Coloured and colour-matched sealant in Temple, Windsor and Maidenhead
Our CSCS-carded applicators take on coloured and colour-matched sealant for visible joints in Temple. Send photos or drawings for a fixed quote.
- Sealant that no longer suits recoated frames
- Untidy coloured beads with ragged edges
- A bead that fights the cladding or frame colour
Need coloured sealant in Temple?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle coloured sealant in Temple
Coloured sealant work ranges from a new shop fit to replacing failed joints on an existing building on sites across Windsor and Maidenhead. On resealing, matching the existing colour is often as important as the seal itself. We work on powder-coated and anodised frames, cladding panels and office fit-out finishes, and the failures we are asked to look at most are previous reseals that don’t match the original and dirty, discoloured joints in public areas. Whoever orders the work in Temple, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
Work in smaller places such as Temple tends to come one building at a time: a pub kitchen, a hall, a small office. We will want a full list and photos first, so the right products come on the day and nothing waits for a second trip.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Place
- Temple (SL7)
- Wider area
- Windsor and Maidenhead
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Working on commercial sites near Temple
The 3 miles around Temple take in at least three named trading estates, business parks or retail parks. Sites like these see regular refits, with shopfronts, offices and staff areas to seal, often in a colour the occupier specifies. Temple has plenty of hotels close by, all within 2 miles. A hotel refurbishment is full of joints that guests will see, and a matched colour keeps them discreet, with rooms done in turn while the rest stay let.
Occupiers with premises at both Rashleighs Business Centre and Globe Business Park could have the sealant at each handled under one quote. Shops and cafés around stations like Marlow station, 1.6 miles north-east of Temple, trade from early, so work is timed around them. In hotels such as Hurley House Hotel (1.2 miles south of Temple), refurbishments normally mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes.
Temple is about 2 miles south of Marlow, in Windsor and Maidenhead. Across the SL7 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Our Windsor and Maidenhead coverage takes in 60 places. For work in that direction, see our Reading page (11 miles or so).
We cover the SL7 postcode districts for colour-matched joints. Among the streets we cover are Temple Lane, Bradenham Lane and Temple Mill Island. Close to Temple, our area also takes in Bisham (1 mile north-east), Marlow (2 miles north), Stubbings (2 miles south), Cookham Dean (2 miles east) and Burchett's Green (2 miles south). A short drive away, we cover Maidenhead (3 miles south-east), Windsor (8 miles south-east), Boyn Hill (4 miles south-east), Cookham (3 miles east), Dedworth (8 miles south-east) and Broomhall (13 miles south-east).
Local landmarks in Temple
Recent enquiries here include premises near Sir William Borlase's Grammar School and The Bull Inn, among other places. Temple’s nearest station is Marlow station, about 1.6 miles north-east of the centre. A little further out are Marlow Community Hospital (1.7 miles north-east) and Marlow Museum (1.2 miles north-east). Not far away are Weycock Hill and Carpenter's Wood.
Honest limits
We check first that sealant really is the fix. It won’t put right:
- A colour that never alters with age
- Custom-mixed sealant colours
- Overpainting a joint that needs a non-paintable product
If you are not sure, just call the office on 01277 525 020 or send photos by email and we’ll give you a straight answer before you book.
Surfaces we seal
- Office fit-out finishes
- Natural stone and brick
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
- Cladding panels
- Shop-fit joinery and counters
Looking after the joints
Cleaning and maintenance staff play a part too. Pass these on to them:
- Note which sealant colour was used where
- Approve a sample bead on high-profile areas
- Ask contractors to check the colour before resealing
- Clean coloured joints with mild products
Clean coloured joints with mild, non-abrasive products. Strong solvents and abrasive pads can dull or mark the surface over time.
Settle the colour early in the project. Late decisions lead to substitutes and mismatches.
Our process
Diagnose, treat, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Jobs in and around smaller places like Temple are usually planned as a single visit, so photos and measurements up front really help. That way the right products come on the day.
- Photos or drawings show us the finishes and joints.
- We send the closest colours from the product’s range.
- The programme and access are agreed, including any phasing.
- Joints are prepared, primed where specified and backed.
- The agreed colour is installed and tooled neatly.
Getting the site ready
- Move anything stored against the joints
- Have the specification and drawings to hand
- Tell staff and tenants when we’ll be in
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.
Advice
For managing agents and facilities managers
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Quoting for work in Temple
What shapes the price:
- How much existing material needs removing
- Backing rod, priming and other preparation
- Quantities, in metres or numbers
- Induction, permit and paperwork requirements
A quote for colour-matched joints depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.
Details that help us quote
To price the job accurately, we need to understand the site. Useful things to include:
- Rough lengths or quantities, or drawings if you have them
- What the building is and how it’s used
- Photos of the joints, close up and from further back
- Any specification or named product
To get a fixed quote, ring 01277 525 020 or email us. Our quote form is another easy route.
Surface by surface
Shop-fit and joinery finishes
In shops, joints are at eye level and inspected by clients. Clean masking and neat tooling matter as much as colour.
Hotel interiors
In hotels, sealant shows in rooms, bathrooms and front-of-house. Sanitary silicone comes in colours too, including shades for tiled and stone bathrooms.
Your questions answered
Does your area include sites such as Rashleighs Business Centre, near Temple?
Yes. Our area takes in Temple and its surroundings, with estates and business parks such as Rashleighs Business Centre included. Photos and a short description are enough for a first look.
Is Temple too far out for you?
No. Places such as Temple are covered as much as the big towns. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
Can you work to a RAL reference?
Yes. Give us the RAL reference and we will check it against the product’s range. We will tell you which colour is closest at quote stage.
Will you come and look before quoting?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit before quoting.
How much does the work cost?
We don’t publish prices, because every site is different. With photographs or drawings, we can give you a fixed quote.
Do you work on hotel and retail fit-outs?
Yes. Shop fits, hotels and office fit-outs are a regular part of our work. Our area takes in Greater London, the South East and Scotland.