Perth and Kinross · Scotland
Commercial sealant contractors in PH6
We cover every part of the PH6 postcode district, which takes in Comrie and St Fillans. Every joint is properly prepared, with a 12-month guarantee.
Sealant contractors for PH6
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Areas within PH6
Our services across PH6
- Industrial and floor joint sealing
- Coloured and colour-matched sealant
- Fire-rated sealing and fire stopping
- Construction and new-build mastic
- Commercial washroom and wet-area sealing
- Facade and window perimeter sealing
- Expansion and movement joint sealing
- Commercial sealant contractors
- Mastic sealing for building owners and managing agents
- Every service
Let us know the job and your postcode and we’ll come back with a price: call the office on 01277 525 020 or use the quote form.
Neighbouring districts
More in Perth and Kinross
All places in Perth and Kinross
Areas we cover
Our commercial sealant contractors service in PH6
Getting a price for commercial sealant contractors in PH6 doesn’t need to be drawn out. Send photographs, drawings or a schedule of the joints through our quote form. If the joints need seeing in person, a site visit comes first. The enquiries we see most involve hardened, chalky sealant on south-facing or exposed elevations and wall and floor joints that have lost their seal, on floor and threshold joints, kitchen worktops and splashbacks and movement joints in walls and floors.
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked. If an area should be left alone while the sealant cures, we say how long and put signs out.
- First, details reach us through the quote form or a site visit.
- The cause is diagnosed and the scope priced as a fixed quote.
- Work is phased around your occupiers where areas need to stay in use.
- Old sealant is cut out completely, never sealed over.
- Each joint gets a suitable sealant, laid to depth and tooled.
- A final walk-round, then the 12-month guarantee applies.
What you will pay
A quote for sealant joints depends on how many there are, their condition and the access. Call for a quote.
Why choose Mastic Doctor
- Colours chosen to suit frames, cladding or finishes where possible
- Clear, fixed quotes
- Colour options checked against the specified product
- Work carried out by CSCS-carded applicators
Ask for a quote
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or phone 01277 525 020 or email us if you’d rather talk the job through.
Landmarks near Comrie
We work on buildings around Secession Church. A little further out are Castle Cluggy (4.1 miles east) and Crieff Community Hospital (5.4 miles east). Not far away are Loch Monzievaird.
Shops, offices and hotels in PH6
Across PH6, from Comrie and St Fillans to the smaller places between, commercial buildings run from high-street shops and offices to hotels, schools and business parks. We cover the whole area, so occupiers with several sites can use one contractor and one point of contact.
Work in PH6 comes under Scotland’s own building standards and technical handbooks. We seal to what has been specified, on every job.
Comrie: A hotel such as St Kessac's Hotel (less than half a mile north-west of Comrie) shows how much sealant a hospitality building has on show, from bathroom joints to the bar. A lasting commercial joint around Comrie begins with the old bead fully out and the faces clean and dry.
After the work
After handover, a little attention goes a long way:
- On pre-2000 buildings, share the asbestos information before work starts
- Keep a record of which joints were resealed and when
- Act on the first lifting edges rather than waiting
- Keep abrasive pads and scrapers off resealed joints
Put sealant on the planned maintenance checklist. A periodic look catches splits and lifting edges early. Should something look amiss, you can call 01277 525 020 or email a schedule or drawings and send a picture.
Sealant installed at the same time typically fails in sequence. The first failures are often a warning about the rest so the whole run is worth inspecting. We will tell you which sealant joints need doing first and which can wait.
General trades versus a specialist
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Honest limits
Before quoting, we check that sealant is the right answer. It won’t put right:
- Broken glass or blown double-glazed units
- Removing asbestos-containing materials (a licensed or specialist contractor’s job)
- Leaking roofs, gutters or flat-roof membranes (those need a roofer)
Cost factors for sealant joints
The price varies from site to site. It mainly depends on:
- Location, for remote and island sites
- Whether the work must be split into stages
- The product specified
- How much there is to seal
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
What to include in your enquiry
To price the job accurately, we need to understand the site. Send us:
- A wide shot and a close-up of the area
- Where the site is, with the postcode
- When you need the work done
- Whether an asbestos survey exists
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Why it fails
Every sealant joint is a maintenance item. Its life comes down to movement, UV and weather, how it’s cleaned, how much traffic passes it and what was used in the first place. In commercial buildings those factors tend to act together.
It’s worth sending us details if you spot any of the following:
- Hardened, chalky sealant on south-facing or exposed elevations
- Smeared sealant across finishes from a rushed job
- A top-up bead over failed sealant, now lifting
- Damp patches where an external joint has failed
Questions about PH6
Are you CHAS accredited?
Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.
Does commercial sealant work come with a guarantee?
It’s backed by our 12-month guarantee. Should anything we did fail within that period, let us know.
Is it fine to apply new sealant on top of old?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Will the building have to shut during the work?
It’s normal for us to work in occupied buildings. We agree the order of areas, protect what’s nearby and close off only the section we’re sealing.
Do your applicators hold CSCS cards?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.
Does the weather affect the work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Is PH6 in your area?
Yes. We cover PH6, and you can give us a call on 01277 525 020 or email drawings and photos to get started.