New Aberdour coloured sealant
Coloured sealant in New Aberdour, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- A run of joints in mismatched shades
- Old sealant that has yellowed, darkened or faded
- Fit-outs with a sealant colour in the specification
Coloured sealant in New Aberdour
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Maintenance after handover
Cleaning and maintenance staff play a part too. Share these points with them:
- Keep harsh solvents away from visible joints
- Note which sealant colour was used where
- Keep the area clear while the sealant cures
- Avoid piecemeal repairs on coloured joints
Expect some change in appearance over the years. That is normal for exposed sealant, and resealing restores the look when the time comes.
Approve a sample where colour really matters. Seeing the cured colour in place avoids surprises.
About our coloured sealant in New Aberdour
Window, door and shopfront frames in RAL finishes often need a sealant to suit. The frame colour is checked against the sealant’s standard range, and you approve the choice. If the range has no close colour, a paintable sealant can sometimes be overpainted, where the specification allows. If you’re dealing with weathered sealant that no longer matches and a bead that fights the cladding or frame colour, we can help, whatever the surface. Most enquiries from New Aberdour start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
In smaller Scottish places like New Aberdour, commercial buildings are often hotels, pubs, shops, schools, surgeries and farm or estate buildings put to new use. Their kitchens, washrooms and window perimeters all need joints that keep water out.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- New Aberdour (AB43)
- Wider area
- Aberdeenshire
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
When to bring in a specialist
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
What sealant work can’t fix
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- A colour that never alters with age
- Restoring stained stone or masonry next to old sealant
- Materials with mixed tones that defy a single match
Not sure which it is? You can ring 01277 525 020 or use the quote form and we’ll tell you honestly before you book.
Where we work in New Aberdour
- Cladding panels
- Office fit-out finishes
- Powder-coated and anodised frames
- Shop-fit joinery and counters
- Hotel bathrooms and public areas
- Natural stone and brick
Surface by surface
Powder-coated and anodised frames
Metallic and anodised finishes are hard to match exactly with sealant. We show you the closest options in the product’s range.
Brick and masonry
On brick, the sealant often matches the mortar rather than the brick face. We choose a suitable shade from the product’s range.
Quoting for work in New Aberdour
A fixed quote reflects the actual work. It takes account of:
- Site requirements such as inductions and permits
- Any access equipment needed
- Travel to remote or island sites
- Removal of failed or old sealant
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Before you send an enquiry
The more we know, the firmer the quote. Helpful details to send:
- Whether the building will be occupied during the work
- Your programme or deadline
- Access details, including height
- Any specification or named product
For a fixed quote, phone 01277 525 020 or send photos by email. You can also send details through our quote form.
Commercial premises in New Aberdour
New Aberdour sits close to the coast, within about 2 miles. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. A matched colour is only half the brief on an exposed frontage. New Aberdour is on Scotland’s drier eastern side. Cold, frosty mornings and condensation on steel and glass can still delay outside work. In winter, outside joints are timed for when surfaces are dry and within the product’s range
A lasting commercial joint around New Aberdour begins with the old bead fully out and the faces clean and dry. For a hotel such as Commercial Hotel, less than half a mile to the south-west of New Aberdour, the colour of a joint at the bar or the bath matters to the look of the room.
New Aberdour is about 7 miles west of Fraserburgh, in Aberdeenshire. Our applicators travel to New Aberdour for work on colour-matched joints, handled exactly as we handle every other area. Our Aberdeenshire coverage takes in 179 places. Sites around Aberdeen have their own page, about 35 miles away.
Work on colour-matched joints is covered throughout AB43, for business premises of every kind. We cover commercial and managed buildings on High Street, St Drostans Lane and Elphin Street and the roads nearby. If your building is just outside New Aberdour, we cover Rosehearty (4 miles north-east), New Pitsligo (5 miles south), Memsie (5 miles east), Pittulie (5 miles north-east) and Gardenstown (5 miles west). Further afield, our area takes in Fraserburgh (7 miles east), Turriff (13 miles south-west), Banff (12 miles west), Macduff (11 miles west), Mintlaw (12 miles south-east) and Broadsea (7 miles east).
Landmarks near New Aberdour
Other landmarks nearby include Dundarg Castle (1.1 miles north-east). Open spaces near New Aberdour include Troup Head RSPB Reserve and Glasslaw Loch.
On site: what to expect
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Tell us who will meet us and how to get in at your building near New Aberdour. That goes into the plan alongside the quote.
- The sealant type is chosen for the joint first, then the colour.
- Colour references, samples or photographs of the finish are checked against the product’s range.
- Where colour is critical, a sample bead can be agreed in a discreet spot.
- We take out the existing bead, clean the joints and fit backing.
- The coloured sealant is applied and tooled with clean, masked edges.
What we need from you
- Move anything stored against the joints
- Have the specification and drawings to hand
- Tell us what induction or permit system the site runs
Request a quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or speak to us on 01277 525 020 or email drawings and photos to discuss it first.
Advice
Towns and villages near New Aberdour
More services for New Aberdour
Common questions from New Aberdour clients
Is New Aberdour too small for you to travel to?
Not at all. New Aberdour is within our area. Our area covers all of Scotland, cities, towns and islands alike. We plan jobs in smaller places so return trips are kept to a minimum.
Our building in New Aberdour is near the coast: does that change the sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We check the specified product suits the exposure and pay close attention to preparation.
Can you work while the building is occupied?
In most cases, yes. We phase the work so most of the building stays in use, with each area protected and signed.
Will the sealant be an exact match to our finish?
No. An exact bespoke match isn’t something we can promise. We will show you the closest colours in the specified product’s range for your approval.
Do you match sealant to RAL colours?
Yes. We compare the RAL reference with the colours made for the specified sealant. You’ll see the nearest options at quote stage.
What about RAMS and site documents?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
Can weather delay the job?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.