Coloured Sealant contractors in Corstorphine
We carry out coloured and colour-matched sealant for visible joints in Corstorphine and the surrounding area. Send details for a fixed quote.
- Old sealant that has yellowed, darkened or faded
- Failed coloured sealant that has split or peeled
- A run of joints in mismatched shades
Coloured sealant in Corstorphine
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our coloured sealant in Corstorphine
Colour-matched joints are often among the last items before handover. Adjacent finishes are masked and protected while we work, and snag any marks before we leave. A 12-month guarantee covers our workmanship. Most enquiries involve weathered sealant that no longer matches and hotel refurbishments with a set colour scheme, across hotel bathrooms and public areas, office fit-out finishes and natural stone and brick. Whoever orders the work in Corstorphine, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Much of the older commercial stock in Scotland’s cities is sandstone or, in Aberdeen, granite. Sealing against stone means a neutral-cure sealant that leaves the stone unmarked and, where the joint is seen, a colour that blends.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Location
- Corstorphine (EH12, EH4)
- Wider area
- Edinburgh
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
How the job changes by surface
Shop-fit and joinery finishes
Retail fit-outs mix many finishes in a small space. Each joint gets a colour that suits the materials it sits between.
Powder-coated and anodised frames
Anodised and metallic frames rarely have an identical sealant colour. We show you the closest options in the product’s range.
On site: what to expect
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself usually takes a day for a modest shop fit, and longer for a full building or several floors, and our waste is bagged and taken away as we go. In a Scottish city, kerbside space and loading need planning, especially near the centre. Tenement closes, shared stairs and factor approvals may also be involved.
- We start with photographs, drawings or a visit to see the finishes.
- Colour options from the specified product’s range are shared with you.
- The programme and access are agreed, including any phasing.
- We prepare each joint, prime where needed and fit backing.
- We seal in the approved colour and tool it smooth.
Before we start on site
- Send any specification or drawings in advance
- Tell us your opening times and when work is allowed
- Tell staff and tenants when we will be in
Get a fixed quote
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. The easiest way is to speak to us on 01277 525 020 or email drawings and photos.
Advice
Also near Corstorphine
Also in Corstorphine
Site staff or a sealant specialist?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
What sets the cost
We price every job individually. The main factors are:
- Phasing around occupants
- Specialist products, such as fire-rated or hygienic sealants
- Removal of failed or old sealant
- How much there is to seal
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Details that help us quote
Whether it’s one area or a whole building, these details speed things up:
- Whether an asbestos survey exists
- Clear photos of the problem areas
- Any dates the work must fit around
- Rough lengths or quantities, or drawings if you have them
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Frontages, fit-outs and joints in Corstorphine
Corstorphine lies within about 3 miles of the sea. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. Sea-facing elevations are typically where failed joints show first. Corstorphine has at least three named business or industrial parks inside a 3-mile radius. Units on sites like these change tenants and get refitted, and each refit leaves joints to seal; brand colours often come into it.
In hotels such as Corstorphine Lodge Hotel, less than half a mile west of Corstorphine, refurbishments normally mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes. Sites a few miles apart, such as Corstorphine Retail Park and South Gyle Business Park, can share one programme and one point of contact.
Corstorphine is about 3 miles west of West End, in Edinburgh. Commercial clients in Corstorphine use us for work on colour-matched joints. Across Edinburgh, 174 places are covered, including Corstorphine.
If you need coloured sealant in EH12 and EH4, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are Manse Road, Gordon Road and Station Road, and sites on any of them can send details for a fixed quote. We also cover Wester Broom (1 mile south-west), Carrick Knowe (1 mile south-east), South Gyle (1 mile south-west), Drumbrae (1 mile north) and Clermiston (1 mile north). Further afield, our area takes in Edinburgh (3 miles east), Leith (5 miles north-east), Bonnington (5 miles north-east), Greenside (4 miles east), Broughton (4 miles east) and Bellevue (4 miles east).
Landmarks near Corstorphine
Locally, jobs take us to sites close to The Torfin pub and Saughton Park and the streets around them. For rail, the closest station is South Gyle station, roughly 0.7 miles south-west. Nearby you’ll also find Craigcrook Castle (1.1 miles north-east) and The Gyle Shopping Centre (1.1 miles west). Not far away are The New Leaf Co-op and Corstorphine Hill.
Questions we’re asked in Corstorphine
Can being near the sea in Corstorphine affect the sealant we need?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Must a hotel around Corstorphine close while you work?
Rarely, if ever. We take a few rooms out at a time. The plan is built around your bookings.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Can we approve the colour on site?
Yes. Tell us who approves colour and we will plan the sample into the programme.
Will the sealant be an exact match to our finish?
No. We can’t promise an exact custom match. We will show you the closest colours in the specified product’s range.
How do we ask for a quote?
The quote form is the simplest route, though you can also speak to us on 01277 525 020 or send details through our quote form. Photos, drawings or a joint schedule help us quote quickly.
How many days will you need on site?
It depends on the scope, but the work normally takes about the same time as any other sealant work, plus a little longer if a sample bead is agreed first. For bigger or phased jobs, we will set out a timescale with the quote.
Commercial clients in Corstorphine
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Corstorphine can form part of a wider programme across Edinburgh.
Building owners and managing agents use us on everything from one building to a spread of sites. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Signs you need coloured sealant in Corstorphine
Older sealant changes colour over time. UV, grime and weathering alter how a bead looks after a few years, and an old match drifts. A reseal brings the colour back in line.
Things that normally lead to an enquiry:
- Failed coloured sealant that has split or peeled
- Old sealant that has yellowed, darkened or faded
- Stained or mouldy coloured joints in washrooms
- A run of joints in mismatched shades
Shops and cafés around stations like South Gyle station (0.7 miles south-west of Corstorphine) trade from early, so work is timed around them.
Questions to ask before you book
- Will failed sealant be removed rather than covered?
- Do they follow the manufacturer’s priming guidance?
- Their plan for phasing and protecting the area
- The named product and why it was chosen