Lonemore coloured sealant
Planning work on a colour-matched joint in Lonemore? We assess it, carry out the work and guarantee our workmanship for 12 months.
- White or grey sealant that clashes with the finish
- Dirty, discoloured joints in public areas
- Old sealant that has yellowed, darkened or faded
Coloured sealant near Lonemore
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle coloured sealant in Lonemore
We can agree a short trial length before the full run. Cured sealant may look a shade different from the wet bead, and lighting changes it again, so approving a sample on site is worth doing. Let us know who signs off colour, and we’ll fit the sample into the programme. We work on cladding panels, natural stone and brick and office fit-out finishes, and what we are called in for most is marked sealant in hotel bathrooms and shop fits that need consistent sealant colours across sites. One point of contact handles commercial sealant work in Lonemore from the first photographs to the final walk-round, for single jobs and planned programmes alike.
In smaller Scottish places like Lonemore, commercial buildings are often hotels, pubs, shops, schools, surgeries and farm or estate buildings put to new use. Their kitchens, washrooms and window perimeters all need joints that keep water out.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Lonemore (IV21)
- Wider area
- Highland
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Work for main contractors and building owners
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Whether you are a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
Surface by surface
Paintable sealants
Paintable sealants suit internal, low-movement joints best. If the joint needs a product that can’t be painted, we say so.
Shop-fit and joinery finishes
Counters, display units and wall linings are seen close up. Clean masking and neat tooling matter as much as colour.
What else we do in Lonemore
Working on commercial sites near Lonemore
Lonemore is within about 1 mile of the coast. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. A matched colour is only half the brief on an exposed frontage. The area within 2 miles of Lonemore holds a number of hotels. Hotel refurbishments are where a matched sealant colour earns its place: bathroom, bar and reception joints have to sit with the finishes; work is planned so the hotel keeps trading.
In hotels such as Millcroft Hotel (0.6 miles east of Lonemore), refurbishments normally mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes. For any commercial premises in Lonemore, a lasting joint depends on full removal of the old sealant and clean, dry faces.
Lonemore is in Highland. Across the IV21 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Our Highland coverage takes in 256 places, large and small.
Postcode districts covered here: IV21. Sites close to Lonemore are covered too, including Gairloch (1 mile east), Badachro (2 miles south), Poolewe (5 miles north-east), Inverasdale (6 miles north) and Àird (9 miles north-east). Where a site is remote or on an island, we plan travel and materials carefully.
Near you in Lonemore
We work on buildings around Gairloch School. Well-known places in the area include Gairloch Museum (1 mile east). Not far away are Linne a' Mhuilinn and Cnoc Dubh.
On site: what to expect
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work normally takes a day for a modest shop fit, and longer for a full building or several floors, and we clear our waste as we work. Jobs near Lonemore are often grouped with others in the same area. Tell us how flexible your dates are.
- First we agree which sealant type the joint needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- The nearest colour is agreed, with a sample bead where needed.
- We cut out the existing bead, clean and set the depth.
- We mask, seal and tool to a clean line.
- Masking comes off and the work is checked with you.
Before we start on site
- Send any specification or drawings in advance
- Warn occupants and staff about the work
- Share your working hours and any access restrictions
Ask for a quote
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, ring 01277 525 020 or use the quote form.
Related advice
Should maintenance staff do it?
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Your questions answered
Will our hotel in Lonemore need to close for the work?
In most cases no closure is needed: we work room by room or floor by floor. Housekeeping and our team agree each day’s rooms.
Is Lonemore too small for you to travel to?
Not at all: smaller places are covered as well as towns. We cover the whole of Scotland. Where we can, we group nearby jobs to make the most of each trip.
Does the weather affect the work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
Will you come and look before quoting?
It depends on the job. Straightforward work can often be priced from photos and measurements, while larger or less clear jobs get a site visit first.
What site paperwork can you supply?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
What sealant work can’t fix
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Cleaning or repairing the surrounding finishes
- Custom-mixed sealant colours
- Materials with mixed tones that defy a single match
If you’re not sure, just call the office on 01277 525 020 or send details through our quote form and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Hotel bathrooms and public areas
- Shop-fit joinery and counters
- Cladding panels
- Office fit-out finishes
- Powder-coated and anodised frames
- Natural stone and brick
Quoting for work in Lonemore
Quotes vary with the job. Expect it to depend on:
- Which sealant the job calls for
- Travel to remote or island sites
- How much there is to seal
- Whether old sealant has to be cut out first
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote and we’ll price your job on its own details.
Sending details for a quote
Diagnosis starts before we arrive. Tell us:
- The site address and postcode
- Anything awkward about access or site hours
- Drawings or a marked-up plan, if available
- The type of building and who uses it
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.