Highland · Scotland
Commercial sealant contractors in IV21
We cover every part of the IV21 postcode district, which takes in Gairloch, Badachro and Lonemore. Every joint is properly prepared, with a 12-month guarantee.
Sealant work in IV21
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Areas within IV21
Sealant work we offer in IV21
- Expansion and movement joint sealing
- Facade and window perimeter sealing
- Construction and new-build mastic
- Coloured and colour-matched sealant
- Fire-rated sealing and fire stopping
- Commercial washroom and wet-area sealing
- Commercial sealant contractors
- Mastic sealing for building owners and managing agents
- Industrial and floor joint sealing
- All services
Tell us what needs doing and your postcode and we’ll come back with a price: speak to us on 01277 525 020 or email drawings and photos.
Neighbouring districts
Elsewhere in Highland
All places in Highland
Every area we cover
About commercial sealant contractors in IV21
How long a joint lasts is decided before any sealant leaves the gun. Silicone has no grip on cured silicone, so the failed bead is cut out completely, then both faces are cleaned back to sound, dry material with no dust or grease on them. Where the sealant maker specifies a primer for that substrate, it goes on before the new bead, and a backing rod limits the depth to give the sealant room to work. Most enquiries involve water staining near frames, panels or ceilings and greasy, split joints in a kitchen or tea point, across window and door perimeters, washrooms and tea points and movement joints in walls and floors.
We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and we check in with your contact before moving on to each new area.
- First, details reach us through the quote form or a site visit.
- We diagnose the cause of failure and price a fixed scope.
- Work is phased around your occupiers where areas need to stay in use.
- Old sealant is cut out completely, never sealed over.
- Each joint gets a suitable sealant, laid to depth and tooled.
- A final walk-round, then the 12-month guarantee applies.
How we quote
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Why appoint us
- Colour options checked against the specified product
- Specification-led, product-correct work
- 12-month guarantee on workmanship
- Colours chosen to suit frames, cladding or finishes where possible
Request a quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. If you have questions first, give us a call on 01277 525 020 or send photos by email.
Around Gairloch
In Gairloch, that means premises near Gairloch High School and Gairloch School. Other landmarks nearby include Gairloch Museum (under half a mile south-east). Green spaces nearby include Cnoc Dubh and Linne a' Mhuilinn.
Commercial sealant contractors across IV21: the area picture
Commercial buildings across IV21 range from older premises altered many times to recent units on business parks. Each building needs the right product for its surfaces, from stone and brick to coated aluminium and laminate.
Across IV21, outside sealant work is planned around the weather, so we keep some flexibility in the dates. In the parts of IV21 near the sea, the elevations facing the weather are where sealant gives up first.
Gairloch: For any commercial premises in Gairloch, a lasting joint depends on full removal of the old sealant and clean, dry faces. In hotels such as Millcroft Hotel, less than half a mile to the west of Gairloch, refurbishments usually mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes.
General trades versus a specialist
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
After the work
Keep the joints in good shape with a few simple steps:
- Deal with small splits before they become leaks
- Respect the cure time before reopening an area
- Look at the sealant around anything that has been moved or replaced
- Ask cleaners to use a soft cloth and mild cleaner on sealant
Give fresh sealant time to cure before it’s cleaned, wetted or walked past. That time depends on the product, the temperature and the joint depth. Keeping signs or barriers up until then protects the finish.
Sealant installed at the same time usually fails in sequence. The first failures are often a warning about the rest. We can assess the lot and suggest what to do now and later.
When it isn’t the sealant
Sealant solves a lot, but not everything, and we’re upfront when that’s the case. These need a different solution:
- Broken glass or blown double-glazed units
- Leaking roofs, gutters or flat-roof membranes (those need a roofer)
- Leaks from pipework, wastes or valves (that’s plumbing)
Work for main contractors and building owners
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Leave it or put it right?
It can be tempting to hold sealant work back until the next refurbishment. For internal joints that are only cosmetic, that can make sense, but a joint letting water in now keeps doing damage until the refurb arrives. Splitting the scope into now and later is often the sensible compromise.
Questions to ask before you book
- Their approach to joint depth and backing
- How long is the guarantee, and what does it include?
- What site paperwork they can supply
- Are they CHAS accredited or on Constructionline?
Questions about IV21
Can weather delay the job?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
How is commercial sealant work priced?
Photos, drawings or a schedule of the joints are normally enough to start through the quote form on this site. If a visit is needed we will book one, and a fixed quote follows.
Is the old sealant taken out first?
Every failed bead is cut out completely. Laying new silicone on old gives it nothing to grip, and the faces are brought back to sound, dry material before resealing.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, tell us and we will confirm them with the quote.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.
How many days will you need on site?
That varies with the scale of the job, though a typical visit usually takes part of a day on a small job and longer where several buildings or phases are involved. For bigger or phased jobs, we will set out a timescale with the quote.
Do you seal on top of existing sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.