Sealant applicators in Lower Burgate
Need commercial sealant contractors in Lower Burgate? It’s simple: send details, get a quote, we seal, guaranteed.
- Window and door perimeter joints that have cracked open
- Weathered facade sealant that no longer flexes
- Wall and floor joints that have lost their seal
Commercial sealant contractors for Lower Burgate sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Commercial mastic work in Lower Burgate
On older buildings, particularly those put up before 2000, some old mastics and sealants may contain asbestos. We ask to see the asbestos register or survey before old sealant is disturbed, since managing asbestos is the dutyholder’s responsibility. Anything suspect is left alone until it has been tested, and we don’t remove asbestos-containing materials ourselves. If you have window and door perimeter joints that have cracked open and smeared sealant across finishes from a rushed job, we can put it right, on washrooms and tea points, window and door perimeters and external facade joints alike. Looking for mastic applicators who cover Lower Burgate? We have been sealing commercial buildings since 2005.
Occupied buildings in Lower Burgate need the work phased: we agree the order with you and hand back each area with its cure time.
Commercial sealant work around smaller places like Lower Burgate tends to mean pubs and restaurants, halls, farm shops and offices in converted farm buildings. Kitchens, toilets and window frames in all of them need resealing sooner or later.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Lower Burgate (SP6)
- Wider area
- Hampshire
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Signs you need commercial sealant contractors in Lower Burgate
In wet areas the enemy is normally mould rather than movement. Constant moisture, cleaning chemicals and weak extraction let mould grow into the sealant; when mould is in the body of the sealant, no cleaner will shift it. Replacement with a sanitary anti-mould silicone is the lasting answer.
Things that usually lead to an enquiry:
- Damp patches where an external joint has failed
- Greasy, split joints in a kitchen or tea point
- Mouldy silicone around WCs, urinals and vanity tops
- A top-up bead over failed sealant, now lifting
A unit on an estate like Arch Farm Industrial Estate (to the west of Lower Burgate) typically has an office front, a trade counter and staff facilities with joints of their own.
Before you book anyone
- The terms of the workmanship guarantee
- How they’ll work around occupants
- Whether old or failed sealant will be cut out, not overlaid
- How the joint faces will be prepared and primed
Frontages, fit-outs and joints in Lower Burgate
Less than 3 miles from Lower Burgate there are at least three named estates and business parks. Each new occupier on a park like these tends to refit, from reception to staff kitchen; brand colours often come into it. Rainfall across the South East, Lower Burgate included, is lower than in many parts of the UK. That helps, but frost and condensation on glass and coated frames still stop outside sealing on some winter mornings.
A business with units at Arch Farm Industrial Estate and Fordingbridge Business Park needn’t use two contractors for its sealant. In hotels such as Greyhound Hotel, 0.8 miles to the south of Lower Burgate, refurbishments usually mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes.
Lower Burgate is in Hampshire. Across the SP6 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Across Hampshire, 723 places are covered, Lower Burgate among them. Southampton is covered too, around 17 miles from Lower Burgate.
We take on sealant joints across the SP6 postcode area. Buildings on Kingfisher Drive, Grebe Place and Salisbury Road are within our area. Sites close to Lower Burgate are covered too, including Tinkers Cross (1 mile west), Upper Burgate (1 mile north), Fordingbridge (1 mile south-west), Horseport (1 mile south) and Criddlestyle (1 mile south-east). A short drive away, we cover Totton (12 miles east), Romsey (14 miles east), New Milton (14 miles south-east), Ringwood (6 miles south), Barton on Sea (15 miles south) and Marchwood (15 miles east).
What’s near Lower Burgate
Locally, jobs take us to sites close to Fordingbridge Infant School and The George Inn, among other places. Nearby you’ll also find Godshill Castle Hill (1 mile east) and Fordingbridge Museum (0.8 miles south). The countryside around Lower Burgate includes Blashford Lakes.
For managing agents and facilities managers
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
From enquiry to sign-off
Occupied buildings need a little choreography. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. If others near Lower Burgate need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.
- Site photographs, drawings or a visit tell us what’s there and how it has failed.
- A fixed quote follows, with removal and preparation included.
- Sequence, access and working times are settled before the first joint is touched.
- Each joint is stripped, cleaned back to sound faces and primed where the maker specifies.
- Depth is set with backing, then the sealant is applied, tooled and the area tidied.
- We hand back each area with its cure time and our 12-month guarantee.
Getting the site ready
- Point out parking and an unloading spot
- For older buildings, check the asbestos register before work
- Let us know about inductions and permits
Request a quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Advice
When to bring in a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Also near Lower Burgate
More services for Lower Burgate
Common questions from Lower Burgate clients
Is a smaller place like Lower Burgate outside your area?
Not at all. Lower Burgate is within our area. Our area covers London and the South East counties. Where we can, we group nearby jobs to make the most of each trip.
Can the sealant on our Lower Burgate premises match the finishes?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. The quote lists the colours the product is made in.
When is resealing likely to be due?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Does commercial sealant work come with a guarantee?
The work is guaranteed for 12 months. Should a joint we sealed give trouble during those 12 months, let us know and we will look at it.
How many days will you need on site?
The duration is planned around your programme and the access we’re given. You’ll have an expected duration with the quote.
Can you take on work for an FM or managing agent?
Yes, and through main contractors too. We quote, schedule and report back in the way that suits your process.
How do we get a quote?
Send what you have, even a few photos and rough lengths. We follow up with questions or a visit where needed, then a fixed quote.
Honest limits
Sealant solves a lot, but not everything, and we’re upfront when that’s the case. These need a different solution:
- A dripping trap, valve or pipe behind a fitting
- Misted, cracked or failed glazing units (a glazier’s job)
- A failed roof covering or waterproofing membrane
Not sure which it is? You can speak to us on 01277 525 020 or send details through our quote form and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Floor and threshold joints
- Washrooms and tea points
- External facade joints
- Window and door perimeters
- Movement joints in walls and floors
- Kitchen worktops and splashbacks
How the quote is worked out
What shapes the price:
- How accessible the joints are
- Quantities, in metres or numbers
- Working within restricted access windows
- Travel to remote or island sites
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
What we need to price the job
There’s no need for a formal survey. A few details are enough to get going:
- Drawings or a marked-up plan, if available
- When you need the work done
- The site address and postcode
- Photos of the joints, close up and from further back
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. For smaller jobs, photographs and a description will do.