Washroom Sealing contractors in Borestone
Our CSCS-carded applicators take on sealing in commercial washrooms, showers, kitchens and wet areas in Borestone. Send photographs or drawings for a fixed quote.
- Stained or open joints at kitchen sinks and worktops
- Users noticing mouldy joints
- Failed sealant behind washroom basins
Washroom sealing in Borestone
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
On site: what to expect
We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and your contact hears from us before we move to the next area. For a building near Borestone, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- Every room is surveyed and the failed joints listed.
- The fixed quote sets out the rooms, the products and the phasing.
- Old sealant is removed completely and the faces cleaned.
- Each joint is cleaned and left dry.
- New anti-mould sealant goes in and is tooled neat.
- Rooms reopen after the cure time.
What we need from you
- Make sure the joints can be reached
- Have the specification and drawings to hand
- Tell us your opening times and when work is allowed
Getting a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call 01277 525 020 or use the quote form with what you know.
Related advice
Washroom sealing for commercial buildings in Borestone
Facilities managers, contractors and building owners have used us for washroom sealing for over 20 years. Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We are fully insured. Every resealed washroom carries our 12-month guarantee. The enquiries we see most involve sealant laid over old silicone and now peeling and gaps where vanity tops meet the wall, across urinals and WCs, IPS panels and cubicles and kitchens and tea points. Facilities teams, main contractors and managing agents in Borestone tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
For washroom work around Borestone, we plan so every room on the list is done in one trip where possible. Photos of each washroom and a count of rooms help us quote and plan.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Place
- Borestone (FK7)
- Region
- Stirling
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
What happens if it’s left?
Gaps and mould in joints give dirt and bacteria somewhere to sit which matters most in healthcare, food and education settings. A smooth, sealed joint can be cleaned properly. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Borestone, a repair visit takes planning, so it’s better to act early.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why clients in Borestone choose us
- 12-month guarantee on workmanship
- Products installed to the manufacturer’s instructions
- Our applicators hold CSCS cards
- Health and safety: CHAS accredited
FAQs: Borestone
Would you work within a site like BMI Kings Park Hospital?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
Can you work around term dates at a campus such as University of Stirling?
Yes. Education sites normally want the work in vacations or in phases during term, and we plan to suit. Let us know which documents your site asks for, and we will confirm them alongside the quote.
Is colour matching possible?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
What do you charge?
Each job is quoted on its own details. For yours, call 01277 525 020 or email a schedule or drawings.
Do you need to remove the old sealant?
The whole of the old bead is removed and the surfaces cleaned first. It’s the difference between a joint that lasts and one that peels.
Can one quote cover more than one building?
Yes. Several buildings can share a single quote, with one point of contact.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
Keeping Borestone washrooms open while we work
The area within 2 miles of Borestone holds a number of hotels. Hotel en suites take daily use, and tired silicone at trays and basins is one of the first things guests notice. Rooms are done in turn so most stay available. Borestone is in the east of Scotland, which is drier than the west. Inside, ventilation and use decide how fast washroom sealant moulds, whatever the weather.
For a site such as BMI Kings Park Hospital, which lies north of Borestone, sanitary joints in clinical areas need sound, cleanable sealant and a careful method. At a university such as University of Stirling, which lies north of Borestone, summer is the usual window for resealing residence bathrooms.
Borestone is about 2 miles south of St. Ninians, in Stirling. We cover Borestone and the rest of Stirling, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 52 places in Stirling, large and small. Glasgow is covered too, around 20 miles from Borestone.
Postcode districts covered here: FK7 for washrooms and wet areas. Buildings on New Line Road and Chartershall Road are within our area for washrooms and wet areas. We also cover Chartershall (1 mile north), Broomridge (1 mile north-east), Bannockburn (1 mile north-east), Dunipace (4 miles south) and Fankerton (4 miles south) for washrooms and wet areas. A short drive away, we cover Stirling (3 miles north), Dunblane (8 miles north), Raploch (3 miles north), Cornton (4 miles north), Bridge of Allan (5 miles north) and Riverside (3 miles north).
Local landmarks in Borestone
The closest station to Borestone is Stirling station, about 2.7 miles north. Other landmarks nearby include Thistles Centre (2.6 miles north) and Stirling Castle (3 miles north). For a walk, there’s Gillies Hill and Airthrey Loch.
Towns and villages near Borestone
More services for Borestone
When it isn’t the sealant
Some faults sit outside our scope, and we point that out rather than sealing over them:
- A room that stays damp because ventilation isn’t working
- Failed tanking beneath a wet-room floor or behind tiles
- Fittings that move too much to hold a bead
If you’re not sure, just call 01277 525 020 or email the details over and we’ll give you a straight answer.
Joints and surfaces we work on
- Accessible toilets and changing rooms
- Showers, trays and wet room floors
- Urinals and WCs
- Kitchens and tea points
- Vanity units and basins
- IPS panels and cubicles
How the job changes by surface
Urinals and WC pans
Floor joints around WC pans are often forgotten. They are checked with everything else.
Showers and trays
If a tray moves too much or is cracked, it needs attention first, and we will say so before resealing.
Common problems we fix in Borestone
Washrooms are warm, damp and full of organic residue, and silicone joints hold onto all three. Anti-mould additives help, but in a poorly ventilated room mould can still take hold eventually.
If one of these sounds familiar, it’s time for a closer look:
- Discoloured joints around urinals and WC pans
- Resealing that didn’t last because the old bead stayed
- Stained or open joints at kitchen sinks and worktops
- Sealant lifting along a tray edge
Toilets at places like Thistles Centre (to the north of Borestone) are cleaned constantly, so silicone needs to be sound and smooth.
What your quote should include
- How the joint faces will be prepared and primed
- Are they CHAS accredited or on Constructionline?
- The named product and why it was chosen
- Their public liability cover
Looking after the joints
Your facilities or cleaning team can help the joints last. Share these points with them:
- Act on the first split you see at a shower tray
- Keep extract fans working and vents clear
- Tell us about infection-control or permit rules before we quote
- Note failing joints building by building
Where possible, have shower floors and trays squeegeed after busy periods. Standing water on a joint all day shortens its life.
Mould in a joint spreads along the bead and into nearby grout and users notice. Replacing it early keeps the job to a reseal.