Coloured Sealant contractors in Forfar
Coloured and colour-matched sealant for visible joints in Forfar and across Angus. CHAS accredited and fully insured, with a 12-month guarantee.
- A run of joints in mismatched shades
- Weathered sealant that no longer matches
- Marked sealant in hotel bathrooms
Coloured sealant near Forfar
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Coloured sealant for commercial buildings in Forfar
Colour-matched joints are often among the last items before handover. We work around other trades and protect adjacent finishes, and we leave the area clean. Our workmanship carries a 12-month guarantee. The enquiries we see most involve colour changes after a rebrand or refit and standard-colour sealant spoiling a high-end finish, across cladding panels, hotel bathrooms and public areas and powder-coated and anodised frames. A specialist sealant contractor works differently from a general builder: in Forfar, that means joint design, primers and backing rod as standard.
In Forfar, as across Scotland, outside joints are planned around the weather: faces must be dry and within the temperature limits on the product data sheet, so we keep a little slack in the programme. Internal joints in washrooms, kitchens and fit-outs aren’t affected and can go ahead on wet days.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, speak to us on 01277 525 020 or email the details over and we’ll come back to it.
- Where
- Forfar (DD8)
- Wider area
- Angus
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Doing it in-house
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
On site: what to expect
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work normally takes a few hours or a phased programme, depending on joint lengths and how many colours are involved, and our waste is bagged and taken away as we go. In a Scottish town such as Forfar, outside work is planned around the weather and inside work around the occupants. Photos or drawings let us give a fixed quote and a realistic plan.
- First we agree which sealant type the joint needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- The nearest colour is agreed, with a sample bead where needed.
- The existing bead comes out, then faces are cleaned and backed.
- We mask, seal and tool to a clean line.
- We remove the masking and walk the finished joints with you.
What we need from you
- Make sure the joints can be reached
- Flag any permit to work we will need
- Warn occupants and staff about the work
Ask for a quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Read more
What sets the cost
Your fixed quote is built from the real scope. It allows for:
- Travel to remote or island sites
- Whether old sealant has to be cut out first
- Quantities, in metres or numbers
- Site requirements such as inductions and permits
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
Details that help us quote
Diagnosis starts before we arrive. Let us know:
- How the joints are reached, and at what height
- The product your specification calls for
- Rough lengths or quantities, or drawings if you have them
- The site address and postcode
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. Smaller jobs need nothing more than photos and a few notes.
Forfar: questions and answers
Do you cover business parks and estates near Forfar, such as Forfar Retail Park?
Yes. We cover Forfar and the area around it, including industrial estates, business parks and retail parks such as Forfar Retail Park. Photos and a short description are enough for a first look.
Do hotels near Forfar have to close for sealant work?
Almost never. The work is phased so most rooms stay available. Tell us your quiet periods and access windows and we will plan around them.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
Will sunlight affect the sealant colour?
It can, to a degree. How much depends on the product, the colour and the exposure, and we can’t promise a colour that never alters.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so we will ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Do you take on colour-matched sealant for shop fits and multi-site roll-outs?
Yes. We work with shop fitters, hotel groups and office fit-out contractors. Our area takes in Greater London, the South East and Scotland, so one colour reference can carry across every site.
Nearby places to Forfar
What else we do in Forfar
Coloured sealant in Forfar: the local picture
A 2-mile radius around Forfar takes in several hotels. Hotel refurbishments are where a matched sealant colour earns its place: bathroom, bar and reception joints have to sit with the finishes; work is planned so the hotel keeps trading. The east of Scotland, where Forfar is, gets less rain than the west. Frost and condensation on winter mornings can still hold up external sealing. We plan external frontages and frames around that
Sites a few miles apart, such as Forfar Retail Park and The Old Mart Business Park, can share one programme and one point of contact. Refits at hotels like Royal Hotel (less than half a mile west of Forfar) bring joints at vanity tops, bars and reception desks that guests see every day. If you look after units at a retail site such as Forfar Retail Park, less than half a mile west of Forfar, shopfront perimeters and shop-fit joints are where a matched colour shows.
Forfar is about 12 miles north of Dundee, in Angus. Anywhere in DD8, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Forfar is one of 65 places we cover in Angus. We also cover Dundee, some 12 miles away.
Work on colour-matched joints is covered throughout DD8. Among the streets we cover are West High Street, East High Street and Market Place, and sites on any of them can send details for a fixed quote. Access to Forfar is via the A94 and A926, so getting applicators and materials to site is simple. We also cover Lunanhead (1 mile north-east), Kingsmuir (2 miles south-east), Padanaram (2 miles west), Lownie Moor (2 miles south-east) and Hillend (2 miles south-east). Bigger towns within reach include Arbroath (13 miles south-east), Monifieth (11 miles south), Carnoustie (12 miles south-east), Kirriemuir (5 miles north-west), Brechin (11 miles north-east) and Hunter's Town (12 miles south-east). Forfar is one of the busier places in Angus, and its commercial and public buildings are all within our area.
Landmarks near Forfar
Recent enquiries here include premises near 23 Osnaburg Street pub and Guthrie Park. Nearby you will also find Forfar Castle (under half a mile north-west) and Meffan Museum and Art Gallery (less than half a mile south-west). The countryside around Forfar includes Loch of Forfar.
Why deal with it now?
Resealing a full run gives a consistent colour. Piecemeal repairs over several years tend to drift in colour, and the patchwork effect grows. If one joint has failed on a building in Forfar, its neighbours, laid at the same time, may not be far off. Doing them together saves return visits.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What you get with us
- Matching to RAL references, product permitting
- A fixed quote before work starts
- Standard and matched colours in many product ranges
- CHAS accredited contractor
Take a look at our cost guide or our accreditations.
When something else is needed
Some faults sit outside our scope, and we say so rather than covering them up:
- Overpainting a joint that needs a non-paintable product
- Finishes that change colour from one area to another
- Custom-mixed sealant colours
Not sure which it is? You can call 01277 525 020 or email a schedule or drawings and we’ll tell you honestly before you book.
Surfaces we seal
- Office fit-out finishes
- Natural stone and brick
- Powder-coated and anodised frames
- Cladding panels
- Shop-fit joinery and counters
- Hotel bathrooms and public areas
Building owners, agents and FMs in Forfar
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.