Washroom Sealing in Boarhunt
Sealant work in Boarhunt for main contractors, managing agents and facilities managers: sealing in commercial washrooms, showers, kitchens and wet areas, quoted at a fixed price.
- Shower tray joints that have opened up
- Sealant laid over old silicone and now peeling
- Gaps where vanity tops meet the wall
Washroom sealing across Boarhunt
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Washroom sealing around Boarhunt: points for this area
Boarhunt lies within about 2 miles of the sea, and coastal places often have hotels, guest houses and holiday accommodation with busy seasons. Bathrooms turned round daily in the busy months need sound, cleanable joints, so resealing in the quieter months keeps rooms ready. Several hotels sit less than 2 miles from Boarhunt. Hotel en suites take daily use, and tired silicone at trays and basins is one of the first things guests notice. The work can go floor by floor, agreed with housekeeping.
At a school such as Cams Hill School, changing rooms and kitchens need cleanable joints as much as the toilets. Where you’re responsible for a hall attached to a building such as Church of St Nicholas, its kitchen and toilets need sealant that stays cleanable.
Boarhunt is about 3 miles north-east of Fareham, in Hampshire. If you’re looking for washroom sealing in Boarhunt, we can help. 723 places across Hampshire fall within our area, Boarhunt among them.
Work on washrooms and wet areas is covered throughout PO17, whatever the building. We also cover Southwick (1 mile east), North Fareham (1 mile west), Wallington (2 miles south-west), North Boarhunt (2 miles north) and Fareham Common (2 miles south-west). Nearby towns on our patch include Winchester (15 miles north-west), Gosport (5 miles south), Havant (7 miles east), Eastleigh (11 miles north-west), Fareham (3 miles south-west) and Horndean (6 miles north-east).
Around Boarhunt
Boarhunt’s nearest station is Portchester station, about 1.6 miles south-east of the centre. A little further out are Fareham Shopping Centre (2 miles south-west) and Portchester Castle (2.5 miles south-east). Green spaces nearby include Portsdown Hill and St Clair's Meadow.
About our washroom sealing in Boarhunt
In a busy washroom, the sealant normally gives up long before the tiles or fittings. Around basins, urinals, cubicles, IPS panels and shower trays it takes water, soap, cleaning chemicals and knocks every day and mould that roots into it can’t be cleaned away. The fix is to remove it completely and reseal with sanitary silicone containing anti-mould additives. We work on kitchens and tea points, vanity units and basins and urinals and WCs, and the usual reasons a site gets in touch are urinal joints that look unhygienic and sealant stained black around basins and showers. Searching for sealant specialists in Boarhunt? We have been sealing commercial buildings since 2005, with CSCS-carded applicators.
Community buildings around smaller places like Boarhunt have kitchens and toilets used by many people. Fresh anti-mould sanitary silicone at sinks, worktops and toilets keeps them cleanable.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Place
- Boarhunt (PO17)
- Wider area
- Hampshire
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Places near Boarhunt
More services for Boarhunt
What we’re called out for in Boarhunt
Commercial cleaning is harder on sealant than everyday use. Strong chemicals, scourers and jet washing roughen, discolour or lift a bead, and dirt and mould then get a foothold.
If one of these sounds familiar, it’s time for a closer look:
- A new bead over an old one coming away
- Open joints along basins and vanity units
- Panel joints letting water behind
- Sealant stained black around basins and showers
For an occupier at a site such as Spurlings Industrial Estate (1.1 miles south-west of Boarhunt), the canteen and welfare facilities need cleanable joints as much as any office.
What your quote should include
- What site paperwork they can supply
- Their plan for phasing and protecting the area
- The named product and why it was chosen
- Their public liability cover
Owners, agents and contractors
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Boarhunt can form part of a wider programme.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
Leave it or put it right?
Leaving the job until a shutdown often means living with it for months. With phasing, the work can go ahead while most facilities stay open. For buildings around smaller places like Boarhunt, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Why clients in Boarhunt choose us
- Specification-led, product-correct work
- Joints cleaned back to sound surfaces
- Standard and matched colours in many product ranges
- Fully insured, including public liability cover
Read how commercial sealant jobs are priced and how we’re accredited.
Should maintenance staff do it?
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Questions about Boarhunt
Will you plan work around the academic year at somewhere like Fareham College?
Yes. We plan campus work around teaching, exams and residence turnarounds. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Does a hotel in Boarhunt need to shut while its sealant is renewed?
Rarely, if ever. We take a few rooms out at a time. The plan is built around your bookings.
Is there a guarantee on the work?
Every job carries our 12-month guarantee. It applies to our workmanship, not to plumbing leaks or damp from poor ventilation.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
Who decides which product is used?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
What do you charge?
There isn’t a price list, because every site is different. With photographs or drawings, we can give you a fixed quote.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
Aftercare for building managers
For the best life from the joints:
- Add sealant joints to planned maintenance checks
- Don’t leave trays and floors sitting wet
- Keep extract fans working and vents clear
- Avoid scourers and harsh descalers on silicone
Where possible, have shower floors and trays squeegeed after busy periods. Standing water on a joint all day shortens its life.
Inspectors look at whether kitchen surfaces can be kept clean. Resealing sinks, worktops and splashbacks before an inspection is a simple step.
From enquiry to sign-off
Site rules come first: sign-in, induction and whatever permit system the building uses. Once we are cleared to begin, we take the joints in the sequence agreed with you, and each area is checked before we leave it. If others near Boarhunt need work, visits can be combined. You will have a fixed quote before work starts.
- Every washroom is checked joint by joint, with loose panels, leaks or damp noted for the right trade.
- A phasing plan keeps part of the building’s facilities in use at all times.
- We strip out the old bead and clean off the residue left behind.
- We clean and dry every surface so the new sealant can grip.
- New sanitary silicone with anti-mould additives goes in and is tooled neat.
- Rooms reopen after the product’s cure time, and we move to the next.
Preparing the site
- Tell us which areas need to stay in use
- Let us know about inductions and permits
- Confirm the product named in the specification
Get a fixed quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.