Sealant applicators in Burridge
Commercial sealant contractors in Burridge, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Frame mastic that has hardened and come away from the wall
- Black mould through washroom sealant that won’t clean off
- Damp patches where an external joint has failed
Commercial sealant contractors across Burridge
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Our process
At the end of each section, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area. For work around Burridge, we aim to finish in one visit, so photographs and measurements up front really help. Then the right materials arrive with us.
- You send photos, drawings or a list of the joints and areas involved.
- Next comes a diagnosis and a fixed quote.
- Site hours, access windows and the order of areas are agreed before we start.
- We strip the failed bead and prepare both faces of the joint.
- The depth is set, primer is used where the maker calls for it, and the fresh bead is applied and tooled.
- Each area is inspected, signed off and backed by our 12-month guarantee.
Getting the site ready
- Send your site hours and access windows
- Tell staff and tenants when we’ll be in
- Make sure the joints can be reached
Ask for a quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Read more
About our commercial sealant contractors in Burridge
A reseal stands or falls on the preparation underneath it. Silicone has no grip on cured silicone, so the failed bead is cut out completely, then both faces are cleaned back to sound, dry material with no dust or grease on them. Where the sealant maker specifies a primer for that substrate, it goes on before the new bead, and a backing rod limits the depth to give the sealant room to work. If you have movement joints packed with grit and debris and black mould through washroom sealant that won’t clean off, we can put it right. Whoever orders the work in Burridge, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
In an occupied building in Burridge, the job is planned so areas stay in use: washrooms in turn, floors in sections and entrances kept open.
A job in a smaller place like Burridge is typically a single building. We will want a full list and photos first, so the right products come on the day and nothing waits for a second trip.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Location
- Burridge (PO15, SO31)
- Region
- Hampshire
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
When it isn’t the sealant
A few problems need another trade or a different fix, and we say so rather than covering them up:
- A failed roof covering or waterproofing membrane
- Structural cracks or movement the joints weren’t designed for
- Removing asbestos-containing materials (a licensed or specialist contractor’s job)
Not sure which it is? You can call the office on 01277 525 020 or use the quote form and we will tell you honestly.
Where we work in Burridge
- Floor and threshold joints
- Movement joints in walls and floors
- Washrooms and tea points
- Kitchen worktops and splashbacks
- External facade joints
- Window and door perimeters
What Burridge’s businesses ask us to seal
At about 66 miles from central London, Burridge is within reach of the capital. The South East around the capital has large numbers of business parks, offices and retail centres, especially around the motorway corridors. If you have premises across the region, one contractor can cover them all. The South East is one of the drier parts of the UK. Drier doesn’t mean dry every day, so frontage work still has some give in the dates.
Shops and cafés around stations like Swanwick station (1 mile south of Burridge) trade from early, so work is timed around them. Units at places like Hedge End Retail Park (2.9 miles north-west of Burridge) are refitted as brands change, and the joints have to suit each new scheme.
Burridge is about 3 miles south-east of Hedge End, in Hampshire. Across the PO15 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Burridge is one of 723 places in Hampshire on our list for sealant joints. Our Southampton page has more on work in that area.
We take on sealant joints across the PO15 and SO31 postcode area, whatever the building. Streets here include Dumas Drive, Jerome Street and Coleridge Drive. You will find Burridge on or near the A3051. We also cover Whiteley (1 mile south-east), Park Gate (1 mile south), Swanwick (1 mile south-west), Sarisbury (1 mile south-west) and Segensworth (2 miles south-east) for sealant joints. Bigger towns within reach include Winchester (12 miles north), Gosport (8 miles south-east), Havant (12 miles east), Eastleigh (7 miles north-west), Fareham (4 miles south-east) and Horndean (11 miles east).
Landmarks near Burridge
Locally, jobs take us to sites close to Brookfield Community School and Language College, among other places. Burridge’s nearest station is Swanwick station, roughly 1 mile south of the centre. A little further out are Fareham Community Hospital (1.4 miles south-west) and Bursledon Brickworks Industrial Museum (1.3 miles west). Open spaces near Burridge include Swanwick Lakes.
Work for main contractors and building owners
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Burridge can form part of a wider programme.
Towns and villages near Burridge
More services for Burridge
Doing it in-house
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
When to call us in Burridge
A split down the middle of the bead tells a different story. Usually the movement was too much for the sealant chosen. The same product in the same joint tends to fail the same way, so width, depth and product are checked before we quote.
Typical triggers for a call:
- Frame sealant that has cracked, shrunk or pulled away
- Hardened, chalky sealant on south-facing or exposed elevations
- Movement joints packed with grit and debris
- Untidy joints in a reception, shop floor or lobby
A business with units at Park Gate Business Centre and Solent Business Park needn’t use two contractors for its sealant.
What your quote should include
- The terms of the workmanship guarantee
- Whether old or failed sealant will be cut out, not overlaid
- The named product and why it was chosen
- Whether primer will be used where the manufacturer specifies it
Questions we’re asked in Burridge
Is Burridge too small for you to travel to?
Not at all. Burridge is within our area. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.
Can you work at a site such as Park Gate Business Centre, by Burridge?
Yes, sites like Park Gate Business Centre are within our area, along with the rest of Burridge. Send details of the unit and the work through our quote form for a quick quote.
Can weather delay the job?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
Can you take on work for an FM or managing agent?
Yes. We quote, schedule and report back in the way that suits your process.
What the job involves on each surface
Washrooms and toilets
Black sealant in a toilet block is normally beyond cleaning. The lasting answer is removal, preparation and a new sanitary bead.
Fire-rated seals where specified
Not every penetration suits a sealant. Other products, such as collars, wraps and batts, are specified for different services, so we’ll flag it if the detail needs a different product.