Surrey · England
Commercial sealant contractors in RH3
Our applicators cover all of the RH3 postcode district, which takes in Brockham, Betchworth and Strood Green. Failed sealant is always cut out completely, with a 12-month guarantee.
Need sealant work in RH3?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Places in RH3
Our services across RH3
- Construction and new-build mastic
- Fire-rated sealing and fire stopping
- Commercial washroom and wet-area sealing
- Commercial sealant contractors
- Mastic sealing for building owners and managing agents
- Industrial and floor joint sealing
- Facade and window perimeter sealing
- Coloured and colour-matched sealant
- Expansion and movement joint sealing
- Every service
Let us know the job and your postcode and we’ll come back with a price: speak to us on 01277 525 020 or send details through our quote form.
Neighbouring districts
Elsewhere in Surrey
All places in Surrey
Areas we cover
About commercial sealant contractors in RH3
Inside a commercial building, sealant does a lot of quiet work: around sanitaryware, along worktops and splashbacks, at window boards, partition heads and floor junctions. Outside, it closes facade joints, frame perimeters and movement joints against the weather. We deal with internal and external sealant joints alike. The enquiries we see most involve messy, uneven beads from earlier work that let the building down and window and door perimeter joints that have cracked open, across floor and threshold joints, movement joints in walls and floors and washrooms and tea points.
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly.
- We start with the evidence: photos, drawings or a look on site.
- You get a fixed quote covering removal, preparation and the new sealant.
- We agree the order of work, access windows and site hours with you.
- The failed sealant comes out and the faces are prepared, with primer where required.
- Backing goes in, the new sealant is laid and tooled, and the area is left neat.
- Completed areas are signed off with you under our 12-month guarantee.
What affects the price in RH3
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Why appoint us
- Work carried out by CSCS-carded applicators
- A Constructionline member, so easy to vet
- Sealing commercial buildings since 2005
- 12 months’ guarantee on every job
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to phone 01277 525 020 or use the quote form with what you know.
Local landmarks in Brockham
Recent enquiries here include premises near North Downs Primary School, Inn on The Green and The Ashcombe School, among other places. Other local landmarks include Christ Church (less than half a mile south-west), Pippbrook House (1.9 miles west) and Brockham Limeworks (0.9 miles north). The nearest railway station is Betchworth station, about 1.1 miles north-east. Nearby you will also find Reigate Priory Museum (3.3 miles east) and Headley Court (3.9 miles north). Green spaces nearby include Reigate Heath and Box Hill.
Commercial sealant contractors across RH3: the area picture
From Brockham, Betchworth and Strood Green outwards, RH3 has a broad spread of commercial premises: shops, offices, hotels, restaurants and units. We cover the whole area, so occupiers with several sites can use one contractor and one point of contact, with colours matched site to site where the brand needs it.
The South East is one of the UK’s drier regions, though outside work in RH3 still waits for dry faces, and cold mornings bring frost and condensation on steel and glass.
Brockham: For premises near Betchworth station, 1.1 miles north-east of Brockham, footfall is part of the plan: work is phased so shops and offices keep trading. If you have premises on more than one site, say at Chesterfield Business Park and Glebelands Centre Business Park, one contractor and one quote can cover both.
What sets the cost
Your fixed quote is built from the real scope. It allows for:
- Induction, permit and paperwork requirements
- Joint width, depth and condition
- Location, for remote and island sites
- The total length or number of joints
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What we need to price the job
It doesn’t need to be a full survey. A few details are enough to get going:
- The type of building and who uses it
- Specification clauses that apply
- Clear photos of the problem areas
- Asbestos survey details if the building is older
For a fixed quote, speak to us on 01277 525 020 or email a schedule or drawings, telling us the site location and the nature of the job. You can also send details through our quote form.
General trades versus a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
How the job changes by surface
Facade and cladding joints
Facade joints move every day as panels warm and cool. They need a sealant with the right movement capability, laid at the right depth. We confirm the access in place before we quote.
Commercial kitchens and tea points
Kitchen joints along worktops, sinks, splashbacks and wall cladding collect grease and moisture. Proper degreasing comes before any new sealant.
What we’re called out for in RH3
No sealant joint is permanent. How long one lasts depends on the movement it takes, its exposure to sun and weather, the cleaning regime, the traffic and the product itself. On a busy commercial site several of those pile up at once.
Things that typically lead to an enquiry:
- Movement joints packed with grit and debris
- Untidy joints in a reception, shop floor or lobby
- Frame mastic that has hardened and come away from the wall
- Water staining near frames, panels or ceilings
Looking after the joints
Cleaning and maintenance staff play a part too. Share these points with them:
- Check joints after other trades have worked nearby
- Act on the first lifting edges rather than waiting
- Log reseals in the O&M or maintenance records
- Add sealant to the planned maintenance inspection list
Put sealant on the planned maintenance checklist. A periodic look catches splits and lifting edges early. If anything looks wrong, call 01277 525 020 or use the quote form with a photo.
Sealant installed at the same time normally fails in sequence. The first failures are often a warning about the rest. We will tell you which sealant joints need doing first and which can wait.
Your questions answered
How long will the new sealant last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
How is commercial sealant work priced?
Start with whatever information is to hand. Questions or a site visit follow where needed, then a fixed quote.
What guarantee do you give on resealing?
The work is guaranteed for 12 months. Should a joint we sealed give trouble during those 12 months, let us know and we’ll look at it.
Which site documents can you send us?
Send your site requirements with the enquiry. From you, we’ll need the asbestos information for older buildings and any site rules.
When can the area be used after sealing?
We will confirm how long the chosen product needs to cure.
Do you work directly for building managers?
Yes. FMs, managing agents and landlords are among our regular clients. We can work to your instruction process and site rules.
Is the old sealant taken out first?
The old bead is stripped out first. After that come cleaning, primer where needed, backing and the new sealant.