Highland · Scotland
Commercial sealant contractors in IV47
Our applicators cover all of the IV47 postcode district, including Carbost. Failed sealant is always cut out completely, with a 12-month guarantee.
Mastic and sealant across IV47
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Places in IV47
Sealant work we offer in IV47
- Coloured and colour-matched sealant
- Construction and new-build mastic
- Facade and window perimeter sealing
- Mastic sealing for building owners and managing agents
- Fire-rated sealing and fire stopping
- Expansion and movement joint sealing
- Commercial sealant contractors
- Commercial washroom and wet-area sealing
- Industrial and floor joint sealing
- See all services
Let us know the job and your postcode and we’ll come back with a price: speak to us on 01277 525 020 or email a schedule or drawings.
Postcodes nearby
Across Highland
All places in Highland
Every area we cover
Commercial sealant contractors across IV47: what to expect
How long a joint lasts is decided before any sealant leaves the gun. Old silicone gives new sealant nothing to grip, so every trace of it is removed, then both faces are cleaned back to sound, dry material with no dust or grease on them. Primer is used wherever the manufacturer calls for it on that surface and the joint depth is controlled with backing rod. Site teams most often ask us about untidy joints in a reception, shop floor or lobby and layers of sealant, all of them failing, on kitchen worktops and splashbacks, window and door perimeters and floor and threshold joints.
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly.
- First, details reach us through the quote form or a site visit.
- The cause is diagnosed and the scope priced as a fixed quote.
- Where parts of the building must stay open, the work is phased.
- Every failed bead is removed rather than covered.
- A suitable product for each joint goes in at the right depth and is tooled.
- We check the work with you, and the 12-month guarantee starts.
Pricing in IV47
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why clients in IV47 choose us
- Over 20 years of commercial sealing
- CSCS-carded applicators
- Workmanship guaranteed for 12 months
- Colours confirmed for the specified product
Request a quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Landmarks near Carbost
For a walk, there’s Beinn a' Bhràghad and Loch Fada.
Commercial premises across IV47
In IV47, much commercial sealant work follows refits in shops, offices and hotels in places such as Carbost. Where the joint is on show, a colour that suits the finish is part of the job.
Across IV47, outside sealant work is planned around the weather, so we keep some flexibility in the dates.
Carbost: For premises around Carbost where the joint is seen, colour options for the product are confirmed with the quote. Whatever the building in Carbost, commercial sealant work starts with cutting out the failed bead and cleaning the joint back to sound material.
Work for main contractors and building owners
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Why deal with it now?
Leaving a failed joint rarely saves money. Water past a frame perimeter or a washroom joint can reach plasterboard, insulation, floor coverings and the ceiling below, and the bill then involves other trades. Dealing with it while the damage stops at the bead is the cheaper route.
What your quote should include
- Which product they’ll use, and why it suits the joint
- How they handle RAMS and site documents
- Whether their applicators hold CSCS cards
- Will failed sealant be removed rather than covered?
When to bring in a specialist
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Keeping the joints sound
Problems stay small when the joints are checked regularly. Specifically:
- Check joints after other trades have worked nearby
- Keep washroom and kitchen extraction working
- Brief cleaning contractors to avoid scourers and blades on sealant
- Don’t let cleaning or traffic back on before the cure time is up
Good ventilation keeps wet-area sealant in better condition. Extraction that isn’t working keeps the joints wet, and mould follows damp. It’s worth having fans checked while the sealant is fresh.
Sealant rarely fails all at once across a building. A few splits this year normally mean more next year, so it makes sense to look at the wider elevation or block. We will tell you which sealant joints need doing first and which can wait.
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It won’t put right:
- Misted, cracked or failed glazing units (a glazier’s job)
- Leaking roofs, gutters or flat-roof membranes (those need a roofer)
- A dripping trap, valve or pipe behind a fitting
FAQs: IV47
Could the old sealant in an older building contain asbestos?
In buildings from before 2000 in particular, some old mastics and sealants may contain asbestos. Before cutting anything out, we ask for the asbestos register or survey, and anything suspect is left until it has been tested.
Does weather matter for sealant work?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
When can the area be used after sealing?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
Is IV47 in your area?
Yes. Sites across IV47 are covered, with one number for every area we cover.
Can you handle sealant work across several sites?
Yes. We regularly take on multi-site work and planned maintenance programmes, quoted per building or as a package.
Is it OK to apply fresh sealant over existing beads?
Removal of the failed sealant is always part of the job. Laying new silicone on old gives it nothing to grip, and the faces are brought back to sound, dry material before resealing.
Will the building have to shut during the work?
It’s normal for us to work in occupied buildings. Only the area being sealed is closed, and the sequence is agreed in advance, until its cure time has passed.