recoated frames
- Hotel refurbishments with a set colour scheme
A hotel such as Solent Hotel and Spa, 0.9 miles to the south-east of Burridge, shows how much sealant a hospitality building has on show, from bathroom joints to the bar.
What your quote should include
- Do they follow the manufacturer’s priming guidance?
- How the existing material will be dealt with
- Their pre-qualification and accreditations
- Their approach to joint depth and backing
Cost factors for colour-matched joints
To price the job, we consider:
- Whether old sealant has to be cut out first
- Induction, permit and paperwork requirements
- How much there is to seal
- Phasing around occupants
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What to include in your enquiry
A good diagnosis starts with the right details. Let us know:
- Asbestos survey details if the building is older
- Rough lengths or quantities, or drawings if you have them
- Photos of the joints, close up and from further back
- Whether the building will be occupied during the work
Need a figure for a tender or a budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, phone 01277 525 020 or email drawings and photos.
Sealant on show in Burridge’s commercial buildings
A number of hotels sit less than 2 miles from Burridge. In hotels, sealant shows everywhere, from bathroom joints to reception counters, so colour and a clean finish matter. At about 66 miles from central London, Burridge is within reach of the capital. The commuter belt holds a great many offices, retail parks and business parks. Occupiers with several premises in the region tend to prefer one contractor and one point of contact.
Units at places like Hedge End Retail Park, 2.9 miles north-west of Burridge, are refitted as brands change, and the joints have to suit each new scheme. Sites a few miles apart, such as Park Gate Business Centre and Solent Business Park, can share one programme and one point of contact.
Burridge is about 3 miles south-east of Hedge End, in Hampshire. We cover Burridge, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Burridge is one of 723 places we cover in Hampshire for colour-matched joints. There’s a separate page for Southampton, roughly 6 miles from Burridge.
Postcode districts covered here: PO15 and SO31. We cover commercial and managed buildings on Dumas Drive, Jerome Street and Coleridge Drive and the roads nearby. With the A3051 nearby, Burridge is straightforward for us to reach. Close to Burridge, our area also takes in Whiteley (1 mile south-east), Park Gate (1 mile south), Swanwick (1 mile south-west), Sarisbury (1 mile south-west) and Segensworth (2 miles south-east). Further afield, our area takes in Winchester (12 miles north), Gosport (8 miles south-east), Havant (12 miles east), Eastleigh (7 miles north-west), Fareham (4 miles south-east) and Horndean (11 miles east).
What’s near Burridge
Around Burridge, our work takes us to commercial buildings near Brookfield Community School and Language College. For rail, the closest station is Swanwick station, roughly 1 mile south. A little further out are Fareham Community Hospital (1.4 miles south-west) and Bursledon Brickworks Industrial Museum (1.3 miles west). The countryside around Burridge includes Swanwick Lakes.