Thurrock · England
Commercial sealant contractors in RM15
We cover every part of the RM15 postcode district, including South Ockendon and Aveley. Failed sealant is always cut out completely, with a 12-month guarantee.
Mastic and sealant across RM15
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Where we work in RM15
What we do in RM15
- Construction and new-build mastic
- Commercial washroom and wet-area sealing
- Facade and window perimeter sealing
- Industrial and floor joint sealing
- Fire-rated sealing and fire stopping
- Mastic sealing for building owners and managing agents
- Coloured and colour-matched sealant
- Expansion and movement joint sealing
- Commercial sealant contractors
- Every service
Tell us what needs doing and your postcode and we’ll come back with a price: ring 01277 525 020 or email us.
Neighbouring districts
Elsewhere in Thurrock
Every town in Thurrock
Areas we cover
Commercial sealant contractors in RM15: how it works
Most of the buildings we seal stay open while we’re there. Work is scheduled around the site hours and access windows you give us. It’s the same approach in offices, retail units, hotels, schools and healthcare buildings. Site teams most often ask us about shrunken sealant along kitchen worktops and splashbacks and movement joints packed with grit and debris, on floor and threshold joints, external facade joints and window and door perimeters.
At the end of each section, the masking comes off, the area is cleaned and every joint is checked. If an area should be left alone while the sealant cures, we say how long and put signs out.
- First, details come to us: photos, drawings or a schedule of the areas, and a site visit is booked where it helps.
- Next comes a diagnosis and a fixed quote.
- Site hours, access windows and the order of areas are agreed before we start.
- We strip the failed bead and prepare both faces of the joint.
- We fit backing to the right depth, prime where specified and lay the new bead.
- Finished joints are checked with you and handed over with our 12-month guarantee.
What you will pay
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Why choose Mastic Doctor
- Standard and matched colours in many product ranges
- Colours confirmed for the specified product
- Work to your specification and the manufacturer’s guidance
- Public liability insurance in place
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or use the quote form.
What’s near South Ockendon
Locally, jobs take us to sites close to Belhus, Bonnygate Primary School and Royal Oak Inn. You will also find Church of St Nicholas (0.6 miles north-east) and Beacon Hill Academy (0.5 miles west). There’s a railway station in South Ockendon itself: Ockendon station. Nearby you will also find Thameside Centre (2.9 miles south-east) and Thurrock Community Hospital (2.4 miles south-east). Not far away are Chafford Gorges Nature Park.
Where commercial joints are in RM15
Commercial buildings across RM15 range from older premises altered many times to recent units on business parks. Surfaces decide the sealant, from masonry to powder-coated frames and shop-fit panels.
We work across Greater London and the South East counties, and every job in RM15 starts with access, parking and site rules.
South Ockendon: If you have premises on more than one site, say at Lakeside Shopping Centre and Lakeside Retail Park, one contractor and one quote can cover both. In a retail centre such as Ealing Broadway Centre, 0.6 miles to the south-east of South Ockendon, new tenants mean new shop fits, and the sealant at counters, frontages and floor edges is part of the finish.
Why deal with it now?
Fixing joints complaint by complaint is a costly way to manage sealant. Planning the work across a year or a portfolio means fewer separate visits and a predictable spend. We can help you prioritise, starting with the joints most likely to let water in.
What your quote should include
- The terms of the workmanship guarantee
- Whether primer will be used where the manufacturer specifies it
- How joint depth will be controlled
- How the existing material will be dealt with
What sets the cost
Each job is priced on its own details. The things that drive the figure:
- Site requirements such as inductions and permits
- Location, for remote and island sites
- How much existing material needs removing
- Which sealant the job calls for
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote.
Sending details for a quote
There’s no need for a formal survey. These details are enough to start:
- Photos of the joints, close up and from further back
- The type of building and who uses it
- The product your specification calls for
- Where the site is, with the postcode
For a fixed quote, ring 01277 525 020 or email a schedule or drawings with the site address and an outline of the work. Our quote form is another easy route.
After the work
Problems stay small when the joints are checked regularly. Specifically:
- Look at the sealant around anything that has been moved or replaced
- Keep washroom and kitchen extraction working
- Put external and wet-area joints on a regular inspection round
- Act on the first lifting edges rather than waiting
Give fresh sealant time to cure before it’s cleaned, wetted or walked past. Cure time varies with the product, conditions and depth of the joint. Keeping signs or barriers up until then protects the finish.
An open joint in a food area or toilet collects dirt and moisture that cleaning can’t reach. Cleanability is something environmental health officers pay attention to.
Owners, agents and contractors
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first.
Site staff or a sealant specialist?
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Your questions answered
How long does a job like this take?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
Do you check for asbestos before removing sealant?
On older buildings, our first request is the asbestos survey. Managing asbestos is the dutyholder’s responsibility and removing it isn’t something we do.
Will the building have to shut during the work?
Most of the buildings we work in stay occupied. Only the area being sealed is closed, and the sequence is agreed in advance, until its cure time has passed.
Do you work directly for building managers?
Yes. FMs, managing agents and landlords are among our regular clients. We can work to your instruction process and site rules.
What site paperwork can you provide?
We’ll confirm the paperwork you need, such as RAMS, an insurance certificate or CSCS details, with the quote. We’re CHAS accredited and a Constructionline member, with five million pounds of public liability insurance.
Can you work to our specification?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Are your applicators CSCS-carded?
Yes. Our applicators hold CSCS cards, which many sites require.