Coloured and colour-matched sealant in Broomhill, Aberdeen
Coloured and colour-matched sealant for visible joints throughout Broomhill and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Coloured joints that have cracked with movement
- Stained or mouldy coloured joints in washrooms
- White or grey sealant that clashes with the finish
Coloured sealant for Broomhill sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our coloured sealant in Broomhill
On a finished interior or a high-quality elevation, the sealant is part of the look. Our coloured sealant work blends joints into the surrounding materials, from powder-coated frames to stone and brick, on commercial projects around Broomhill. Performance decides the product; the colour is chosen from that product’s range. We work on hotel bathrooms and public areas, cladding panels and shop-fit joinery and counters, and the failures we are asked to look at most are standard-colour sealant spoiling a high-end finish and patch repairs in several different colours. Searching for sealant specialists in Broomhill? Mastic Doctor has worked for contractors, FMs and building owners since 2005, CHAS accredited and a Constructionline member.
Natural stone gives a lot of Scottish city premises their character: sandstone in most, granite in Aberdeen. Sealing against stone means a neutral-cure sealant that leaves the stone unmarked and, where the joint is seen, a colour that blends.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Broomhill (AB10, AB15, AB12)
- Wider area
- Aberdeen
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
What sets the cost
These are the things that shape the price:
- Travel to remote or island sites
- The total length or number of joints
- Working within restricted access windows
- Induction, permit and paperwork requirements
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
Before you send an enquiry
To price the job accurately, we need a clear picture of the site. Send us:
- Anything awkward about access or site hours
- Rough lengths or quantities, or drawings if you have them
- Your programme or deadline
- A wide shot and a close-up of the area
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Questions about Broomhill
Does a coastal location like Broomhill affect which sealant is used?
It can. Coastal exposure works external joints harder than inland weather. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Does your area include sites such as Garthdee Retail Park, near Broomhill?
Yes. Our area takes in Broomhill and its surroundings, with estates and business parks such as Garthdee Retail Park included. Photos and a short description are enough for a first look.
Can we approve the colour on site?
Yes. A trial length can be applied and approved before the full run. The colour can shift a little as it cures, so seeing it in place helps.
Do you match sealant to RAL colours?
Yes. RAL references are a common way to specify sealant colour. We check what that product is made in and agree the nearest option.
Will the sealant be an exact match to our finish?
No, not in every case. We choose the nearest standard colour and a sample can be approved before the full run.
What hours do you work?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
Do you work in Broomhill?
Yes. We cover Broomhill, and you can give us a call on 01277 525 020 or email a schedule or drawings to get started.
Working on commercial sites near Broomhill
The sea is no more than about 3 miles from Broomhill. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. Sea-facing elevations are normally where failed joints show first. The east of Scotland, where Broomhill is, gets less rain than the west. Cold snaps still affect when external joints can be sealed. We plan external frontages and frames around that
Sites a few miles apart, such as Garthdee Retail Park and Kincorth Shopping Centre, can share one programme and one point of contact. Refits at hotels like Palm Court Hotel, 0.8 miles west of Broomhill, bring joints at vanity tops, bars and reception desks that guests see every day.
Broomhill is about 2 miles south of Aberdeen, in Aberdeen. Broomhill sits inside our coverage and the rest of Aberdeen, with the same fixed quotes and 12-month guarantee as everywhere else. Broomhill is one of 40 places in Aberdeen on our list for colour-matched joints.
We cover the AB10, AB15 and AB12 postcode districts for colour-matched joints. Streets here include Ruthrie Road, Norfolk Road and Kaimhill Road, and sites on any of them can send details for a fixed quote. With the A93 nearby, Broomhill is easy to get to with materials and equipment. We also cover Kaimhill (1 mile south), Garthdee (1 mile south-west), West End (1 mile north-west), Braeside (1 mile west) and Kincorth (1 mile south-east). Bigger towns within reach include Dyce (6 miles north-west), Tillydrone (3 miles north), Donside Village (3 miles north), Cummings Park (3 miles north), Danestone (3 miles north) and Bucksburn (4 miles north-west).
Near you in Broomhill
We work on buildings around Airyhall Primary School, North East of Scotland Music School and Duthie Park and the streets around them. Broomhill’s nearest station is Aberdeen station, roughly 1.4 miles north-east. A little further out are Trinity Centre (1.5 miles north-east) and Aberdeen Trades Hospitals (1.6 miles north-east). Open spaces near Broomhill include Upper Lake and Kincorth Hill.
What we’re called out for in Broomhill
Older sealant changes colour over time. Sunlight, dirt and pollution can darken, yellow or chalk the surface, and an old match drifts. A reseal brings the colour back in line.
Look out for the following:
- Old sealant that has yellowed, darkened or faded
- Poorly tooled joints on visible finishes
- A run of joints in mismatched shades
- Colour changes after a rebrand or refit
For premises near Aberdeen station, 1.4 miles to the north-east of Broomhill, footfall is part of the plan: work is phased so shops and offices keep trading.
What your quote should include
- Their public liability cover
- What site paperwork they can supply
- The terms of the workmanship guarantee
- Will failed sealant be removed rather than covered?
Also in Broomhill
After the work
Once the work is signed off, these steps help:
- Clean coloured joints with mild products
- Standardise colours across a portfolio
- Approve a sample bead on high-profile areas
- Protect fresh coloured sealant from dust and handling
Note the sealant type and colour on the building file. It makes matching later repairs much easier, with no guesswork.
Plan resealing of visible joints before they look tired. A planned reseal avoids a run of patch repairs.
How a job runs
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. Give us the access times and building rules for your premises in Broomhill, and we’ll plan the work to suit, phased where areas need to stay in use.
- First we agree which sealant type the joint needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- We cut out the existing bead, clean and set the depth.
- We mask, seal and tool to a clean line.
- We remove the masking and walk the finished joints with you.
Getting the site ready
- Share the asbestos register for older buildings
- Tell us what induction or permit system the site runs
- Share your working hours and any access restrictions
Get a fixed quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to call the office on 01277 525 020 or use the quote form.
Read more
Different surfaces, different methods
Brick and masonry
On brick, the sealant often matches the mortar rather than the brick face. We choose a suitable shade from the product’s range for the elevation.
Office fit-outs
In offices, sealant appears at partitions, tea points, washrooms and reception desks. A consistent colour across floors looks deliberate for the tenant.
Why it’s worth doing now in Broomhill
Standard white or grey sealant is cheaper to stock, but it doesn’t always suit the finish. Where joints are on show, choosing a better colour is normally worth it in how the finished space looks. Scottish city buildings take plenty of rain, so a split or hardened joint lets water into the wall. Resealing promptly protects the stone and the interior.
Pricing colour-matched joints depends on how many there are, their condition and the access, and any specification that applies. Call for a quote.
What you get with us
- Old sealant cut out, never sealed over
- Our applicators hold CSCS cards
- Colours confirmed for the specified product
- Health and safety: CHAS accredited
Take a look at what affects the cost or our accreditations and insurance.