Washroom Sealing contractors in Tilford Reeds
Work needed on a washroom in Tilford Reeds? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Black mould inside silicone joints that cleaning can’t shift
- Failed sealant in a tea point or staff kitchen
- Complaints from staff, guests or users about tired washrooms
Washroom sealing near Tilford Reeds
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Surface by surface
Basins and vanity tops
A failed joint along a vanity unit lets water into the carcass. Resealing early protects the unit.
Changing rooms and gyms
Showers, floor edges and vanity units in changing rooms all need sound sealant and we look at them as one job.
Washroom sealing in Tilford Reeds, done properly
Since 2005 we have resealed commercial washrooms for facilities teams, contractors and building owners. Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We are fully insured. Our workmanship is guaranteed for 12 months. If you have sealant laid over old silicone and now peeling and split or peeling sealant at shower trays, we can help, whatever the surface. A specialist sealant contractor works differently from a general builder: in Tilford Reeds, that means joint design, primers and backing rod as standard.
In and around smaller places like Tilford Reeds, washroom work is often in halls, pubs, primary schools, care homes and holiday accommodation. Sealant that has gone black with mould usually can’t be cleaned, so it is cut out and replaced.
We stand by our work: 12 months, guaranteed. That covers our preparation and application.
- Where
- Tilford Reeds (GU10)
- Wider area
- Surrey
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Tilford Reeds: questions and answers
Is a hospital such as Farnham Community Hospital somewhere you can work?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Can you work around term dates at a campus such as University for the Creative Arts?
Yes, holiday working periods are the norm on campus jobs. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
How long does a job like this take?
We plan the time on site around your programme and access. We will give you an estimate of time on site when we quote.
When can showers be used after new sealant?
The silicone needs time to cure before water reaches it. We plan the phasing around that so facilities are never short.
Is it OK to put new silicone on top of the old?
The failed bead is always removed. New silicone won’t stick to the old, so sealing over it soon peels.
Does weather matter for sealant work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
When something else is needed
Not every problem is a sealant problem, and we’d rather tell you before you spend money. These need a different solution:
- Fittings that move too much to hold a bead
- Water from plumbing, not from a joint
- Condensation from failed extract fans
If in doubt, call 01277 525 020 or send photos by email and we’ll say what we think before you book.
Joints and surfaces we work on
- Showers, trays and wet room floors
- IPS panels and cubicles
- Urinals and WCs
- Accessible toilets and changing rooms
- Vanity units and basins
- Kitchens and tea points
Places near Tilford Reeds
What else we do in Tilford Reeds
What happens if it’s left?
Running fresh silicone along a failed bead hides the problem briefly. Silicone won’t grip silicone, so it lifts and holds moisture underneath. Full removal and proper cleaning is what makes the new joint last. Converted and older buildings near places like Tilford Reeds tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why choose Mastic Doctor in Tilford Reeds
- Colour agreed before work starts
- Coloured sealants to suit the setting, where available
- 12-month guarantee on workmanship
- A Constructionline member, so easy to vet
Read our cost guide and how we’re accredited.
How the quote is worked out
We price every job individually. The main factors are:
- Phasing around occupants
- The total length or number of joints
- Access and working height
- Location, for remote and island sites
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
Details that help us quote
There’s no need for a formal survey. A few details are enough to get going:
- Whether the building will be occupied during the work
- Any specification or named product
- A wide shot and a close-up of the area
- Your programme or deadline
Need a figure for a tender or a budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, call 01277 525 020 or email drawings and photos.
When to call us in Tilford Reeds
Sometimes the sealant fails because something behind it is moving or wet: a loose panel, a leaking waste or water coming through the wall. We look for it before resealing and say if it needs a plumber or another trade.
Most enquiries start with one or more of the following:
- Urinal joints that look unhygienic
- Kitchen worktop joints that can’t be kept clean
- Sealant laid over old silicone and now peeling
- Split or peeling sealant at shower trays
In a centre such as Farnham Retail Park (2.6 miles north of Tilford Reeds), public washrooms are resealed a block of facilities at a time.
Questions to ask before you book
- Their public liability cover
- Are they CHAS accredited or on Constructionline?
- Will failed sealant be removed rather than covered?
- Is the sealant right for the movement and the substrate?
From enquiry to sign-off
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. Smaller jobs around Tilford Reeds can be grouped with others nearby. You’ll have a fixed quote before work starts.
- We inspect each washroom and record the joints to be resealed.
- The fixed quote sets out the rooms, the products and the phasing.
- Old sealant is removed completely and the faces cleaned.
- Joints are degreased and dried.
- A sanitary silicone bead is laid and given a smooth tooled finish.
- Each area is handed back when ready.
What we need from you
- Arrange parking or a loading space
- Agree which areas must stay open
- Flag any permit to work we’ll need
Getting a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or speak to us on 01277 525 020 or use the quote form to discuss it first.
Read more
Keeping Tilford Reeds washrooms open while we work
Tilford Reeds lies roughly 36 miles out from central London. Washrooms in commuter-belt offices take constant weekday traffic, so we work a block of facilities at a time.
For a hall at a building such as Church of All Saints, resealing the kitchen and toilets can be fitted between bookings. On a healthcare site such as Farnham Community Hospital (2.8 miles north of Tilford Reeds), washroom work starts with the infection-control team’s sign-off.
Tilford Reeds is about 2 miles south-east of Farnham, in Surrey. Anywhere in GU10, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. 379 places across Surrey fall within our area, including Tilford Reeds. Our Reading page has more on work in that area (21 miles or so).
Commercial sites across GU10 are covered. Close to Tilford Reeds, our area also takes in Tilford (1 mile north-east), Tilford Common (1 mile south-east), Millbridge (1 mile south-west), Lower Bourne (1 mile north-west) and Shortfield Common (2 miles west). Further afield, our area takes in Guildford (9 miles north-east), Woking (12 miles north-east), Camberley (11 miles north), Frimley (9 miles north), Haslemere (7 miles south) and Cranleigh (13 miles east).
Local landmarks in Tilford Reeds
We work on buildings around Moor Park, Edgeborough School and South Farnham School. For rail, the closest station is Farnham station, roughly 2.3 miles north-west. Nearby you’ll also find Farnham Castle (3 miles north-west) and Museum of Farnham (2.7 miles north-west). Not far away are Upper Lake and Farnham Heath.