Baltasound coloured sealant
We carry out coloured and colour-matched sealant for visible joints in Baltasound. Send photographs or drawings for a fixed quote.
- Failed coloured sealant that has split or peeled
- Discoloured joints on a visible elevation
- Untidy coloured beads with ragged edges
Coloured sealant for Baltasound sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our coloured sealant in Baltasound
A colour-matched bead still has to work as a seal. Faces are prepared, depth is fixed with rod and the bead is tooled onto two sides only. Clean masking and steady tooling give the sharp lines colour work needs. If you have shop fits that need consistent sealant colours across sites and discoloured joints on a visible elevation, we can help, on shop-fit joinery and counters, powder-coated and anodised frames and office fit-out finishes alike. Facilities teams, main contractors and managing agents in Baltasound tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
For a job around Baltasound, the Scottish weather is part of the planning: sealant needs a dry joint and the right temperature, so external work has a weather window built in. Internal joints can be done whatever the day brings.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Place
- Baltasound (ZE2)
- Region
- Shetland Islands
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Your questions answered
Does a coastal location like Baltasound affect which sealant is used?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Can the sealant on our Baltasound premises match the finishes?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. The quote lists the colours the product is made in.
Do you take on small jobs?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
How long does a job like this take?
That varies with the scale of the job, but the work usually takes a day for a modest shop fit, and longer for a full building or several floors. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Which sealant will you use?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Can the building stay open while you work?
Typically, yes. Phased work can be planned so areas stay in use.
What will the job cost?
There isn’t a price list, as every site differs. Send photographs or drawings and we’ll price it at a fixed figure.
What affects the price in Baltasound
What shapes the price:
- Removal of failed or old sealant
- Quantities, in metres or numbers
- How accessible the joints are
- Location, for remote and island sites
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote and we’ll explain how it’s made up.
What to include in your enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- Rough lengths or quantities, or drawings if you have them
- The asbestos register, for older buildings
- Any dates the work must fit around
- What the building is and how it’s used
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. For smaller jobs, photos and a description will do.
Commercial clients in Baltasound
Building owners and managing agents use us on everything from one building to a spread of sites. Several sites can go on one quote, which keeps the paperwork simple.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
Diagnose, treat, sign off
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. Where we can, we combine work around Baltasound with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.
- We confirm the product the joint needs before talking about colour.
- We compare your RAL reference or sample with the colours made for that sealant.
- Where colour is critical, a sample bead can be agreed in a discreet spot.
- We remove the existing bead, clean the faces and set the depth.
- The coloured sealant is applied and tooled with clean, masked edges.
Before we start on site
- Explain the parking and delivery arrangements
- Let us know about inductions and permits
- Tell staff and tenants when we’ll be in
Get a fixed quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Read more
After the work
To get the most from the new sealant:
- Look at the cured colour before the full run
- Ask contractors to check the colour before resealing
- Use one colour standard across multi-site work
- Reseal whole runs rather than patching single joints
Include coloured sealant in planned building checks. Look for splits, lifting edges and staining and deal with problems early.
Put the sealant colour into the specification or finishes schedule. When colour is left to the last minute, it is often wrong, so agree it with the designer at the start.
When to call us in Baltasound
Older sealant changes colour over time. Sunlight, dirt and pollution can darken, yellow or chalk the surface, so joints that once matched no longer do. Resealing is the chance to reset the colour.
Look out for the following:
- Weathered sealant that no longer matches
- A bead that fights the cladding or frame colour
- Smeared sealant on stone or joinery
- Previous reseals that don’t match the original
A lasting commercial joint around Baltasound begins with the old bead fully out and the faces clean and dry.
What your quote should include
- Their approach to joint depth and backing
- What level of public liability insurance do they hold?
- Will failed sealant be removed rather than covered?
- How they handle RAMS and site documents
Commercial premises in Baltasound
With the shore within about 2 miles, Baltasound counts as a coastal location. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. Sea-facing elevations are normally where failed joints show first. Baltasound is on Scotland’s drier eastern side. Cold, frosty mornings and condensation on steel and glass can still delay outside work. Outside work is booked with that in mind
A hotel such as Baltasound Hotel (to the east of Baltasound) shows how much sealant a hospitality building has on show, from bathroom joints to the bar.
Baltasound is in the Shetland Islands. Baltasound sits inside our coverage and the rest of the Shetland Islands, with the same fixed quotes and 12-month guarantee as everywhere else. Baltasound is one of 63 places we cover in the Shetland Islands.
Commercial sites across ZE2 are covered. We cover commercial and managed buildings on Setters Hill Estate, Curlew Avenue and Cormorant Way and the roads nearby. Just outside Baltasound, we also work in Haroldswick (3 miles north-east), Clivocast (6 miles south), Cullivoe (6 miles south-west), Houbie (11 miles south) and Camb (12 miles south-west). Baltasound is one of the busier places in the Shetland Islands, and its commercial and public buildings are all within our area. Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you speak to us on 01277 525 020 or email us.
Local landmarks in Baltasound
Other landmarks nearby include Unst Boat Haven (2.1 miles north-east). Open spaces near Baltasound include Loch of Beiton and Muckle Heog.
Why it’s worth doing now in Baltasound
A failed joint lets in water and dirt, whatever colour it is. Behind the bead, moisture can damage substrates and finishes. Around smaller places like Baltasound, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Early resealing prevents it.
The specified product makes a difference, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Why appoint us
- Health and safety: CHAS accredited
- A Constructionline member, so easy to vet
- Sealing commercial buildings since 2005
- Failed material removed, not covered up
Take a look at how commercial sealant jobs are priced or our accreditations.