Coloured Sealant contractors in Gorgie
Coloured and colour-matched sealant for visible joints in Gorgie and across Edinburgh. CHAS accredited and fully insured, with a 12-month guarantee.
- A bead that fights the cladding or frame colour
- Joints that need to match a new RAL frame colour
- Weathered sealant that no longer matches
Coloured sealant in Gorgie
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
General trades versus a specialist
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Coloured sealant for commercial buildings in Gorgie
A coloured bead has to perform like any other sealant. Faces are prepared, depth is fixed with rod and the bead is tooled onto two sides only, exactly as for a standard colour. Clean masking and steady tooling give the sharp lines colour work needs. If you have dirty, discoloured joints in public areas and joints that need to match a new RAL frame colour, we can help. A specialist sealant contractor works differently from a general builder: in Gorgie, that means joint design, primers and backing rod as standard.
In Scotland’s cities, commercial premises are packed closely, from stone-fronted offices to shops on the ground floor of tenement blocks. Where a shop sits below tenement flats, work on the frontage or shared parts may involve the property factor.
We stand behind the joints we seal: 12 months, guaranteed. That covers our preparation and application, and if something we did falls short, we return to it.
- Location
- Gorgie (EH11, EH14, EH10)
- Region
- Edinburgh
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Do you need coloured sealant in Gorgie?
Internal joints can stain from cleaning products, spills or mould. Mould that has rooted into a bead rarely cleans out, so replacement is the fix.
Most enquiries start with something like this:
- Standard-colour sealant spoiling a high-end finish
- Previous reseals that don’t match the original
- Old colour-matched joints lifting at the edges
- Smeared sealant on stone or joinery
Refits at hotels like Tynecastle Park Hotel (to the north of Gorgie) bring joints at vanity tops, bars and reception desks that guests see every day.
Comparing quotes
- Is the sealant right for the movement and the substrate?
- Health and safety accreditation such as CHAS
- Proof of insurance
- How joint depth will be controlled
Why deal with it now?
A failed joint lets in water and dirt, whatever colour it is. Water through a split seal can stain or damage the surfaces next to it, so resealing protects the finishes as well as the look. In a tenement or shared city building, water from a failed joint can reach other owners’ property, which makes early repair simpler for everyone. Acting early avoids disputes and bigger repairs.
A quote for colour-matched joints depends on how many there are, their condition and the access, and any specification that applies. Ask us for a fixed quote.
What you get with us
- Standard and matched colours in many product ranges
- Work carried out by CSCS-carded applicators
- Specification-led, product-correct work
- Constructionline member
Take a look at our cost guide and how we’re accredited.
Coloured sealant around Gorgie: points for this area
The sea is no more than about 3 miles from Gorgie. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. We choose a product rated for the exposure, then confirm the colours available for it. A 2-mile radius around Gorgie takes in plenty of hotels. A hotel refurbishment is full of joints that guests will see, and a matched colour keeps them discreet, with rooms done in turn while the rest stay let.
Sites a few miles apart, such as West Gorgie Park Industrial Estate and Edinburgh West Retail Park, can share one programme and one point of contact. Offices and shops close to stations such as Slateford station, 0.6 miles to the south-west of Gorgie, tend to be busy all day, so sealant work is planned around opening hours.
Gorgie is about 1 mile south-west of Edinburgh, in Edinburgh. Gorgie sits inside our coverage and the rest of Edinburgh, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 174 places across Edinburgh fall within our area, including Gorgie.
Commercial sites across EH11, EH14 and EH10 are covered. If your site is on Appin Lane, Cowan Road and Gorgie Road or close by, we can quote for colour-matched joints. Close to Gorgie, our area also takes in Shandon (1 mile east), Polwarth (1 mile south-east), Westfield (1 mile north-west), Slateford (1 mile south-west) and Chesser (1 mile south-west). A short drive away, we cover Leith (4 miles north-east), Bonnington (3 miles north-east), Gayfield (3 miles north-east), Pilrig (3 miles north-east), North Leith (4 miles north-east) and Queensferry (7 miles north-west).
Near you in Gorgie
In Gorgie, that means premises near The Athletic Arms, Gabrielle Keiller Library and Harrison Park, among other places. You will also find Boroughmuir High School (1 mile east) and Iain Tomlin School of Music (0.8 miles east). For rail, the closest station is Slateford station, about 0.6 miles south-west of the centre. Other landmarks nearby include Royal Edinburgh Hospital (0.8 miles south-east) and Merchiston Tower (0.8 miles east). Open spaces near Gorgie include Craiglockhart Hill and Dunsapie Loch.
Diagnose, treat, sign off
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before any cutting starts, with the work itself usually taking a day for a modest shop fit, and longer for a full building or several floors. Give us the access times and building rules for your premises in Gorgie, and we’ll plan the work to suit, phased where areas need to stay in use.
- We confirm the joint type and the product it needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- The nearest colour is agreed, with a sample bead where needed.
- The existing bead comes out, then faces are cleaned and backed.
- Edges are masked and the coloured sealant applied and tooled.
- Masking comes off and the work is checked with you.
Preparing the site
- Agree which areas must stay open
- Make sure the joints can be reached
- Let building users know which areas are affected
Ask for a quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. For a chat about it beforehand, call the office on 01277 525 020 or email a schedule or drawings.
Related advice
After the work
Once the work is signed off, these steps help:
- Approve a sample bead on high-profile areas
- Settle the colour with the designer at the start
- Plan full-run reseals on visible elevations
- Keep the area clear while the sealant cures
Colours can soften with light and weathering. That is normal for exposed sealant, and a reseal brings it back.
Make sure every contractor knows which sealant and colour are on the building file. That keeps new work in line with what’s there.
Common questions from Gorgie clients
Does the sea air around Gorgie change the choice of sealant?
It can. Coastal exposure works external joints harder than inland weather. We check the specified product suits the exposure and pay close attention to preparation.
Does your area include sites such as West Gorgie Park Industrial Estate, near Gorgie?
Yes, sites like West Gorgie Park Industrial Estate are within our area, along with the rest of Gorgie. Send details of the unit and the work through our quote form for a quick quote.
Can you work to a RAL reference?
Yes. Many specifications give the sealant colour as a RAL number. We will confirm the colours available for the specified product and agree the choice with you.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
Can we see a sample before the full job?
Yes. Tell us who approves colour and we’ll plan the sample into the programme so sign-off doesn’t hold up the work.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
How do we ask for a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photographs and a postcode.
Other services in Gorgie
Cost factors for colour-matched joints
To price the job, we consider:
- Access and working height
- Backing rod, priming and other preparation
- Phasing around occupants
- Whether old sealant has to be cut out first
What a job costs comes down to how many linear metres there are, what has to come out first and the access. Call for a quote once you have the details.
Details that help us quote
To price the job accurately, we need a clear picture of the site. Useful things to include:
- Whether the building will be occupied during the work
- Any dates the work must fit around
- Any specification or named product
- Drawings or a marked-up plan, if available
To get a fixed quote, give us a call on 01277 525 020 or email the details over. You can also send details through our quote form.