Fraserburgh commercial sealant contractors
Sealant work in Fraserburgh for main contractors, managing agents and facilities managers: sealant work for offices, shops, hotels and other commercial buildings, quoted at a fixed price.
- Sanitary sealant that has gone black and patchy
- Window and door perimeter joints that have cracked open
- Water staining near frames, panels or ceilings
Need commercial sealant contractors in Fraserburgh?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Commercial sealant contractors for commercial buildings in Fraserburgh
Pricing a commercial reseal is a short process. Send photographs, drawings or a schedule of the joints through our quote form and you can also call 01277 525 020 or email a schedule or drawings to talk it through. Where the photographs don’t tell the full story, we arrange a site visit, and a fixed quote for the agreed scope follows. Most enquiries involve a top-up bead over failed sealant, now lifting and greasy, split joints in a kitchen or tea point, across floor and threshold joints, window and door perimeters and movement joints in walls and floors. Looking for mastic applicators who cover Fraserburgh? We’ve been sealing commercial buildings since 2005.
Quotes for commercial sealant in Fraserburgh can come from photographs and a joint schedule, or from a walk-round, and the scope is set out in writing.
Businesses and landlords in towns like Fraserburgh often have several premises to keep in order. Bringing the sealant for every building under one contractor and one quote saves time.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Where
- Fraserburgh (AB43)
- Wider area
- Aberdeenshire
- Guarantee
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
What we’re called out for in Fraserburgh
When a bead peels cleanly off one face, it has failed in adhesion. The usual causes are poor preparation, a missed primer, contamination on the joint face or sealant bonded to the base of the joint. It’s one of the commonest faults we find on earlier work.
Most enquiries start with one or more of the following:
- Weathered facade sealant that no longer flexes
- Movement joints packed with grit and debris
- Smeared sealant across finishes from a rushed job
- Window and door perimeter joints that have cracked open
For any commercial premises in Fraserburgh, a lasting joint depends on full removal of the old sealant and clean, dry faces.
Comparing quotes
- Is the sealant right for the movement and the substrate?
- The terms of the workmanship guarantee
- Are they CHAS accredited or on Constructionline?
- How the existing material will be dealt with
Towns and villages near Fraserburgh
Other services in Fraserburgh
How a job runs
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Several buildings in and around Fraserburgh can be done on one programme. Give us access times for each.
- We begin with whatever information you have, whether that’s photographs, a drawing or a list of locations.
- The failure is diagnosed and a fixed quote issued for the work agreed.
- We plan around your site hours and access windows, phasing the work where areas have to stay in use.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- Backing and primer go in where needed, then the chosen sealant is applied and tooled.
- Each area is inspected, signed off and backed by our 12-month guarantee.
Preparing the site
- Tell staff and tenants when we will be in
- Move anything stored against the joints
- Flag any permit to work we will need
Get a fixed quote
Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. For a chat about it beforehand, phone 01277 525 020 or send photos by email.
Advice
What we can’t put right
Not every problem is a sealant problem, and we are upfront when that’s the case. These need a different solution:
- Leaks from pipework, wastes or valves (that’s plumbing)
- Walls or slabs moving more than any sealant can take
- Leaking roofs, gutters or flat-roof membranes (those need a roofer)
If in doubt, give us a call on 01277 525 020 or email drawings and photos and we will say what we think before you book.
What we seal
- Movement joints in walls and floors
- Washrooms and tea points
- Kitchen worktops and splashbacks
- Window and door perimeters
- Floor and threshold joints
- External facade joints
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Share these points with them:
- Have extract fans checked so wet areas dry out
- Check sealant as part of routine building inspections
- Check joints after other trades have worked nearby
- Make sure contractors see the asbestos survey before cutting out old mastic
Our workmanship on each job is backed by a 12-month guarantee. File the handover note with the building records, and tell us if a joint we sealed gives trouble within that time.
Each spell of wet weather pushes more water through an open joint. Behind a panel or frame, that water can sit unseen for a long time. Resealing early keeps the problem in the sealant and out of the building.
Why it’s worth doing now in Fraserburgh
On many buildings the mastic was done by whichever trade was on site. Choosing the product, setting the depth and preparing the faces are what a specialist brings. It shows over the following seasons rather than at handover. In Fraserburgh, rain and frost work into any failed joint, and the damage spreads from there. Catch it early and it stays a sealant job.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
Why us?
- Colour options checked against the specified product
- Specification-led, product-correct work
- 12 months’ guarantee on every job
- Joints cleaned back to sound surfaces
Read our cost guide and our accreditations.
Questions about Fraserburgh
Must a hotel around Fraserburgh close while you work?
Rarely, if ever. We take a few rooms out at a time. Tell us your quiet periods and access windows and we’ll plan around them.
Our building in Fraserburgh is near the coast: does that change the sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Do you work for facilities managers and managing agents?
Yes. Use our quote form to send the site details, or phone or email us, and tell us what site paperwork you need.
Which sealant will you use?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Could the old sealant in an older building contain asbestos?
It can, on some older buildings. That’s why we ask for the asbestos information first, and stop if a material is suspect until it’s tested.
Which site documents can you send us?
We’ll confirm the paperwork you need, such as RAMS, an insurance certificate or CSCS details, with the quote. We are CHAS accredited and a Constructionline member, with five million pounds of public liability insurance.
Site staff or a sealant specialist?
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Shops, offices and hotels in and around Fraserburgh
Fraserburgh is within about 1 mile of the coast. Buildings near the sea put their external joints through more driven rain, with salt air nearer the beach. We choose a product rated for the exposure, then confirm the colours available for it. Two care or nursing homes sit less than 2 miles from Fraserburgh. Care homes need tidy, cleanable joints in kitchens, corridors and communal rooms.
Trade counters and showrooms on estates such as Kessock Road Industrial Estate (to the east of Fraserburgh) need neat joints where clients see them.
Fraserburgh is about 37 miles north of Aberdeen, in Aberdeenshire. We cover commercial sites throughout Fraserburgh, whether it’s a single job or part of a planned programme. Across Aberdeenshire, 179 places are covered, Fraserburgh among them. Our Aberdeen page has more on work in that area, about 37 miles away.
Work on sealant joints is covered throughout AB43, whatever the building. Buildings on High Street, Main Street and Thompson Terrace are within our area. Main routes into Fraserburgh include the A90 and A98. Sites close to Fraserburgh are covered too, including Broadsea (1 mile north), Sandhaven (2 miles north-west), Pittulie (2 miles north-west), Memsie (3 miles south-west) and Inverallochy (3 miles east). Bigger towns within reach include Peterhead (15 miles south-east), Roanheads (15 miles south-east), Clerkhill (15 miles south-east), Port Henry (15 miles south-east), Mintlaw (11 miles south) and Longside (12 miles south). Fraserburgh is one of the busier places in Aberdeenshire, and we take on sealant joints for its commercial and public buildings.
Around Fraserburgh
Locally, jobs take us to sites close to The Saltoun Inn and the streets around them. Well-known places in the area include Fraserburgh Hospital (under half a mile north) and Fraserburgh Heritage Centre (0.9 miles north-east).