Park Gate washroom sealing
We carry out sealing in commercial washrooms, showers, kitchens and wet areas in Park Gate. Send photographs or drawings for a fixed quote.
- Black mould inside silicone joints that cleaning can’t shift
- Users noticing mouldy joints
- A new bead over an old one coming away
Washroom sealing in Park Gate
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Washroom sealing for commercial buildings in Park Gate
Our washroom work covers offices, hotels, schools and colleges, leisure centres and gyms, clinics and care homes, plus the kitchens and tea points that go with them. Product and method follow how hard each area is used and cleaned. If you have split or peeling sealant at shower trays and failed joints along IPS and cubicle panels, we can help, whatever the surface. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Park Gate is the same: the right product in a properly prepared joint.
Rural businesses near smaller places such as Park Gate, from cafés to event venues, rely on washrooms and kitchens that stay clean. Tell us your opening times and quiet periods and we will plan around them.
Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Where
- Park Gate (SO31)
- Region
- Hampshire
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
What we are called out for in Park Gate
A lot of failed washroom sealant was laid over an old bead or a dirty surface. Silicone won’t adhere to a silicone bead, so it soon lets go.
Typical triggers for a call:
- Sealant stained black around basins and showers
- Gaps where vanity tops meet the wall
- Sealant lifting along a tray edge
- Sealant laid over old silicone and now peeling
For a hall at a building such as St Margaret Mary, resealing the kitchen and toilets can be fitted between bookings.
What to look for in a quote
- Will RAMS and insurance details be available?
- Is the sealant right for the movement and the substrate?
- How the existing material will be dealt with
- Do they follow the manufacturer’s priming guidance?
Cost factors for washrooms and wet areas
Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:
- How much existing material needs removing
- Travel to remote or island sites
- Joint width, depth and condition
- Specialist products, such as fire-rated or hygienic sealants
There’s no price list, since every building and every scope is different. Call for a quote.
Before you send an enquiry
Good information means a firmer quote. When you get in touch, include:
- Specification clauses that apply
- Clear photos of the problem areas
- Any dates the work must fit around
- Drawings or a marked-up plan, if available
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or call 01277 525 020 or email a schedule or drawings to discuss it first.
Different surfaces, different methods
Showers and trays
A tray that rocks or has cracked won’t be fixed by sealant, and we will say so before resealing.
Wet-room floors and floor-to-wall joints
Sealant at a wet-room floor edge is not a substitute for the waterproofing underneath and point it out if water appears to rise from below.
Commercial clients in Park Gate
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Keeping the joints sound
Problems stay small when the joints are checked regularly. In particular:
- Photograph and log failed joints across the estate
- Keep extract fans working and vents clear
- Clear standing water from shower floors where possible
- Include joints in routine washroom inspections
Where possible, have shower floors and trays squeegeed after busy periods. Joints that sit wet for hours fail sooner.
Leaks through tray and wet-floor joints can go unseen until a ceiling marks below. By then, other trades may be needed as well, so reseal when you first spot a split.
FAQs: Park Gate
Will our hotel in Park Gate need to close for the work?
Rarely. Rooms or floors are done in turn, so the rest of the hotel keeps trading. Housekeeping and our team agree each day’s rooms.
Is a hospital such as Fareham Community Hospital somewhere you can work?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
Do you take on small jobs?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
What happens if old sealant might contain asbestos?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
Do your applicators hold CSCS cards?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.
Do you work in hospitals, clinics and care homes?
We work in clinics, hospitals and care homes. Tell us what records you need and we will confirm with the quote before we start.
What will the job cost?
We don’t publish prices, as every site differs. Send photos or drawings and we’ll price it at a fixed figure.
How a job runs
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before any cutting starts, with the work itself normally taking between a morning and a week or so, set by the number of rooms and the phasing you need. For work around Park Gate, we aim to finish in one visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- Every room is surveyed and the failed joints listed.
- You get a fixed quote with the phasing plan.
- Old sealant is removed completely and the faces cleaned.
- Each joint is cleaned and left dry.
- New anti-mould sealant goes in and is tooled neat.
- Each area is handed back when ready.
Getting the site ready
- Point out parking and an unloading spot
- Share your working hours and any access restrictions
- Have the specification and drawings to hand
Getting a fixed quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, call the office on 01277 525 020 or send details through our quote form.
Advice
Places near Park Gate
Other services in Park Gate
Commercial washrooms in Park Gate
The sea is no more than about 3 miles from Park Gate, and places by the sea often rely on visitors, so their hotels and holiday lets see heavy seasonal use. Bathrooms turned round daily in the busy months need sound, cleanable joints, so we plan the work for quieter weeks where possible. A 2-mile radius around Park Gate takes in several hotels. Behind every hotel door there’s a bathroom whose sealant will need renewing sooner or later. We work a handful of rooms at a time, so the hotel keeps letting the rest.
For a school such as Park Gate Primary School, washroom and kitchen sealant can be renewed around term dates. Office toilets at parks like Park Gate Business Centre, less than half a mile north of Park Gate, take steady weekday use, and mouldy silicone soon shows.
Park Gate is about 3 miles south-east of Hedge End, in Hampshire. We cover Park Gate and the rest of Hampshire, with the same fixed quotes and 12-month guarantee as everywhere else. Across Hampshire, 723 places are covered, including Park Gate. We also cover Southampton, some 6 miles away.
Business premises anywhere in SO31 are within our area. Streets here include Station Road, Botley Road and Middle Road. We also cover Sarisbury (1 mile west), Locks Heath (1 mile south), Segensworth (1 mile east), Whiteley (1 mile north-east) and Swanwick (1 mile north-west). Further afield, our area takes in Winchester (13 miles north), Gosport (7 miles south-east), Havant (12 miles east), Eastleigh (7 miles north-west), Fareham (3 miles south-east) and Horndean (11 miles east).
Local landmarks in Park Gate
Around Park Gate, our work takes us to commercial buildings near Brookfield Community School and Language College. There’s a railway station in Park Gate itself: Swanwick station. Nearby you will also find Bursledon Brickworks Industrial Museum (1.4 miles north-west) and St Andrew's Castle (2.6 miles south-west). The countryside around Park Gate includes Swanwick Lakes.