The Mastic Doctor team standing beside their branded vans outside an office building
Brighton and Hove · England

Coloured and colour-matched sealant in Roedean, Brighton and Hove

Planning work on a colour-matched joint in Roedean? We look at it, seal it with the right product and hand it over with a 12-month guarantee.

  • Discoloured joints on a visible elevation
  • A run of joints in mismatched shades
  • Smeared sealant on stone or joinery
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
Covering the South East & Scotland
CHAS accredited
Fully insured: £5m PL

Coloured sealant near Roedean

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Commercial premises in Roedean

Roedean sits close to the coast, within about 1 mile. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. Where a frontage needs a particular colour, the product still has to suit that exposure. Rainfall across the South East, Roedean included, is lower than in many parts of the UK. Drier doesn’t mean dry every day, so frontage work still has some give in the dates.

Units at places like Pavilion Retail Park, 2.1 miles to the north-west of Roedean, are refitted as brands change, and the joints have to suit each new scheme. Premises within reach of Brighton station, 2.2 miles to the north-west of Roedean, often have busy frontages where joints are seen by everyone passing.

Roedean is about 2 miles east of Carlton Hill, in Brighton and Hove. We cover commercial sites throughout Roedean. Our Brighton and Hove coverage takes in 29 places, large and small.

Business premises anywhere in BN2 are within our area for colour-matched joints. Buildings on Peel Road, Cliff Road and Henley Road are within our area. If your building is just outside Roedean, we cover Ovingdean (1 mile east), Rottingdean (1 mile east), Saltdean (3 miles east), East Saltdean (3 miles east) and Falmer (3 miles north). Bigger towns within reach include Brighton and Hove (4 miles west), Hove (4 miles west), Brunswick (3 miles west), Seven Dials (3 miles north-west), Portslade (6 miles west) and Hollingdean (3 miles north-west).

Around Roedean

Around Roedean, our work takes us to commercial buildings near St Mary's Hall, Whitehawk Hill and Longhill High School. The nearest railway station is Brighton station, about 2.2 miles north-west of the centre. Well-known places in the area include French Convalescent Home (0.5 miles west) and Churchill Square (2.3 miles west). Not far away are Whitehawk Hill and Newmarket Hill.

Map of Roedean © OpenStreetMap contributors

How we handle coloured sealant in Roedean

Shop fits, hotels and offices are where colour-matched sealant earns its place. A mismatched bead can make good joinery look unfinished, even when the seal is sound. The aim is a colour from the product’s range that disappears into the surface. If you’re dealing with coloured joints that have cracked with movement and fit-outs with a sealant colour in the specification, we can put it right, on powder-coated and anodised frames, office fit-out finishes and cladding panels alike. One point of contact handles commercial sealant work in Roedean from the first photos to the final walk-round, whether it’s one building or several.

Business units in the countryside around places like Roedean are often converted barns, stables or farmyards. Old masonry beside new aluminium, timber and plasterboard gives plenty of joints between materials that move differently.

What our 12-month guarantee covers is the way we did the job: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.

Location
Roedean (BN2)
Region
Brighton and Hove
Cover
A 12-month guarantee
Price
Quoted before any work starts
Telephone
01277 525 020
Updated
3 November 2026
Mastic Doctor team members lined up next to their branded vans outside an office building

After the work

A few simple habits keep the new joints working:

  • Clean coloured joints with mild products
  • Keep the area clear while the sealant cures
  • Record the product and colour reference on the building file
  • Use one colour standard across multi-site work

Include coloured sealant in planned building checks. Look for splits, lifting edges and staining.

Put the sealant colour into the specification or finishes schedule. Late decisions lead to substitutes and mismatches.

General trades versus a specialist

For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.

For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.

How the job changes by surface

Paintable sealants

Where no colour in the range is close, a paintable hybrid or PU sealant can sometimes be painted to match. That only works where the joint and specification allow it, as paint can crack on a moving joint.

Cladding panels

Multi-coloured cladding needs a joint colour that works across it. A neutral tone from the range often works best, and a sample settles it.

Commercial clients in Roedean

Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.

If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.

When to call us in Roedean

Mould and staining discolour coloured joints in some areas. Mould that has rooted into a bead rarely cleans out.

Any of the following is a good reason to get the joints checked over:

  • Standard-colour sealant spoiling a high-end finish
  • Weathered sealant that no longer matches
  • Coloured joints that have cracked with movement
  • Smeared sealant on stone or joinery

If you have premises on more than one site, say at Bell Tower Industrial Estate and Freshfield Industrial Estate, one contractor and one quote can cover both.

Questions to ask before you book

  • Whether primer will be used where the manufacturer specifies it
  • The named product and why it was chosen
  • How they’ll work around occupants
  • Are they CHAS accredited or on Constructionline?

How to choose a sealant contractor

Questions about Roedean

Is Roedean too far out for you?

Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.

Must a hotel around Roedean close while you work?

Almost never. The work is phased so most rooms stay available. The plan is built around your bookings.

Do you match sealant to RAL colours?

Yes. Give us the RAL reference and we’ll check it against the product’s range. You’ll see the nearest options at quote stage.

Which sealant will you use?

The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.

How many days will you need on site?

We plan the time on site around your programme and access. You will have an expected duration with the quote.

Can the building stay open while you work?

Yes, as long as we plan it. Tell us your site hours and access windows and we will plan around them.

What hours do you work?

We are in the office from 8am until 5pm, Monday to Friday. Tell us your site hours and access windows and the work will be fitted around them.

Our process

Tell us your site hours and access windows and we will plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Smaller jobs around Roedean can be grouped with others nearby. You’ll have a fixed quote before work starts.

  1. The sealant type is chosen for the joint first, then the colour.
  2. We compare your RAL reference or sample with the colours made for that sealant.
  3. A short trial length can be approved before the full run on visible work.
  4. We remove the existing bead, clean the faces and set the depth.
  5. We apply the agreed colour and tool it neatly, with masking where the finish needs it.

Preparing the site

  • Let us know about inductions and permits
  • Confirm the product named in the specification
  • For older buildings, check the asbestos register before work

Ask for a quote

Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, call the office on 01277 525 020 or use the quote form.

Ask for a quote

Read more

Accreditations

Trusted. Accredited. Insured.