Clivocast coloured sealant
Coloured sealant in Clivocast, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Failed coloured sealant that has split or peeled
- Dirty, discoloured joints in public areas
- White or grey sealant that clashes with the finish
Coloured sealant in Clivocast
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
On site: what to expect
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Where we can, we combine work around Clivocast with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.
- We confirm the product the joint needs before talking about colour.
- We compare your RAL reference or sample with the colours made for that sealant.
- Where colour is critical, a sample bead can be agreed in a discreet spot.
- We take out the existing bead, clean the joints and fit backing.
- The coloured sealant is applied and tooled with clean, masked edges.
Getting the site ready
- Make sure the joints can be reached
- Let building users know which areas are affected
- Send asbestos survey details if the building is pre-2000
Quotes
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or give us a call on 01277 525 020 or email a schedule or drawings to discuss it first.
Related advice
Coloured sealant in Clivocast, done properly
We take on colour-matched work across new fit-outs, refurbishments and resealing of existing joints. On resealing, matching the existing colour is often as important as the seal itself, particularly where the building’s look matters. Site teams most often ask us about poorly tooled joints on visible finishes and discoloured joints on a visible elevation, on natural stone and brick, powder-coated and anodised frames and hotel bathrooms and public areas. Most enquiries from Clivocast start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Around smaller places such as Clivocast, the commercial buildings tend to be hospitality, local shops, schools, health centres and converted rural buildings. Each has kitchens, washrooms and frames that depend on sound joints.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Place
- Clivocast (ZE2)
- Region
- Shetland Islands
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Sealant on show in Clivocast’s commercial buildings
With the shore within about 1 mile, Clivocast counts as a coastal location. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. Sea-facing elevations are normally where failed joints show first. The east of Scotland, where Clivocast is, gets less rain than the west. Frost and condensation on winter mornings can still hold up external sealing. Outside work is booked with that in mind
For any commercial premises in Clivocast, a lasting joint depends on full removal of the old sealant and clean, dry faces. Where a joint is on show in Clivocast, we’ll check which shades the product offers before work starts.
Clivocast is in the Shetland Islands. Businesses, contractors and managing agents in Clivocast can call on us for colour-matched joints, as part of our coverage of the Shetland Islands. Across the Shetland Islands, 63 places are covered, including Clivocast.
Postcode districts covered here: ZE2. If your building is just outside Clivocast, we cover Cullivoe (4 miles north-west), Baltasound (6 miles north), Houbie (6 miles south), Camb (7 miles south-west) and Mid Yell (8 miles south-west). For island and remote sites, travel and materials need planning ahead.
Near you in Clivocast
A little further out are Muness Castle (1.8 miles east). The countryside around Clivocast includes Easter Loch and Valla Field.
Why it’s worth doing now in Clivocast
People notice sealant lines more than you might expect, particularly on high-end finishes. Resealing in a suitable colour is a modest cost against the finishes it sits beside. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Clivocast before they leak.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
What you get with us
- RAL and finish matching where the product range allows
- Work to your specification and the manufacturer’s guidance
- Standard and matched colours in many product ranges
- Commercial sealant work since 2005
Take a look at what affects the cost or how we’re accredited.
Surface by surface
Brick and masonry
Vertical movement joints run the full height of many brick walls. The right colour keeps them discreet.
Office fit-outs
In offices, sealant appears at partitions, tea points, washrooms and reception desks. Colour-matched joints keep the finish consistent across floors at handover.
Places near Clivocast
More services for Clivocast
What sealant work can’t fix
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Custom-mixed sealant colours
- Cleaning or repairing the surrounding finishes
- Paintable products in joints they aren’t suited to
If you’re not sure, just ring 01277 525 020 or email the details over and we’ll give you a straight answer.
Where we work in Clivocast
- Cladding panels
- Natural stone and brick
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
- Shop-fit joinery and counters
- Office fit-out finishes
What affects the price in Clivocast
These are the things that shape the price:
- Whether old sealant has to be cut out first
- The product specified
- Site requirements such as inductions and permits
- How accessible the joints are
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What we need to price the job
There’s no need for a formal survey. These details are enough to start:
- Where the site is, with the postcode
- Clear photos of the problem areas
- What the building is and how it’s used
- Whether an asbestos survey exists
To get a fixed quote, speak to us on 01277 525 020 or use the quote form, telling us the site location and the nature of the job. You can also send details through our quote form.
Common questions from Clivocast clients
Is Clivocast inside the area you cover, given it’s on an island?
Yes. Islands are part of our area, Clivocast included. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.
Can you supply sealant in our brand colour for a site in Clivocast?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. The quote lists the colours the product is made in.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Will you come and look before quoting?
It depends on the job. Straightforward work can often be priced from photographs and measurements, and bigger or more complex jobs typically get a visit.
How much does the work cost?
Each job is quoted on its own details. For yours, speak to us on 01277 525 020 or email the details over.
How do I request a quote?
You can use the quote form on this site; alternatively, ring 01277 525 020 or email us. Photos, drawings or a joint schedule help us quote quickly.
Should maintenance staff do it?
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.