Commercial washroom and wet-area sealing in Hythe, Hampshire
Our CSCS-carded applicators take on sealing in commercial washrooms, showers, kitchens and wet areas in Hythe and the surrounding area. Send details for a fixed quote.
- A new bead over an old one coming away
- Sealant lifting along a tray edge
- Urinal joints that look unhygienic
Need washroom sealing in Hythe?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle washroom sealing in Hythe
Accessible WCs, showers and changing areas have their own pinch points: shower trays, wet-room floor edges, basins and floor-to-wall junctions. Gaps in those places let water get under the floor or behind panels, so we look at them closely. We work on vanity units and basins, kitchens and tea points and showers, trays and wet room floors, and the usual reasons a site gets in touch are open joints at the base of cubicle panels and discoloured joints around urinals and WC pans. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Hythe is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Towns the size of Hythe have washrooms and wet areas in schools, care homes, offices, gyms and restaurants. Anti-mould sanitary silicone, laid on clean, dry joints, keeps them looking cared for and easy to clean.
Every job we finish is backed by a 12-month workmanship guarantee, in Hythe as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Hythe (SO45)
- Region
- Hampshire
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What we’re called out for in Hythe
Decorators’ caulk and general sealants sometimes end up where sanitary silicone belongs. They don’t stand up to constant water and they discolour and fail early.
Common reasons buildings call us in:
- Open joints at the base of cubicle panels
- Washrooms that look worn because of the sealant
- Urinal joints that look unhygienic
- Sealant laid over old silicone and now peeling
For a campus such as Southampton Solent University, 3.2 miles north of Hythe, showers in residences and washrooms in teaching blocks can be programmed around term dates.
Questions to ask before you book
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Health and safety accreditation such as CHAS
- How they handle RAMS and site documents
- Can the work be phased to keep areas open?
FAQs: Hythe
Must every washroom in our Hythe building shut while you work?
Typically only some of them, for a short time. We work in phases so other facilities stay open. Each area is handed back once the sealant has cured enough to use.
Will you plan work around the academic year at somewhere like Southampton Solent University?
Yes. We plan campus work around teaching, exams and residence turnarounds. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Is it OK to put new silicone on top of the old?
We strip every bit of the failed bead and wipe away the residue first. It’s the difference between a joint that lasts and one that peels.
What happens if old sealant might contain asbestos?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Are you fully insured?
Yes. We are fully insured, and the certificate can go with your quote.
Can one quote cover more than one building?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
Do you take on small jobs?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
Other services in Hythe
Commercial washrooms in Hythe
The sea is no more than about 1 mile from Hythe, and coastal places often have hotels, guest houses and holiday accommodation with busy seasons. Showers and en suites in constant use are where silicone moulds and splits first, so we plan the work for quieter weeks where possible.
Hotels such as Fountain Court Hotel (to the south-east of Hythe) have en suite bathrooms where tired silicone at the bath, tray and basin is replaced room by room. Units at estates like Hardley Industrial Estate, 1.4 miles south of Hythe, have welfare blocks whose showers and toilets see shift after shift.
Hythe is about 4 miles south of Southampton, in Hampshire. We cover Hythe and the rest of Hampshire, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Hythe is one of 723 places we cover in Hampshire for washrooms and wet areas.
Postcode districts covered here: SO45 for washrooms and wet areas. Buildings on High Street, Deerleap Close and Langdown Lawn are within our area for washrooms and wet areas. We also cover Dibden Purlieu (1 mile south-west), Dibden (1 mile west), Marchwood (3 miles north-west), The Hummicks (4 miles south-west) and Beaulieu (4 miles south-west). Nearby towns on our patch include Winchester (14 miles north), Gosport (12 miles east), Eastleigh (8 miles north), Fareham (9 miles east), Totton (6 miles north-west) and Chandler's Ford (9 miles north).
Landmarks near Hythe
Around Hythe, our work takes us to commercial buildings near Noadswood School, Testwood School and No.5 (The Lord Nelson Public House), among other places. The nearest railway station is Southampton Town Quay station, about 2.3 miles north of the centre. Well-known places in the area include Netley Castle (2.1 miles north-east) and Westquay (2.9 miles north). The countryside around Hythe includes Mercury Marshes.
Why it’s worth doing now in Hythe
Cleaning mouldy sealant only masks it, but the mould is rooted in the silicone and comes back. A full reseal deals with it and your cleaning team stops chasing it. In Hythe, as anywhere, the simplest time to fix a failed joint is before it leaks. After a leak, there’s drying, repairs and redecoration on top.
The price depends on how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote once you have the details.
Why us?
- One phone line for London, the South East and Scotland
- Health and safety: CHAS accredited
- Coloured sealants to suit the setting, where available
- Colours chosen to suit frames, cladding or finishes where possible
See what affects the cost or our accreditations and insurance.
What the job involves on each surface
Kitchens and tea points
In commercial kitchens, smooth, cleanable joints help keep the kitchen hygienic. Where food contact is possible, we use a hygienic, food-safe sealant.
Wet-room floors and floor-to-wall joints
Wet floors are common in accessible showers and changing rooms so the edges are checked carefully.
What affects the price in Hythe
A fixed quote reflects the actual work. It takes account of:
- Travel to remote or island sites
- Phasing around occupants
- Backing rod, priming and other preparation
- Induction, permit and paperwork requirements
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
Sending details for a quote
A few photographs plus some basic facts will normally do. Please tell us:
- Your programme or deadline
- Specification clauses that apply
- What the building is and how it’s used
- Photos of the joints, close up and from further back
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
For managing agents and facilities managers
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
Our process
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Town-centre premises in Hythe may have limited parking, so tell us what’s nearby. Industrial and business units usually have yard or car park space.
- We agree which washrooms close and when.
- Anything behind the joints that needs another trade is flagged.
- Old sealant is stripped and the faces prepared.
- We reseal with the grade suited to each area.
- We give you a reopening time for every room.
What we need from you
- Confirm the product named in the specification
- Make sure the joints can be reached
- Tell us which areas need to stay in use
Getting a fixed quote
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.