Tenston washroom sealing
Our CSCS-carded applicators take on sealing in commercial washrooms, showers, kitchens and wet areas in Tenston and the surrounding area. Send details for a fixed quote.
- Black mould inside silicone joints that cleaning can’t shift
- Discoloured joints around urinals and WC pans
- Failed joints along IPS and cubicle panels
Washroom sealing for Tenston sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Do you need washroom sealing in Tenston?
Much of the failed sealant we remove was applied over old silicone or residue. New silicone won’t grip the old so it peels away quickly.
Things that typically lead to an enquiry:
- Panel joints letting water behind
- Discoloured joints around urinals and WC pans
- Sealant lifting along a tray edge
- Gaps where vanity tops meet the wall
In any commercial washroom in or near Tenston, mouldy sealant is cut out rather than cleaned, and anti-mould sanitary silicone goes on clean, dry joints.
What to look for in a quote
- How they handle RAMS and site documents
- How the existing material will be dealt with
- Can the work be phased to keep areas open?
- How long is the guarantee, and what does it include?
How we handle washroom sealing in Tenston
Since 2005 we have resealed commercial washrooms for facilities teams, contractors and building owners. We are CHAS accredited and a Constructionline member, with CSCS-carded applicators. There is public liability insurance behind every job. Every resealed washroom carries our 12-month guarantee. Site teams most often ask us about complaints from staff, guests or users about tired washrooms and kitchen worktop joints that can’t be kept clean, across IPS panels and cubicles, kitchens and tea points and vanity units and basins. Facilities teams, main contractors and managing agents in Tenston tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Hospitality around smaller Scottish places like Tenston tends to be seasonal, and resealing washrooms in the quieter months keeps rooms available when they’re needed.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Place
- Tenston (KW16)
- Wider area
- Orkney Islands
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
From enquiry to sign-off
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. For a building near Tenston, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.
- Every room is surveyed and the failed joints listed.
- The fixed quote sets out the rooms, the products and the phasing.
- Old sealant is removed completely and the faces cleaned.
- Each joint is cleaned and left dry.
- A sanitary silicone bead is laid and given a smooth tooled finish.
- Each area is handed back when ready.
Preparing the site
- Have the specification and drawings to hand
- Agree which areas must stay open
- For older buildings, check the asbestos register before work
Get a fixed quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Related advice
Also in Tenston
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
FAQs: Tenston
Must every washroom in our Tenston building shut while you work?
Not all at once. We take one block of facilities at a time. We will tell you the curing time for the product before we start.
Can work at a site such as Heriot-Watt University - Orkney Campus fit around teaching?
Yes, holiday working periods are the norm on campus jobs. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Do you need to remove the old sealant?
The failed bead is always removed. Fresh silicone can’t key to an old bead, so sealing over it soon peels.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
What’s the quickest route to a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. The first step only needs photos and a postcode.
Do you work in Tenston?
Yes. We cover Tenston, and the simplest way to start is to ring 01277 525 020 or use the quote form.
Do you offer coloured sealant?
That depends on the product. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
Toilets, showers and kitchens around Tenston
Tenston is within about 1 mile of the coast, and coastal hotels, guest houses and holiday sites tend to fill up in the busy months. Showers and en suites in constant use are where silicone moulds and splits first, so we plan the work for quieter weeks where possible. Island jobs, Tenston among them, are planned around the ferry and the forecast. A room count and photographs of each washroom help us bring enough sealant and plan the days.
For a campus such as Heriot-Watt University - Orkney Campus (4.9 miles south of Tenston), showers in residences and washrooms in teaching blocks can be programmed around term dates.
Tenston is about 12 miles west of Kirkwall, in the Orkney Islands. We cover commercial sites throughout Tenston. Across the Orkney Islands, 51 places are covered, including Tenston.
If you need washroom sealing in KW16, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Sites close to Tenston are covered too, including Wasbister (1 mile south), Russland (2 miles north-east), Hourston (2 miles north-east), Skeabrae (3 miles north) and Harray (3 miles east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Local landmarks in Tenston
Well-known places in the area include Skara Brae Visitor Centre (2.8 miles north-west). The countryside around Tenston includes Mill Dam of Rango and Hill of Miffia.
How the quote is worked out
We price every job individually. The things that drive the figure:
- How much there is to seal
- The size and state of each joint
- Phasing around occupants
- Travel to remote or island sites
We don’t publish prices, since every building and every scope is different. Call for a quote.
What to include in your enquiry
Diagnosis starts before we arrive. Let us know:
- The postcode of the building
- Access details, including height
- The type of building and who uses it
- A wide shot and a close-up of the area
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. If you have questions first, speak to us on 01277 525 020 or email the details over.
Keeping the joints sound
Sealant joints are maintenance items, and how long they last depends on how they’re treated. We suggest:
- Report faulty extraction promptly
- Keep washrooms out of use until we say the sealant has cured
- Add sealant joints to planned maintenance checks
- Squeegee showers and trays after busy periods
Keep extract fans working and vents clear. Constant damp lets mould take hold even on anti-mould grades so report fans that aren’t working to your building services team.
A few failed joints can be resealed with hardly any disruption. Left, it tends to become a building-wide job with more phasing to plan.
General trades versus a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Redoing a failed joint usually costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.