Allington coloured sealant
Work needed on a colour-matched joint in Allington? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Marked sealant in hotel bathrooms
- Discoloured joints on a visible elevation
- A run of joints in mismatched shades
Coloured sealant for Allington sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Coloured sealant in Allington
Stone, brick and cladding each bring their own colour challenge: a stone or brick facade shifts in tone from one area to the next. We choose a colour that reads well across the surface rather than chasing one spot, with a sample on site if colour is critical. We work on office fit-out finishes, natural stone and brick and shop-fit joinery and counters, and the usual reasons a site gets in touch are discoloured joints on a visible elevation and fit-outs with a sealant colour in the specification. A specialist sealant contractor works differently from a general builder: on jobs in Allington, preparation and product choice get the time they need.
For a business in Allington, it usually makes sense to put the sealant work into one visit: frontage, staff facilities and window perimeters on one booking. Fewer visits means less disruption to trading.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Allington (ME16, ME20, ME14)
- Region
- Kent
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Common questions from Allington clients
Can you work at a site such as Mid Kent Shopping Centre, by Allington?
Yes. Our area takes in Allington and its surroundings, with estates and business parks such as Mid Kent Shopping Centre included. A few photographs and the unit address let us price the work.
Will our hotel in Allington need to close for the work?
Rarely, if ever. We take a few rooms out at a time. We agree the order of rooms and the timings with you before we start.
Can you work to a RAL reference?
Yes. RAL references are a common way to specify sealant colour. We check what that product is made in.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Can weather delay the job?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Can you work while the building is occupied?
Usually, yes. Phased work can be planned so areas stay in use.
Can you match any colour exactly?
No, not always. We choose the nearest standard colour.
Building owners, agents and FMs in Allington
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
We work for building owners and managing agents on everything from one building to a spread of sites around Allington. Several sites can go on one quote, which keeps the paperwork simple.
Maintenance after handover
A few simple habits keep the new joints working:
- Standardise colours across a portfolio
- Don’t let trades patch coloured joints with a random sealant
- Clean coloured joints with mild products
- Plan full-run reseals on visible elevations
Clean coloured joints with mild, non-abrasive products. Harsh chemicals and scouring can change how the colour looks over time.
Use one product and colour reference across a building or brand. Consistency makes future work simpler and easier to manage.
Diagnose, treat, sign off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work usually takes a few hours or a phased programme, depending on joint lengths and how many colours are involved, and our waste is bagged and taken away as we go. If neighbouring businesses or buildings around Allington need work too, visits can be combined. Mention the building’s opening times and we’ll work within them.
- Photos or drawings show us the finishes and joints.
- Colour options from the specified product’s range are shared with you.
- The programme and access are agreed, including any phasing.
- Joints are prepared, primed where specified and backed.
- The agreed colour is installed and tooled neatly.
Before we start on site
- Point out parking and an unloading spot
- Move anything stored against the joints
- Tell us what induction or permit system the site runs
Quotes
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to call 01277 525 020 or email us.
Read more
Why it’s worth doing now in Allington
A failed joint lets in water and dirt, whatever colour it is. Water through a split seal can stain or damage the surfaces next to it. Over time, UV, weather and movement wear any sealant out. Renewing it in good time keeps the building weathertight.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What you get with us
- Constructionline member for supplier checks
- Health and safety: CHAS accredited
- Products installed to the manufacturer’s instructions
- 12-month guarantee on workmanship
Surface by surface
Shop-fit and joinery finishes
Shop fits bring laminate, timber, metal and stone together, each with its own colour. We choose sealant colours that suit each junction.
Hotel interiors
Hotels use colour-matched sealant in bathrooms, bedrooms and public areas. Sanitary silicone comes in colours too.
When it isn’t the sealant
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Overpainting a joint that needs a non-paintable product
- Colour variation across natural stone or brick that no single shade can match
- Exact bespoke colour matches beyond the product’s range
Not sure which it is? You can call the office on 01277 525 020 or email a schedule or drawings and we’ll tell you honestly before you book.
What we seal
- Office fit-out finishes
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
- Shop-fit joinery and counters
- Cladding panels
- Natural stone and brick
Commercial premises in Allington
Central London is about 29 miles from Allington. Business parks and retail centres are common around the capital’s motorway corridors. Occupiers with several premises in the region tend to prefer one contractor and one point of contact. Allington has two care or nursing homes no more than 2 miles away. Care homes need tidy, cleanable joints in kitchens, corridors and communal rooms; colours can be chosen to suit the interior.
For premises near Barming station, which lies west of Allington, footfall is part of the plan: work is phased so shops and offices keep trading. For a hotel such as Grange Moor Hotel (1.2 miles south of Allington), the colour of a joint at the bar or the bath matters to the look of the room. If you look after units at a retail site such as Mid Kent Shopping Centre, which lies south-east of Allington, shopfront perimeters and shop-fit joints are where a matched colour shows.
Allington is about 2 miles north-west of Maidstone, in Kent. Any commercial site in Allington is covered, whether it’s a single job or part of a planned programme. 931 places across Kent fall within our area, including Allington. London is covered too, around 29 miles from Allington.
We take on colour-matched joints across the ME16, ME20 and ME14 postcode area, whatever the building. We cover commercial and managed buildings on Wyatt Road, Beaver Road and Godwin Road and the roads nearby. If your building is just outside Allington, we cover Aylesford (1 mile north-west), Fant (1 mile south), Ditton (2 miles west), East Farleigh (2 miles south) and Kettle Corner (2 miles south-west). Bigger towns within reach include Sittingbourne (11 miles east), Sevenoaks (13 miles west), Royal Tunbridge Wells (14 miles south-west), Gravesend (11 miles north-west), Tonbridge (11 miles south-west) and Northfleet (12 miles north-west).
Landmarks near Allington
Recent enquiries here include premises near St. Simon Stock Catholic School, Whatman Park and Malta Inn, among other places. For rail, the closest station is Barming station, roughly 0.8 miles west of the centre. A little further out are Queen's Own Royal West Kent Regiment Museum (1.3 miles south-east) and Fremlin Walk (1.3 miles south-east). The countryside around Allington includes Burham Down and Boxley Hills.