The Mastic Doctor team standing beside their branded vans outside an office building
Highland · Scotland

Coloured and colour-matched sealant in Poolewe, Highland

Coloured and colour-matched sealant for visible joints throughout Poolewe and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.

  • White or grey sealant that clashes with the finish
  • Fit-outs with a sealant colour in the specification
  • Discoloured joints on a visible elevation
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
South East, London & Scotland
CHAS & Constructionline
Fully insured: £5m PL

Coloured sealant for Poolewe sites

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

Your questions answered

Does the sea air around Poolewe change the choice of sealant?

It can. Coastal exposure works external joints harder than inland weather. We check the specified product suits the exposure and pay close attention to preparation.

Is Poolewe off your patch?

Not at all: smaller places are covered as well as towns. Every Scottish council area is within our area. We plan jobs in smaller places so return trips are kept to a minimum.

Do you seal on top of existing sealant?

No. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.

How do you deal with asbestos in old sealant?

The duty to manage asbestos sits with the building’s dutyholder, so we will ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.

What will the job cost?

That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote.

Are your applicators CSCS-carded?

Yes. Our applicators hold CSCS cards, which many sites require.

Do you do a sample bead?

Yes. A trial length can be applied and approved before the full run. Cured sealant can look slightly different from the wet bead.

How we handle coloured sealant in Poolewe

We can agree a short trial length before the full run. Sealant can look slightly different once it has cured, and again in different light, so approving a sample on site is worth doing. Tell us who needs to approve the colour and we will plan for it. We work on hotel bathrooms and public areas, natural stone and brick and shop-fit joinery and counters, and the usual reasons a site gets in touch are previous reseals that don’t match the original and sealant that no longer suits recoated frames. One point of contact handles commercial sealant work in Poolewe from the first photographs to the final walk-round, whether it’s one building or several.

Travel to smaller places such as Poolewe is planned so the whole job is finished in one visit where possible: send photos and a complete list so the right products and colours come on the day. If neighbouring businesses have work too, the visits can be grouped.

Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.

The Mastic Doctor team beside their liveried vans in front of an office building
Where
Poolewe (IV22)
Wider area
Highland
Cover
12 months on our workmanship
Quote
Quoted before any work starts
Phone
01277 525 020
Last updated
3 November 2026

Why it’s worth doing now in Poolewe

Leaving a failed coloured joint risks more than appearance. Water through a split seal can stain or damage the surfaces next to it. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Poolewe, a repair visit takes planning, so it’s better to act early.

A quote for colour-matched joints depends on how many there are, their condition and the access, plus any specification you are working to. Call for a quote.

What you get with us

  • Commercial sealant work since 2005
  • Fixed quotes based on photographs, drawings or a visit
  • Failed material removed, not covered up
  • Our applicators hold CSCS cards

See how commercial sealant jobs are priced or our accreditations and insurance.

Doing it in-house

There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.

Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.

What we are called out for in Poolewe

Colour-matched sealant is typically requested because a standard bead has spoiled the finish: a pale bead on a dark frame, or an old seal that has discoloured. Replacing it with a suitable colour restores the intended look.

Typical triggers for a call:

  • Sealant that no longer suits recoated frames
  • A run of joints in mismatched shades
  • Weathered sealant that no longer matches
  • Standard-colour sealant spoiling a high-end finish

For any commercial premises in Poolewe, a lasting joint depends on full removal of the old sealant and clean, dry faces.

Questions to ask before you book

  • Will RAMS and insurance details be available?
  • Whether primer will be used where the manufacturer specifies it
  • How the existing material will be dealt with
  • Are they CHAS accredited or on Constructionline?

Choosing a commercial sealant contractor

How the quote is worked out

Before we quote, we look at:

  • Distance, for remote addresses
  • Access and working height
  • Backing rod, priming and other preparation
  • The total length or number of joints

The product called for affects the cost, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.

Details that help us quote

The more we know, the firmer the quote. Helpful details to send:

  • Clear photographs of the problem areas
  • Access details, including height
  • Drawings or a marked-up plan, if available
  • Your programme or deadline

Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call the office on 01277 525 020 or email us with what you know.

Our process

At the end of each section, we remove the tape, clean down and inspect every joint. If an area should be left alone while the sealant cures, we say how long and put signs out. Where we can, we combine work around Poolewe with other jobs nearby. Tell us how flexible your dates are.

  1. We confirm the joint type and the product it needs.
  2. Your RAL reference, sample or photo is checked against that product’s colours.
  3. You approve the colour, on site if it’s critical.
  4. We cut out the existing bead, clean and set the depth.
  5. Edges are masked and the coloured sealant applied and tooled.
  6. We remove the masking and walk the finished joints with you.

Getting the site ready

  • Share the asbestos register for older buildings
  • Tell staff and tenants when we will be in
  • Clear stock, furniture or equipment away from the joints

Getting a fixed quote

The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or call the office on 01277 525 020 or use the quote form to discuss it first.

Get a price

Read more

Sealant on show in Poolewe’s commercial buildings

Poolewe lies within about 1 mile of the sea. Buildings near the sea put their external joints through more driven rain, with salt air nearer the beach. We choose a product rated for the exposure, then confirm the colours available for it. The west of Scotland, where Poolewe is, gets more rain than the east. External joints are sealed on dry days, with some flexibility in the dates. Shopfronts and frames facing the prevailing weather are where failures show first

Refits at hotels like Poolewe Hotel (to the north of Poolewe) bring joints at vanity tops, bars and reception desks that guests see every day.

Poolewe is in Highland. Across the IV22 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. 256 places across Highland fall within our area, including Poolewe.

Business premises anywhere in IV22 are within our area for colour-matched joints. Streets here include Cliffton, Sydney's Way and St Maelrubha Close. Just outside Poolewe, we also work in Gairloch (4 miles south-west), Inverasdale (4 miles north-west), Lonemore (5 miles south-west), Aultbea (5 miles north) and Àird (5 miles north). For island and remote sites, we plan travel and materials carefully, so include the location in your enquiry.

Landmarks near Poolewe

The countryside around Poolewe includes Lochan Feoir.

Map of Poolewe © OpenStreetMap contributors

Surface by surface

Office fit-outs

Partition frames and joinery are often in a set colour. We choose sealant colours to suit.

Paintable sealants

Overpainting is most common on internal joints with little movement. We will tell you if a joint needs a non-paintable product.

Accreditations

Trusted. Accredited. Insured.