The Mastic Doctor team standing beside their branded vans outside an office building
Orkney Islands · Scotland

Coloured Sealant in Pierowall

Looking for coloured sealant in Pierowall? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.

  • Untidy coloured beads with ragged edges
  • White or grey sealant that clashes with the finish
  • Marked sealant in hotel bathrooms
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Signed off, with 12 months’ guarantee.
South East, London & Scotland
CHAS & Constructionline
£5m PL insurance

Coloured sealant in Pierowall

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Coloured sealant in Pierowall

Where finishes matter, a white or grey bead in the wrong place stands out. We install coloured and colour-matched sealant so joints sit quietly against cladding, stone, brick, frames and shop-fit finishes, on commercial projects around Pierowall. The right product for the joint always comes first, then the colour. We work on powder-coated and anodised frames, cladding panels and office fit-out finishes, and the failures we’re asked to look at most are shop fits that need consistent sealant colours across sites and a bead that fights the cladding or frame colour. For commercial sealant work in Pierowall, you deal with one contact from quote to sign-off, whether it’s one building or several.

For a job around Pierowall, the Scottish weather is part of the planning: sealant needs a dry joint and the right temperature, so external work has a weather window built in. Internal joints can be done whatever the day brings.

Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.

Place
Pierowall (KW17)
Wider area
Orkney Islands
Guarantee
12 months on every job
Price
Quoted before any work starts
Telephone
01277 525 020
Updated
3 November 2026
The Mastic Doctor team beside their liveried vans in front of an office building

What sets the cost

Before we quote, we look at:

  • Whether old sealant has to be cut out first
  • Quantities, in metres or numbers
  • Backing rod, priming and other preparation
  • Whether the work must be split into stages

Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.

What we need to price the job

We can often quote from photographs and a few details. It helps to include:

  • Any dates the work must fit around
  • How the joints are reached, and at what height
  • The asbestos register, for older buildings
  • Drawings or a marked-up plan, if available

If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. For smaller jobs, photos and a description will do.

What happens if it’s left?

A mismatched or discoloured bead is a small detail that buyers, guests and clients notice. Putting it right costs little compared with the finishes around it. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Pierowall before they leak.

No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.

Why appoint us

  • Fixed quotes based on photographs, drawings or a visit
  • Colour options checked against the specified product
  • Over 20 years of commercial sealing
  • 12 months’ guarantee on every job

See our cost guide and our accreditations and insurance.

For managing agents and facilities managers

Hotels, schools, healthcare sites, offices and retail units come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.

FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.

Common questions from Pierowall clients

Does a hotel in Pierowall need to shut while its sealant is renewed?

Rarely. Rooms or floors are done in turn, so the rest of the hotel keeps trading. The plan is built around your bookings.

Does a coastal location like Pierowall affect which sealant is used?

It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We check the specified product suits the exposure and pay close attention to preparation.

Do you work to architects’ specifications?

Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it, flagging anything that needs clarifying.

Does the weather affect the work?

It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.

How long does a typical visit take?

The duration is planned around your programme and the access we’re given. You will have an expected duration with the quote.

What’s the quickest route to a quote?

It works in four steps: send details, get a quote, we seal, guaranteed. The first step only needs photographs and a postcode.

Will you just go over the old sealant?

No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.

From enquiry to sign-off

Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For work around Pierowall, we aim for one trip, so photos, sizes and a full list matter. External joints need a dry spell as well.

  1. We confirm the joint type and the product it needs.
  2. We compare the target colour with the colours available.
  3. You approve the colour, on site if it’s critical.
  4. The existing bead comes out, then faces are cleaned and backed.
  5. Edges are masked and the coloured sealant applied and tooled.
  6. We remove the masking and walk the finished joints with you.

What we need from you

  • Move anything stored against the joints
  • Confirm the product named in the specification
  • Arrange parking or a loading space

Quotes

Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, call the office on 01277 525 020 or use the quote form.

Get a quick quote

Advice

Maintenance after handover

Every sealant joint needs some looking after, and how long they last depends on how they’re treated. Our advice:

  • Check a trial length in real light
  • Don’t let trades patch coloured joints with a random sealant
  • Avoid piecemeal repairs on coloured joints
  • Protect fresh coloured sealant from dust and handling

Don’t let anyone patch a coloured joint with whatever sealant is to hand. A mismatched repair stands out.

Use one product and colour reference across a building or brand. It keeps repairs and new sites consistent.

Coloured sealant around Pierowall: how the place shapes the job

Pierowall sits close to the coast, within about 1 mile. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. A matched colour is only half the brief on an exposed frontage. The area within 2 miles of Pierowall holds several hotels. Hotel refurbishments are where a matched sealant colour earns its place: bathroom, bar and reception joints have to sit with the finishes, with rooms done in turn while the rest stay let.

Colour matters on frontages and fit-outs, so the quote confirms which colours the chosen product comes in. For any commercial premises in Pierowall, a lasting joint depends on full removal of the old sealant and clean, dry faces.

Pierowall is about 24 miles north of Kirkwall, in the Orkney Islands. Our applicators travel to Pierowall for work on colour-matched joints. We work across 51 places in the Orkney Islands.

We take on colour-matched joints across the KW17 postcode area, whatever the building. For a building on Gillpier Road, Howanbrek and Hirstquoy or nearby, send details and we will quote for colour-matched joints. Just outside Pierowall, we also work in Rackwick (1 mile north), Brinian (13 miles south), Broughtown (14 miles east), Evie (15 miles south) and Lady (16 miles east). Among the larger centres in the Orkney Islands is Pierowall, and its commercial and public buildings are all within our area. For island and remote sites, travel and materials need planning ahead.

Around Pierowall

A little further out are Noltland Castle (1 mile west). For a walk, there’s North Hill RSPB reserve and Loch Saintear.

Map of Pierowall © OpenStreetMap contributors

What the job involves on each surface

Powder-coated and anodised frames

Anodised and metallic frames rarely have an identical sealant colour. We show you the closest options in the product’s range.

Paintable sealants

Some joints are better sealed with a paintable product and decorated. That only works where the joint and specification allow it because paint may crack where the joint moves.

Accreditations

Trusted. Accredited. Insured.