Coloured and colour-matched sealant in Felderland, Kent
We carry out coloured and colour-matched sealant for visible joints in Felderland and the surrounding area. Send details for a fixed quote.
- Old sealant that has yellowed, darkened or faded
- Smeared sealant on stone or joinery
- Standard-colour sealant spoiling a high-end finish
Coloured sealant in Felderland
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our coloured sealant in Felderland
We can agree a short trial length before the full run. Cured sealant may look a shade different from the wet bead, and lighting changes it again, so approving a sample on site is worth doing. Tell us who needs to approve the colour and we will plan for it. We work on hotel bathrooms and public areas, powder-coated and anodised frames and cladding panels, and the failures we’re asked to look at most are standard-colour sealant spoiling a high-end finish and coloured joints that have cracked with movement. A specialist sealant contractor works differently from a general builder: on jobs in Felderland, preparation and product choice get the time they need.
Business units in the countryside around places like Felderland are often converted barns, stables or farmyards. Their mix of old walls with new frames, partitions and floors means many joints between unlike materials.
We stand by our work: 12 months, guaranteed. That covers our preparation and application, and if something we did falls short, we return to it.
- Place
- Felderland (CT14)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
After the work
Problems stay small when the joints are checked regularly. In particular:
- Plan full-run reseals on visible elevations
- Keep the same sealant colour across a brand
- Keep the area clear while the sealant cures
- Agree the sealant colour early and write it into the specification
If other trades disturb a coloured joint, ask them to tell you rather than patch it. Wrong-colour patches are obvious, undoing the look you paid for.
Include coloured joints in a planned maintenance cycle. Replacing them on a schedule keeps finishes looking right.
Work for main contractors and building owners
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
Felderland: questions and answers
Do hotels near Felderland have to close for sealant work?
Rarely, if ever. We take a few rooms out at a time. We agree the order of rooms and the timings with you before we start.
Is a smaller place like Felderland outside your area?
Not at all: smaller places are covered as well as towns. London and every South East county are within our area. Good photos up front let us bring everything on the first visit.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Can wet areas have colour-matched sealant?
Yes, in many cases. Coloured sanitary sealant suits tiled and stone wet areas.
Can you guarantee a perfect colour match?
No. We can’t promise an exact custom match. Sealants come in a wide range of standard colours, and we will confirm the colours available for the specified product so you can choose.
Does the colour affect how the joint performs?
The product type decides performance, not the colour. The joint gets the product it needs, in a colour from that product’s range, installed in exactly the same way.
Does coloured sealant change colour outdoors?
Exposed sealant can change in appearance over the years. Sunlight, dirt and weathering affect how it looks, and resealing brings the look back.
Surface by surface
Brick and masonry
Brickwork joints typically look best in a colour close to the mortar or brick. The nearest colour in the range is agreed with you.
Paintable sealants
Paintable sealants suit internal, low-movement joints best. If the joint needs a product that can’t be painted, we say so.
Our process
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. For work around Felderland, we aim to finish in one visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- We start with photographs, drawings or a visit to see the finishes.
- We send the closest colours from the product’s range.
- The programme and access are agreed, including any phasing.
- We prepare each joint, prime where needed and fit backing.
- We seal in the approved colour and tool it smooth.
What we need from you
- Share the asbestos register for older buildings
- Flag any permit to work we will need
- Warn occupants and staff about the work
Get a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Advice
Should maintenance staff do it?
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Cost factors for colour-matched joints
We price every job individually. The things that drive the figure:
- Site requirements such as inductions and permits
- Working within restricted access windows
- Removal of failed or old sealant
- Travel to remote or island sites
The product called for affects the cost, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.
What we need to price the job
It doesn’t need to be a full survey. These details are enough to start:
- Photos of the joints, close up and from further back
- The postcode of the building
- Your programme or deadline
- How the joints are reached, and at what height
To get a fixed quote, give us a call on 01277 525 020 or email the details over with the site address and an outline of the work. Our quote form is another easy route.
Nearby places to Felderland
More services for Felderland
Sealant on show in Felderland’s commercial buildings
Felderland is within about 3 miles of the coast. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. We choose a product rated for the exposure, then confirm the colours available for it. A number of hotels sit less than 2 miles from Felderland. In hotels, sealant shows everywhere, from bathroom joints to reception counters, so colour and a clean finish matter; work is planned so the hotel keeps trading.
For tenants and agents on sites such as Birnham Farm Business Centre (1.8 miles west of Felderland), office fit-outs, reception joints and window perimeters are the usual sealant work. In hotels such as The Fleur De Lys Hotel, 1.3 miles to the north of Felderland, refurbishments usually mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes. Premises within reach of Sandwich station (1 mile north-east of Felderland) often have busy frontages where joints are seen by everyone passing.
Felderland is about 4 miles north-west of Deal, in Kent. Anywhere in CT14, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Felderland is one of 931 places in Kent on our list for colour-matched joints. We also cover London, some 64 miles away.
Commercial sites across CT14 are covered for colour-matched joints. Streets here include Felderland Lane, Felderland Close and Deal Road, and sites on any of them can send details for a fixed quote. If your building is just outside Felderland, we cover Statenborough (1 mile west), Worth (1 mile east), Ham (1 mile south), Woodnesborough (1 mile north-west) and Sandwich (1 mile north). Bigger towns within reach include Canterbury (11 miles west), Margate (9 miles north), Dover (8 miles south), Folkestone (14 miles south-west), Ramsgate (7 miles north-east) and Broadstairs (8 miles north-east).
Local landmarks in Felderland
Around Felderland, our work takes us to commercial buildings near The Blue Pigeons pub, Worth Primary School and Ham Fen. The closest station to Felderland is Sandwich station, roughly 1 mile north-east of the centre. A little further out are Sandown Castle (3.3 miles south-east) and The Precinct Toy Collection (1.4 miles north). The countryside around Felderland includes Monk's Wall nature reserve.