Coloured Sealant contractors in Reay
We carry out coloured and colour-matched sealant for visible joints in Reay and the surrounding area. Send photographs or drawings for a fixed quote.
- Marked sealant in hotel bathrooms
- A run of joints in mismatched shades
- Sealant that no longer suits recoated frames
Coloured sealant in Reay
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Coloured sealant in Reay, done properly
A coloured bead has to perform like any other sealant. Each joint is cleaned, backed to depth and tooled firmly onto both faces, with no shortcuts because it’s decorative. Clean masking and steady tooling give the sharp lines colour work needs. Most enquiries involve old colour-matched joints lifting at the edges and sealant that no longer suits recoated frames, on powder-coated and anodised frames, office fit-out finishes and cladding panels. Searching for sealant specialists in Reay? We’ve been sealing commercial buildings since 2005, with CSCS-carded applicators.
Around smaller places such as Reay, the commercial buildings tend to be hospitality, local shops, schools, health centres and converted rural buildings. Their kitchens, washrooms and window perimeters all need joints that keep water out.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Where
- Reay (KW14)
- Wider area
- Highland
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Frontages, fit-outs and joints in Reay
With the shore within about 2 miles, Reay counts as a coastal location. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. A matched colour is only half the brief on an exposed frontage. The east of Scotland, where Reay is, gets less rain than the west. Cold, frosty mornings and condensation on steel and glass can still delay outside work. Outside work is booked with that in mind
For premises around Reay where the joint is seen, colour options for the product are confirmed with the quote. A lasting commercial joint around Reay begins with the old bead fully out and the faces clean and dry.
Reay is about 10 miles west of Thurso, in Highland. Reay sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Reay is one of 256 places we cover in Highland for colour-matched joints.
Work on colour-matched joints is covered throughout KW14, whatever the building. We cover commercial and managed buildings on The Terrace, The Avenue and Beinn Ratha Court and the roads nearby. We also cover Melvich (5 miles west), Portskerra (5 miles west), Forss (6 miles north-east), Westfield (6 miles east) and Janetstown (8 miles east) for colour-matched joints. For island and remote sites, we plan travel and materials carefully, so include the location in your enquiry.
Local landmarks in Reay
Other landmarks nearby include Dounreay Castle (2.1 miles north-east). The countryside around Reay includes Caol-Loch.
On site: what to expect
We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. Where we can, we combine work around Reay with other jobs nearby. Tell us how flexible your dates are.
- Photos or drawings show us the finishes and joints.
- We send the closest colours from the product’s range.
- The programme and access are agreed, including any phasing.
- Joints are prepared, primed where specified and backed.
- The agreed colour is installed and tooled neatly.
Getting the site ready
- Tell us which areas need to stay in use
- Confirm the product named in the specification
- Let building users know which areas are affected
Get a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, phone 01277 525 020 or send photos by email.
Read more
How the job changes by surface
Powder-coated and anodised frames
Anodised and metallic frames rarely have an identical sealant colour. We will suggest the nearest standard colours.
Cladding panels
Multi-coloured cladding needs a joint colour that works across it. Sometimes a mid-tone suits better than matching one panel, and a sample settles it.
What happens if it’s left?
Standard white or grey sealant is cheaper to stock, but it doesn’t always suit the finish. On visible work, the small extra effort of a colour from the product’s range pays off in how the finished space looks. For buildings near Reay, dealing with all the failing joints at once saves return trips. Send photographs and we’ll quote for everything together.
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What you get with us
- Colour agreed before work starts
- Clear, fixed quotes
- Constructionline member for supplier checks
- CHAS accredited contractor
Take a look at our cost guide and our accreditations.
Also near Reay
Also in Reay
Common questions from Reay clients
Can the sealant on our Reay premises match the finishes?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. The quote lists the colours the product is made in.
Does the sea air around Reay change the choice of sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We check the specified product suits the exposure and pay close attention to preparation.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Does the weather affect the work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
Do you guarantee your work?
Yes. Workmanship is guaranteed for 12 months on every job.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
When it isn’t the sealant
A proper diagnosis includes knowing what sealant can’t do. We will tell you if the real problem is one of these:
- Exact bespoke colour matches beyond the product’s range
- Cleaning or repairing the surrounding finishes
- A colour that never alters with age
If you are not sure, just ring 01277 525 020 or email drawings and photos and we’ll give you a straight answer before you book.
What we seal
- Cladding panels
- Natural stone and brick
- Hotel bathrooms and public areas
- Office fit-out finishes
- Shop-fit joinery and counters
- Powder-coated and anodised frames
Cost factors for colour-matched joints
Sealant work doesn’t have a standard rate, because every site is different. What we look at:
- The product specified
- Working within restricted access windows
- Removal of failed or old sealant
- How accessible the joints are
Pricing colour-matched joints depends on quantities, condition and access. Call for a quote.
Details that help us quote
However big the job, these details speed things up:
- Whether the building will be occupied during the work
- The product your specification calls for
- How the joints are reached, and at what height
- Any dates the work must fit around
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to phone 01277 525 020 or email the details over with what you know.
Doing it in-house
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Redoing a failed joint usually costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.