
Dunnet washroom sealing
Need washroom sealing in Dunnet? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Discoloured joints around urinals and WC pans
- Stained or open joints at kitchen sinks and worktops
- Shower tray joints that have opened up
Washroom sealing for Dunnet sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Washroom sealing in Dunnet, done properly
From one staff toilet in Dunnet to washrooms across a whole estate, we work the same way: details first, then a fixed quote, then the work, then the 12-month guarantee. A few photos and a count of fittings are enough for a quick quote, or we can arrange a visit. We work on kitchens and tea points, IPS panels and cubicles and accessible toilets and changing rooms, and what we’re called in for most is sealant laid over old silicone and now peeling and stained sealant around pans and urinals. For commercial sealant work in Dunnet, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Travel to smaller places like Dunnet is planned so the work is finished on one visit. Send photographs and a room list and we’ll give a fixed quote.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.

- Location
- Dunnet (KW14)
- Wider area
- Highland
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
General trades versus a specialist
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Sanitary sealant for Dunnet buildings
Dunnet lies within about 1 mile of the sea, and coastal hotels, guest houses and holiday sites tend to fill up in the busy months. Washrooms used guest after guest wear their sanitary silicone faster, so we plan the work for quieter weeks where possible. Dunnet is on Scotland’s drier eastern side. Even so, a washroom that doesn’t dry out between uses will see mould get into its sealant.
Where you’re responsible for a hall attached to a building such as Dunnet Church, its kitchen and toilets need sealant that stays cleanable.
Dunnet is about 7 miles east of Thurso, in Highland. Looking for washroom sealing in Dunnet? We can help, as we do across Highland. We work across 256 places in Highland.
Postcode districts covered here: KW14. Nearby places we also cover include Brough (2 miles north), Castletown (3 miles south-west), Scarfskerry (3 miles north-east), Rattar (3 miles north-east) and Murkle (4 miles south-west) for washrooms and wet areas. For island and remote sites, we plan travel and materials carefully, so include the location in your enquiry.
Around Dunnet
Nearby you will also find Westside Croft (0.5 miles north-west) and Castle of Mey (4.5 miles east). Green spaces nearby include St John's Loch.
What affects the price in Dunnet
Your fixed quote is built from the real scope. It allows for:
- Specialist products, such as fire-rated or hygienic sealants
- The site’s rules and procedures
- How accessible the joints are
- Removal of failed or old sealant
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote.
Before you send an enquiry
Whether it’s one area or a whole building, the same details help:
- Specification clauses that apply
- A wide shot and a close-up of the area
- Access details, including height
- Whether the building will be occupied during the work
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. For smaller jobs, photos and a description will do.
Looking after the joints
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. We suggest:
- Act on the first split you see at a shower tray
- Report faulty extraction promptly
- Share your site rules when you send details
- Respect the cure time before reopening each room
Keep extract fans working and vents clear. Constant damp lets mould take hold even on anti-mould grades, so get faulty extract looked at.
In food areas, cleanability is something environmental health officers look at. Failed sealant around sinks and worktops is easy to put right in good time.
Signs you need washroom sealing in Dunnet
Commercial cleaning is harder on sealant than everyday use. Strong chemicals, scourers and jet washing roughen, discolour or lift a bead, and dirt and mould then get a foothold.
Things that normally lead to an enquiry:
- Sealant stained black around basins and showers
- Sealant lifting along a tray edge
- Resealing that didn’t last because the old bead stayed
- Failed sealant in a tea point or staff kitchen
At a hotel such as Northern Sands Hotel, less than half a mile south-west of Dunnet, the quieter weeks are the time to reseal bathrooms.
Comparing quotes
- Is the sealant right for the movement and the substrate?
- How the existing material will be dealt with
- Do they follow the manufacturer’s priming guidance?
- How joint depth will be controlled
Also near Dunnet
What else we do in Dunnet
Why it’s worth doing now in Dunnet
Gaps and mould in joints give dirt and bacteria somewhere to sit, and in kitchens, clinics and schools that is a real concern. A smooth, sealed joint can be cleaned properly. Renewing every failing joint on one visit is the sensible approach for a place like Dunnet. Photos of each area help us quote the whole job.
The product called for affects the cost, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why us?
- Coloured sealants to suit the setting, where available
- Clear, fixed quotes
- Workmanship guaranteed for 12 months
- Failed material removed, not covered up
Take a look at what affects the cost or our accreditations.
From enquiry to sign-off
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. For a building near Dunnet, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- Every room is surveyed and the failed joints listed.
- You get a fixed quote with the phasing plan.
- The whole of the old bead is removed.
- Each joint is cleaned and left dry.
- New anti-mould sealant goes in and is tooled neat.
- Each area is handed back when ready.
Before we start on site
- Confirm the product named in the specification
- Let building users know which areas are affected
- Explain the parking and delivery arrangements
Request a quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Advice
Dunnet: questions and answers
Is a smaller place like Dunnet outside your area?
No. Small places get the same service as large ones. We work across every Scottish council area. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
What site paperwork comes with a job in Dunnet?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.
How long does a job like this take?
It depends on the scope, but the work normally takes a morning or so for a small washroom, longer where showers and changing rooms are included. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Who decides which product is used?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Can washrooms stay open while you work?
Only the area we’re working in is closed. Rooms go back into use once the sealant has cured, then we move on.
Are you CHAS accredited?
Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
When can showers be used after new sealant?
Cure times vary by product and temperature. Each room gets its own reopening time from us before we leave it.