Coloured Sealant in Trinity
We carry out coloured and colour-matched sealant for visible joints in Trinity and the surrounding area. Send details for a fixed quote.
- A run of joints in mismatched shades
- Fit-outs with a sealant colour in the specification
- White or grey sealant that clashes with the finish
Coloured sealant for Trinity sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Coloured sealant for commercial buildings in Trinity
Colour is often written into the specification, by RAL reference or by matching a sample. Most sealant types are made in a broad range of standard colours, so we check what the specified product is made in at quote stage. An exact bespoke match can’t always be promised, so we talk you through the nearest colours. We work on shop-fit joinery and counters, office fit-out finishes and powder-coated and anodised frames, and what we’re called in for most is failed coloured sealant that has split or peeled and standard-colour sealant spoiling a high-end finish. Searching for sealant specialists in Trinity? We have been sealing commercial buildings since 2005.
In Scotland’s cities, commercial premises are packed closely, from stone-fronted offices to shops on the ground floor of tenement blocks. Where a shop sits below tenement flats, work on the frontage or shared parts may involve the property factor.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Place
- Trinity (EH5, EH6, EH3)
- Region
- Edinburgh
- Cover
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Coloured sealant around Trinity: points for this area
With the shore within about 1 mile, Trinity counts as a coastal location. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. We choose a product rated for the exposure, then confirm the colours available for it. Trinity has five care or nursing homes no more than 2 miles away. Kitchens and communal rooms in care settings are cleaned constantly, so their joints need to be smooth and sound; colours can be chosen to suit the interior.
On estates like North Leith Sands Industrial Estate, 0.7 miles east of Trinity, the office and welfare end of each unit has its own sealant to maintain. For a hotel such as Victoria Park House Hotel, which lies south-east of Trinity, the colour of a joint at the bar or the bath matters to the look of the room. Units at places like Granton Retail Park (1 mile west of Trinity) are refitted as brands change, and the joints have to suit each new scheme.
Trinity is about 2 miles north of Edinburgh, in Edinburgh. Our applicators travel to Trinity for work on colour-matched joints, handled exactly as we handle every other area. We work across 174 places in Edinburgh.
Anyone looking for coloured sealant in EH5, EH6 and EH3 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on York Road, Park Road and Clark Road or close by, we can quote for colour-matched joints. Being close to the A901 and A903, Trinity is straightforward for us to reach. Close to Trinity, our area also takes in Goldenacre (1 mile south-west), Warriston (1 mile south), Boswall (1 mile west), Inverleith (1 mile south-west) and Granton (1 mile west). Nearby towns on our patch include Sciennes (3 miles south), Merchiston (3 miles south), Newington (3 miles south), Queensferry (8 miles west), Burgh Muir (3 miles south) and South Portobello (4 miles south-east).
Near you in Trinity
In Trinity, that means premises near Starbank Arms, Drummond Community High School and Starbank Park and the streets around them. Trinity’s nearest station is Edinburgh Waverley station, roughly 1.8 miles south of the centre. Nearby you will also find Leith Hospital (0.9 miles east) and Newhaven Heritage Museum (less than half a mile north-east). Green spaces nearby include Salisbury Crags and The New Leaf Co-op.
On site: what to expect
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. City jobs in Trinity typically need parking and loading planned. Shared closes, stairs and the property factor may need to be part of the plan.
- We start with photos, drawings or a visit to see the finishes.
- We send the closest colours from the product’s range.
- Tell us your site hours and access windows and we’ll plan around them.
- Joints are prepared, primed where specified and backed.
- The agreed colour is installed and tooled neatly.
What we need from you
- Agree which areas must stay open
- Arrange parking or a loading space
- Tell us your opening times and when work is allowed
Quotes
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. For a chat about it beforehand, call 01277 525 020 or email the details over.
Advice
Should maintenance staff do it?
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Work for main contractors and building owners
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Cost factors for colour-matched joints
What shapes the price:
- The total length or number of joints
- Access and working height
- Whether old sealant has to be cut out first
- Working within restricted access windows
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
Sending details for a quote
A few photographs plus some basic facts will normally do. It helps to include:
- Your programme or deadline
- Drawings or a marked-up plan, if available
- The asbestos register, for older buildings
- Any specification or named product
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. Smaller jobs need nothing more than photos and a few notes.
Your questions answered
Is North Leith Sands Industrial Estate, near Trinity, within your area?
Yes, sites like North Leith Sands Industrial Estate are within our area, along with the rest of Trinity. To start, just call 01277 525 020 or email us with the unit, the joints involved and your access times.
Can being near the sea in Trinity affect the sealant we need?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Do you have public liability insurance?
Yes. Mastic Doctor is fully insured, public liability included.
How do I request a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photos and a postcode.
Which sealant will you use?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Can you fit around our working hours?
We’re in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
What happens if it’s left?
A failed joint lets in water and dirt, whatever colour it is. Behind the bead, moisture can damage substrates and finishes. In a tenement or shared city building, water from a failed joint can reach other owners’ property, which makes early repair simpler for everyone. Acting early avoids disputes and bigger repairs.
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote.
Why choose Mastic Doctor in Trinity
- One phone line for London, the South East and Scotland
- Clear, fixed quotes
- CHAS accredited
- 12 months’ guarantee on every job
Looking after the joints
Problems stay small when the joints are checked regularly. In particular:
- Look at the cured colour before the full run
- Don’t let trades patch coloured joints with a random sealant
- Keep the area clear while the sealant cures
- Settle the colour with the designer at the start
Expect some change in appearance over the years. That is normal for exposed sealant, and resealing restores the look when the time comes.
Put the sealant colour into the specification or finishes schedule. Late decisions lead to substitutes and mismatches, so agree it with the designer at the start.