Coloured and colour-matched sealant in Ham, Kent
We carry out coloured and colour-matched sealant for visible joints in Ham. Send details for a fixed quote.
- Colour changes after a rebrand or refit
- Untidy coloured beads with ragged edges
- Failed coloured sealant that has split or peeled
Coloured sealant across Ham
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Coloured sealant for commercial buildings in Ham
Where finishes matter, a white or grey bead in the wrong place stands out. We install coloured and colour-matched sealant so joints sit quietly against cladding, stone, brick, frames and shop-fit finishes, for clients in Ham. The right product for the joint always comes first, then the colour. If you are dealing with old colour-matched joints lifting at the edges and a run of joints in mismatched shades, we can help, whatever the surface. A single leaking joint is often how a building in Ham first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Rural business units near smaller places such as Ham are frequently converted agricultural buildings. Old masonry beside new aluminium, timber and plasterboard gives plenty of joints between materials that move differently, and a sealant colour that suits the building’s character is often part of the brief.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Location
- Ham (CT14)
- Wider area
- Kent
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Working on commercial sites near Ham
At about 64 miles from central London, Ham is within reach of the capital. This part of the South East is dense with business parks and out-of-town offices. Multi-site occupiers here often want one sealant contractor across all their buildings. The South East is one of the drier parts of the UK. External joints still need dry faces and the right temperature, and damp or frosty mornings can hold work up.
Parks like Birnham Farm Business Centre (1.9 miles north-west of Ham) see tenants come and go, and every move-in brings joints to seal.
Ham is about 3 miles north-west of Deal, in Kent. We cover Ham, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 931 places across Kent fall within our area, Ham among them. There’s a separate page for London, about 64 miles away.
Postcode districts covered here: CT14. We also cover Statenborough (1 mile north-west), Felderland (1 mile north), Worth (1 mile north-east), Marley (1 mile south-east) and Finglesham (1 mile south-east) for colour-matched joints. Bigger towns within reach include Canterbury (11 miles west), Margate (10 miles north), Dover (8 miles south), Folkestone (13 miles south-west), Ramsgate (7 miles north-east) and Broadstairs (9 miles north-east).
What’s near Ham
We work on buildings around Ham Fen, Sandwich Technology School and The Blue Pigeons pub, among other places. Ham’s nearest station is Sandwich station, roughly 1.7 miles north of the centre. Well-known places in the area include Sandown Castle (3.1 miles east) and The Precinct Toy Collection (2.1 miles north). Green spaces nearby include Monk's Wall nature reserve.
Our process
At the end of each section, we remove the tape, clean down and inspect every joint. If an area should be left alone while the sealant cures, we say how long and put signs out. For work around Ham, we aim to finish in one visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- Photos or drawings show us the finishes and joints.
- We send the closest colours from the product’s range.
- Tell us your site hours and access windows and we will plan around them.
- We prepare each joint, prime where needed and fit backing.
- We seal in the approved colour and tool it smooth.
Before we start on site
- Share your working hours and any access restrictions
- Warn occupants and staff about the work
- Let us know about inductions and permits
Getting a fixed quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. To get it moving, call the office on 01277 525 020 or send photos by email.
Read more
Your questions answered
Is Ham too far out for you?
Not at all. Ham is within our area. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Do you offer colour-matched sealant for buildings in Ham?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. Send colour references or photos and we will confirm what’s available for the product.
When can you be on site?
Mention the site’s hours and access windows in your enquiry, and we will schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
How do I request a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
Can you quote from photos?
It depends on the job. Straightforward work can often be priced from photos and measurements, and bigger or more complex jobs usually get a visit.
Is the work guaranteed?
Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
When it isn’t the sealant
Some faults sit outside our scope, and we say so rather than covering them up:
- Materials with mixed tones that defy a single match
- Paint over sealant on joints that move too much
- Exact bespoke colour matches beyond the product’s range
Not sure which it is? You can give us a call on 01277 525 020 or use the quote form and we’ll tell you honestly before you book.
What we seal
- Shop-fit joinery and counters
- Office fit-out finishes
- Powder-coated and anodised frames
- Hotel bathrooms and public areas
- Natural stone and brick
- Cladding panels
Maintenance after handover
For the best life from the joints:
- Avoid abrasive pads on coloured sealant
- Keep the colour details for future repairs
- Agree the sealant colour early and write it into the specification
- Protect fresh coloured sealant from dust and handling
Colours can soften with light and weathering. That is normal for exposed sealant.
Approve a sample where colour really matters. Seeing the cured colour in place avoids surprises.
Quoting for work in Ham
We price every job individually. The main factors are:
- Working within restricted access windows
- Distance, for remote addresses
- The size and state of each joint
- Any access equipment needed
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What we need to price the job
The more we know, the firmer the quote. Helpful details to send:
- Any specification or named product
- Whether an asbestos survey exists
- Whether the building will be occupied during the work
- Any dates the work must fit around
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. If you have questions first, give us a call on 01277 525 020 or use the quote form.
When to bring in a specialist
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Towns and villages near Ham
What else we do in Ham
Signs you need coloured sealant in Ham
A coloured joint can fail like any other: it can crack, peel or harden with age and movement. We cut out and reseal in the agreed colour.
Clients normally get in touch after noticing one or more of the following:
- Patch repairs in several different colours
- Coloured joints that have cracked with movement
- White or grey sealant that clashes with the finish
- Weathered sealant that no longer matches
Offices and shops close to stations such as Sandwich station, 1.7 miles north of Ham, tend to be busy all day, so sealant work is planned around opening hours.
What your quote should include
- How the joint faces will be prepared and primed
- How they handle RAMS and site documents
- What the guarantee covers, and for how long
- Are they CHAS accredited or on Constructionline?