Coloured Sealant contractors in Keiss
Planning work on a colour-matched joint in Keiss? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Joints that need to match a new RAL frame colour
- Old colour-matched joints lifting at the edges
- Untidy coloured beads with ragged edges
Coloured sealant across Keiss
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle coloured sealant in Keiss
Stone, brick and cladding each bring their own colour challenge: sandstone, granite, brick and stained timber rarely have one flat colour. We choose a colour that reads well across the surface rather than chasing one spot. If you have shop fits that need consistent sealant colours across sites and a run of joints in mismatched shades, we can help, whatever the surface. Searching for sealant specialists in Keiss? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
In smaller Scottish places like Keiss, commercial buildings are often hotels, pubs, shops, schools, surgeries and farm or estate buildings put to new use. Their kitchens, washrooms and window perimeters all need joints that keep water out.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Place
- Keiss (KW1)
- Region
- Highland
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Why act early in Keiss
A brand roll-out or multi-site fit-out benefits from a consistent sealant colour. Setting one product and colour for every site avoids variation. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Keiss before they leak.
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Why choose Mastic Doctor in Keiss
- Colour agreed before work starts
- RAL and finish matching where the product range allows
- Fixed quotes based on photos, drawings or a visit
- 12 months’ guarantee on every job
Read our cost guide or how we’re accredited.
Your questions answered
Is a smaller place like Keiss outside your area?
No. Small places get the same service as large ones. Our area covers all of Scotland, cities, towns and islands alike. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Does the sea air around Keiss change the choice of sealant?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Which sealant will you use?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
What do you charge?
We don’t publish prices, as every site differs. With photographs or drawings, we can give you a fixed quote.
Can you match any colour exactly?
No, not in every case. We choose the nearest standard colour and a sample can be approved before the full run.
Can weather delay the job?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
How a job runs
On arrival, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before any cutting starts, with the work itself normally taking about the same time as any other sealant work, plus a little longer if a sample bead is agreed first. Travel to smaller Scottish places like Keiss is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- We confirm the joint type and the product it needs.
- We compare the target colour with the colours available.
- You approve the colour, on site if it’s critical.
- We cut out the existing bead, clean and set the depth.
- Edges are masked and the coloured sealant applied and tooled.
- We remove the masking and walk the finished joints with you.
Preparing the site
- Agree which areas must stay open
- Confirm the product named in the specification
- Point out parking and an unloading spot
Request a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, ring 01277 525 020 or email a schedule or drawings.
Read more
General trades versus a specialist
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong typically costs more in the end than doing them right.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Building owners, agents and FMs in Keiss
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Building owners and managing agents use us on everything from one building to a spread of sites around Keiss. Several sites can go on one quote, which keeps the paperwork simple.
What the job involves on each surface
Powder-coated and anodised frames
Frames finished to a RAL reference are a frequent colour-matching job. We compare the reference with the specified product’s colour range, and you confirm the choice.
Paintable sealants
Overpainting is most common on internal joints with little movement. We’ll tell you if a joint needs a non-paintable product.
Looking after the joints
A few simple habits keep the new joints working:
- Standardise colours across a portfolio
- Put the colour reference on the finishes schedule
- Keep the area clear while the sealant cures
- Plan full-run reseals on visible elevations
Give the sealant its full cure time before cleaning or handling the area. Fresh coloured beads show fingerprints and dust more easily, so keep the area clear.
Use one product and colour reference across a building or brand. It keeps repairs and new sites consistent for whoever reseals next.
Other services in Keiss
Coloured sealant around Keiss: what changes locally
The sea is no more than about 1 mile from Keiss. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. Sea-facing elevations are normally where failed joints show first. Keiss is on Scotland’s drier eastern side. Frost and condensation on winter mornings can still hold up external sealing.
For premises around Keiss where the joint is seen, colour options for the product are confirmed with the quote. A lasting commercial joint around Keiss begins with the old bead fully out and the faces clean and dry.
Keiss is about 15 miles east of Thurso, in Highland. Our applicators travel to Keiss for work on colour-matched joints. Across Highland, 256 places are covered, Keiss among them.
Postcode districts covered here: KW1 for colour-matched joints. Among the streets we cover are High Street, South Street and Robertson Crescent. Just outside Keiss, we also work in Reiss (4 miles south), Ackergillshore (4 miles south), Hastigrow (5 miles west), Staxigoe (6 miles south-east) and Haster (6 miles south). For island and remote sites, travel and materials need planning ahead, so the full address helps from the start.
What’s near Keiss
Nearby you will also find Caithness Broch Centre (2 miles north-east) and Keiss Castle (0.7 miles north-east). The countryside around Keiss includes Loch of Wester.