The Mastic Doctor team standing beside their branded vans outside an office building
Hampshire · England

Floor Joint Sealing contractors in Lower Burgate

Planning work on a floor joint in Lower Burgate? We look at it, seal it with the right product and hand it over with a 12-month guarantee.

  • Cracked and crumbling joint fill
  • Soft sealant dragged out of trafficked joints
  • A gap opening alongside old joint filler
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
12-month guarantee on our workmanship.
Covering the South East & Scotland
CHAS accredited
£5m public liability

Floor joint sealing across Lower Burgate

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

General trades versus a specialist

Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong typically costs more in the end than doing them right.

Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.

Floor joint sealing in Lower Burgate, done properly

Most industrial slabs are divided into panels by saw-cut joints and construction joints, and every one of those joints is an exposed edge under hard wheels. Our job is to put the right filler or sealant into them for the loads and the movement they see so the edges are held up and debris can’t pack in. Most enquiries involve soft sealant dragged out of trafficked joints and saw-cut joints left open and packed with grit, across joints along racking aisles, saw-cut induced joints and construction joints. Looking for mastic applicators who cover Lower Burgate? Mastic Doctor has worked for contractors, FMs and building owners since 2005, CHAS accredited and a Constructionline member.

In and around smaller places like Lower Burgate, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.

Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.

The Mastic Doctor team beside their liveried vans in front of an office building
Place
Lower Burgate (SP6)
Region
Hampshire
Cover
12 months on our workmanship
Quote
Fixed quote, scope in writing
Telephone
01277 525 020
Page updated
3 November 2026

Where floor joints take the most wear near Lower Burgate

The 3 miles around Lower Burgate take in at least three named trading estates, business parks or retail parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic. The South East is one of the drier parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and gritting in cold spells finds its way into open joints.

At places like Fordingbridge Business Park (1.2 miles south-west of Lower Burgate), joints are sealed a section at a time so operations carry on. For a school such as The Burgate School and Sixth Form, playground and building joints can be done in the holidays. If you manage units on an estate such as Arch Farm Industrial Estate, which lies west of Lower Burgate, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.

Lower Burgate is in Hampshire. Lower Burgate sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Hampshire, 723 places are covered, including Lower Burgate. There’s a separate page for Southampton, roughly 17 miles from Lower Burgate.

Work on floor joints is covered throughout SP6. Streets here include Kingfisher Drive, Grebe Place and Salisbury Road, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Tinkers Cross (1 mile west), Upper Burgate (1 mile north), Fordingbridge (1 mile south-west), Horseport (1 mile south) and Criddlestyle (1 mile south-east). A short drive away, we cover Totton (12 miles east), Romsey (14 miles east), New Milton (14 miles south-east), Ringwood (6 miles south), Barton on Sea (15 miles south) and Marchwood (15 miles east).

Near you in Lower Burgate

Recent enquiries here include premises near Fordingbridge Infant School and The George Inn and the streets around them. A little further out are Godshill Castle Hill (1 mile east) and Fordingbridge Museum (0.8 miles south). The countryside around Lower Burgate includes Blashford Lakes.

Map of Lower Burgate © OpenStreetMap contributors

Common questions from Lower Burgate clients

Is Lower Burgate too far out for you?

No. Places such as Lower Burgate are covered as much as the big towns. Our area covers London and the South East counties. Where we can, we group nearby jobs to make the most of each trip.

Do you take on work at healthcare sites like Fordingbridge Hospital?

Yes, hospitals are one of the sectors we cover. Each area is agreed with the ward or department and the estates team in advance.

How do you choose the sealant?

The specification comes first, if there is one. Without one, the joint decides: its movement, its surfaces and what it has to cope with.

Will your applicators have CSCS cards?

Yes. We use CSCS-carded applicators, as many construction sites ask for.

Is it fine to apply new sealant on top of old?

No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.

Do you offer coloured sealant?

It depends on the product specified. Some ranges offer many colours, others very few, so we will confirm the colours available for the specified product with the quote.

Can you follow the specification on our project?

Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it, flagging anything that needs clarifying.

Keeping the joints sound

Keep the joints in good shape with a few simple steps:

  • Treat loading bay joints first if they’re failing
  • Respect the cure time before traffic returns
  • Mention any aggressive cleaning regime at quote stage
  • Ask drivers not to drag forks or pallets

On younger slabs, a fine line can open down one side of a filled joint as the concrete keeps shrinking. That is common and is usually dealt with by topping up once the slab has settled down.

Every vehicle on a busy aisle hits a damaged joint. Sorting it early looks after your equipment as well as the slab.

What we can’t put right

Not every problem is a sealant problem, and we are upfront when that’s the case. It won’t fix:

  • Structural cracking in the slab
  • Spalled arrises, which need an edge repair first
  • Damaged or worn floor coatings and screeds

If in doubt, give us a call on 01277 525 020 or email drawings and photos and we will say what we think before you book.

Where we work in Lower Burgate

  • Loading bays
  • Saw-cut induced joints
  • Forklift and pallet-truck routes
  • Construction joints
  • Joints along racking aisles
  • Retail and showroom floors

Owners, agents and contractors

Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules.

We work for building owners and managing agents on sealant work across single buildings or whole portfolios. Several sites can go on one quote, which keeps the paperwork simple.

Diagnose, treat, sign off

In a busy building, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then reopened once the sealant allows before the next one starts. If others near Lower Burgate need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.

  1. We agree the traffic routes and phasing with your site team.
  2. Any joints with broken edges are flagged before work starts.
  3. We clear each run back to clean concrete.
  4. The chosen filler or sealant goes in flush with the slab.
  5. You get a time for each zone to reopen.

Preparing the site

  • Tell us your opening times and when work is allowed
  • Point out parking and an unloading spot
  • Make sure the joints can be reached

Getting a fixed quote

Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to give us a call on 01277 525 020 or send details through our quote form.

Get a price

Read more

What affects the price in Lower Burgate

A fixed quote reflects the actual work. It takes account of:

  • The total length or number of joints
  • The product specified
  • How accessible the joints are
  • Travel to remote or island sites

A quote for floor joints depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.

Before you send an enquiry

For an accurate fixed quote, we need to understand the site. Send us:

  • Asbestos survey details if the building is older
  • Clear photos of the problem areas
  • Any specification or named product
  • Anything awkward about access or site hours

We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, call the office on 01277 525 020 or email us.

Accreditations

Trusted. Accredited. Insured.