Washroom Sealing in Horseport
Our CSCS-carded applicators take on sealing in commercial washrooms, showers, kitchens and wet areas in Horseport. Send photographs or drawings for a fixed quote.
- Gaps where vanity tops meet the wall
- Discoloured joints around urinals and WC pans
- Stained or open joints at kitchen sinks and worktops
Washroom sealing across Horseport
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Washroom sealing in Horseport, done properly
In a commercial washroom, sealant is usually the first thing to wear out. Basin tops, urinal backs, panel joints and shower trays put it under water, chemicals and daily cleaning, and once mould grows into it, it can’t be scrubbed out. We strip it out and lay new anti-mould sanitary silicone. If you’re dealing with resealing that didn’t last because the old bead stayed and gaps where vanity tops meet the wall, we can help, on IPS panels and cubicles, vanity units and basins and showers, trays and wet room floors alike. Searching for sealant specialists in Horseport? We’ve been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
In and around smaller places like Horseport, washroom work is often in halls, pubs, primary schools, care homes and holiday accommodation. Mould gets into sealant in any washroom that doesn’t dry out, and once it’s in, the sealant is replaced.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application.
- Location
- Horseport (SP6)
- Region
- Hampshire
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Horseport: questions and answers
Is a hospital such as Fordingbridge Hospital somewhere you can work?
Yes. We work in healthcare settings as well as offices and schools. Each area is agreed with the ward or department and the estates team in advance.
Is Horseport too small for you to travel to?
No. Small places get the same service as large ones. London and every South East county are within our area. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
How much does the work cost?
We don’t publish prices, as every site differs. Send photographs or drawings and we’ll price it at a fixed figure.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
What about RAMS and site documents?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Can one quote cover more than one building?
Yes. Multi-site work and planned programmes are a core part of the service, planned site by site to suit how each building is used.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Nearby places to Horseport
What else we do in Horseport
Surface by surface
Kitchens and tea points
Kitchen joints need to be smooth and sealed so they can be cleaned properly. Where food contact is possible, we use a hygienic, food-safe sealant.
Healthcare and care settings
In healthcare, sealed joints are part of infection control. We work to your estates and infection-control requirements as well as site permits.
Toilets, showers and kitchens around Horseport
Schools such as Fordingbridge Infant School have toilets, changing rooms and kitchens that are best resealed in the holidays. Halls linked to places like St Mary's Church host groups all week, which is hard on kitchen and toilet sealant. For an occupier at a site such as Arch Farm Industrial Estate, 0.8 miles north-west of Horseport, the canteen and welfare facilities need cleanable joints as much as any office.
Horseport is in Hampshire. Across the SP6 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Our Hampshire coverage takes in 723 places, large and small. Our Southampton page has more on work in that area.
We cover the SP6 postcode districts. Among the streets we cover are Bridge Street, Southampton Road and Ringwood Road. Close to Horseport, our area also takes in Fordingbridge (1 mile north-west), Criddlestyle (1 mile east), Stuckton (1 mile south-east), Lower Burgate (1 mile north) and Tinkers Cross (1 mile north-west). Bigger towns within reach include Totton (12 miles east), Romsey (14 miles east), New Milton (13 miles south-east), Ringwood (6 miles south), Barton on Sea (14 miles south-east) and Marchwood (15 miles east).
Around Horseport
In Horseport, that means premises near The Burgate School and Sixth Form and The George Inn, among other places. A little further out are Fordingbridge Doll Museum (under half a mile west) and Godshill Castle Hill (1.6 miles north-east). Green spaces nearby include Blashford Lakes and Linbrook Lake.
What happens if it’s left?
Open or mouldy joints are hard to keep hygienic which matters most in healthcare, food and education settings. Sound, smooth joints are much easier to keep clean. For buildings around smaller places like Horseport, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Why clients in Horseport choose us
- Work carried out by CSCS-carded applicators
- Old sealant cut out, never sealed over
- Sealing commercial buildings since 2005
- Fully insured
Read what affects the cost and our accreditations.
When it isn’t the sealant
Honesty saves time and money. New sealant won’t cure:
- Failed tanking beneath a wet-room floor or behind tiles
- Hollow tiles or loose panels behind the joint
- Water from plumbing, not from a joint
If you’re not sure, just call 01277 525 020 or send photos by email and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Vanity units and basins
- Urinals and WCs
- Showers, trays and wet room floors
- IPS panels and cubicles
- Kitchens and tea points
- Accessible toilets and changing rooms
Our process
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. If others near Horseport need work, visits can be combined. A fixed quote is given before anything starts.
- First, the phasing is agreed so facilities stay open.
- Leaks, loose panels or damp are pointed out first.
- Failed sealant and residue are stripped out.
- The right sanitary or food-safe sealant is applied.
- We give you a reopening time for every room.
Before we start on site
- Confirm the product named in the specification
- For older buildings, check the asbestos register before work
- Make sure the joints can be reached
Quotes
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, call 01277 525 020 or use the quote form.
Read more
Should maintenance staff do it?
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
After the work
After handover, these steps help:
- Clean sealant with gentle products and a soft cloth
- Report split joints at trays and basins early
- Include joints in routine washroom inspections
- Clear standing water from shower floors where possible
Ask your cleaning team to use gentle products and soft cloths on sealant. Aggressive descalers, solvents and scouring pads shorten its life and give mould a start.
A few failed joints can be resealed with hardly any disruption. Left, it tends to become a building-wide job with more phasing to plan.