Surrey · England
Commercial sealant contractors in KT20
Our applicators cover all of the KT20 postcode district, including Tadworth, Kingswood and Lower Kingswood. Every joint is properly prepared, with a 12-month guarantee.
Mastic and sealant across KT20
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Places in KT20
- Tadworth
- Kingswood
- Lower Kingswood
- Walton on the Hill
- Burgh Heath
- Box Hill
- Margery
- Mogador
- Great Burgh
- Tattenham Corner
Our services across KT20
- Industrial and floor joint sealing
- Construction and new-build mastic
- Commercial sealant contractors
- Mastic sealing for building owners and managing agents
- Commercial washroom and wet-area sealing
- Fire-rated sealing and fire stopping
- Expansion and movement joint sealing
- Facade and window perimeter sealing
- Coloured and colour-matched sealant
- All services
Tell us what needs doing and your postcode for a fixed quote: speak to us on 01277 525 020 or email a schedule or drawings.
Postcodes nearby
More in Surrey
Every town in Surrey
Every area we cover
Our commercial sealant contractors service in KT20
We’ve applied sealant on commercial sites for over 20 years: CHAS accredited, Constructionline member, five million pounds of public liability insurance and CSCS-carded applicators. If your site needs RAMS, an insurance certificate or CSCS details, say so and we’ll confirm with the quote. Most enquiries involve earlier reseals applied straight onto the failed bead and external beads that have gone brittle and cracked, on external facade joints, movement joints in walls and floors and floor and threshold joints.
Site rules come first: signing in, inductions and any permit to work. With the paperwork done, the joints are worked through in the order agreed with your site contact.
- First, details come to us: photos, drawings or a schedule of the areas, or we arrange a site visit.
- Next comes a diagnosis and a fixed quote.
- We plan around your site hours and access windows, phasing the work where areas have to stay in use.
- We strip the failed bead and prepare both faces of the joint.
- The depth is set, primer is used where the maker calls for it, and the fresh bead is applied and tooled.
- Finished joints are checked with you and handed over with our 12-month guarantee.
Pricing in KT20
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote once you have the details.
Why clients in KT20 choose us
- Clear, fixed quotes
- Specification-led, product-correct work
- Public liability insurance in place
- One contact handling all your sites
Request a quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. For a chat about it beforehand, call 01277 525 020 or email the details over.
Around Tadworth
Recent enquiries here include premises near Merland Rise Recreational Ground, Tadworth Primary School and Church of the Good Shepherd, among other places. You will also find Chinthurst School (0.7 miles south), Inn on the Green (0.5 miles south-east) and The Beacon School (1.4 miles north-east). Tadworth’s nearest station is Tadworth station, roughly 0.5 miles south-west of the centre. Other landmarks nearby include The Ashley Centre (2.9 miles north-west) and Headley Court (2 miles west). Not far away are Colley Hill and Cuddington Meadows.
Shops, offices and hotels in KT20
The commercial stock in KT20 mixes older town-centre buildings with newer offices and units, in places such as Tadworth, Great Burgh and Kingswood and beyond. Each building needs the right product for its surfaces, from stone and brick to coated aluminium and laminate.
London and the South East are among the drier parts of the UK, but external sealing in KT20 still needs a dry joint and the right temperature, and damp or frosty mornings can hold it up.
Tadworth: In a retail centre such as The Ashley Centre, which lies north-west of Tadworth, new tenants mean new shop fits, and the sealant at counters, frontages and floor edges is part of the finish. Offices and shops close to stations such as Tadworth station, 0.5 miles to the south-west of Tadworth, tend to be busy all day, so sealant work is planned around opening hours.
Looking after the joints
A few simple habits keep the new joints working:
- Respect the cure time before reopening an area
- Check joints after other trades have worked nearby
- Deal with small splits before they become leaks
- Keep a record of which joints were resealed and when
Give fresh sealant time to cure before it’s cleaned, wetted or walked past. Cure time varies with the product, conditions and depth of the joint, so we confirm it for each area at handover. Leaving the area closed until then keeps the bead neat.
Sealant installed at the same time normally fails in sequence. A few splits this year typically mean more next year, so it makes sense to look at the wider elevation or block. We will tell you which sealant joints need doing first and which can wait.
Different surfaces, different methods
Commercial kitchens and tea points
In kitchens, sealant lines at worktops, sinks and wall panels take heat, grease and daily cleaning. They’re degreased thoroughly before resealing, and a hygienic or food-safe sealant is used where food contact is possible.
Fire-rated seals where specified
Where the specification calls for fire-rated or intumescent sealant around service penetrations or linear gaps, we install it to the product’s tested detail. The design and sign-off of fire stopping belong to the designer and building control; we install what’s specified.
What sealant work can’t fix
We check first that sealant really is the fix. It isn’t the answer for:
- Walls or slabs moving more than any sealant can take
- Broken glass or blown double-glazed units
- Leaks from pipework, wastes or valves (that’s plumbing)
How the quote is worked out
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- Induction, permit and paperwork requirements
- Quantities, in metres or numbers
- Any access equipment needed
- Removal of failed or old sealant
The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
What to include in your enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- Approximate linear metres or a joint schedule
- The postcode of the building
- Whether the building will be occupied during the work
- Specification clauses that apply
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.
Signs you need commercial sealant contractors
Washrooms and kitchens wear sealant out in their own way. Constant moisture, cleaning chemicals and weak extraction let mould grow into the sealant; when mould is in the body of the sealant, no cleaner will shift it. Replacement with a sanitary anti-mould silicone is the lasting answer.
What tends to prompt an enquiry:
- Weathered facade sealant that no longer flexes
- Leaks that seem to come through a sealant line
- Frame sealant that has cracked, shrunk or pulled away
- Wall and floor joints that have lost their seal
Questions about KT20
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
Can you work to our specification?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Can one contractor look after sealant on all our buildings?
Yes, we can. Send a list of addresses and what’s needed at each, and we’ll put together a fixed quote and a sensible order of work.
Will your applicators have CSCS cards?
Yes. Our applicators hold CSCS cards, which many sites require.
How do we get a quote?
Send photographs, drawings or a list of locations. If a visit is needed we’ll book one, and a fixed quote follows.
Which sealant will you use?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.