Construction and new-build mastic in Stornoway, Na h-Eileanan Siar
Mastic packages for new-build and refurbishment projects in Stornoway and across Na h-Eileanan Siar. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Caulk cracking where joints are moving more than expected
- A mastic package split between trades with no clear owner
- Snag items on joints that need redoing before handover
Construction mastic for Stornoway sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Mastic packages on Stornoway sites
With the shore within about 1 mile, Stornoway counts as a coastal location. Schemes this close to the sea see their facade joints tested by wind and rain from the day they’re sealed, so joint design, primers and product choice deserve extra care. Projects in Stornoway follow Scotland’s building regulations, with the local authority acting as verifier. The mastic package follows the approved specification.
New units and refits on sites such as Gleann Seileach Business Park, 0.8 miles north-west of Stornoway, need their panel and perimeter joints sealed to the specification. Extensions at sites like Western Isles Hospital (0.5 miles north of Stornoway) typically sit beside working departments, and the mastic follows strict access rules. Hotels like Royal Hotel, under half a mile to the south-west of Stornoway, rarely close for long, so refurbishment mastic is phased floor by floor.
Stornoway (Gaelic: Steòrnabhagh) is in Na h-Eileanan Siar. Anywhere in HS1, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. 87 places across Na h-Eileanan Siar fall within our area, including Stornoway.
If you need construction mastic in HS1 and HS2, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Barony Square, Bain Square and Grant Square. Access to Stornoway is via the A857 and A859, so getting applicators and materials to site is simple. We also cover Plasterfield (1 mile east), Laxdale (1 mile north), Sandwick (1 mile south-east), Steinis (1 mile east) and Newmarket (1 mile north). Stornoway is one of the busier places in Na h-Eileanan Siar, and we take on mastic packages for its commercial and public buildings. For island and remote sites, travel and materials need planning ahead, so include the location in your enquiry.
What’s near Stornoway
Recent enquiries here include premises near Neptune's Bar, among other places. Well-known places in the area include Western Isles Hospital (0.5 miles north) and Lewis Loom Centre (less than half a mile south-west). The countryside around Stornoway includes Loch Àirigh na Lic.
How we handle construction mastic in Stornoway
Most of the packages we price run well beyond frames: frame perimeters inside and out, caulking to trims and boards where the specification calls for it, sanitary silicone, kitchens, and the final snag list. Splitting those between trades often leaves gaps in responsibility. The enquiries we see most involve window and door perimeters that won’t pass inspection and bath and shower joints scraped during the final clean, on cladding and panel joints, internal decorators’ caulk and brick and block movement joints. One point of contact handles commercial sealant work in Stornoway from the first photographs to the final walk-round, for single jobs and planned programmes alike.
External sealing around Stornoway depends on dry faces and the right temperature. We build some give into the plan and agree it with the site manager.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Where
- Stornoway (HS1, HS2)
- Wider area
- Na h-Eileanan Siar
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Work for main contractors and building owners
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
FAQs: Stornoway
Do you cover business parks and estates near Stornoway, such as Gleann Seileach Business Park?
Yes. Estates, retail parks and business parks around Stornoway, Gleann Seileach Business Park among them, are all within reach. To start, just call 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Do you take on work at healthcare sites like Western Isles Hospital?
Yes, hospitals are one of the sectors we cover. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
How do I request a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photographs and a postcode.
Can you seal external joints in wet or cold weather?
Outside, the joint has to be dry and the temperature within the product’s limits. Frosty or damp mornings can hold up external sealing.
What happens if old sealant might contain asbestos?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
Can staff carry on working while you’re here?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
Different surfaces, different methods
Bathrooms, en suites and washrooms
In bathrooms and washrooms, an anti-mould sanitary silicone goes around every fitting. Each joint is prepared, sealed and finished with a neat tooled line, and any bath is loaded with water first where that’s the agreed method.
Fire-rated sealant where specified
Where the specification calls for fire-rated or intumescent sealant around service penetrations or linear gaps, we install it to the manufacturer’s tested detail. The design and sign-off of fire stopping sit with the designer, principal designer or fire engineer; we work to the specification and the manufacturer’s installation guidance.
Doing it in-house
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Looking after the joints
For the best life from the joints:
- Use the product the specification names
- Brief the final clean team to avoid blades near sealant
- Protect sealed areas from following trades
- Don’t force external sealing on a damp or frosty day
Tell the builders’ clean team which areas have new sealant. Blades and abrasive pads are the commonest cause of damage at the final clean.
Snag items left to the last week put handover at risk. Clearing snags area by area spreads the work out, and avoids a rush.
On site: what to expect
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work typically takes a day or two on a small fit-out and several weeks on a large multi-storey package, and we clear our waste as we work. Tell us who will meet us and how to get in at your building near Stornoway. We will confirm the plan with the fixed quote.
- We walk the site or review drawings to understand the package.
- You receive a fixed quote covering scope, products and sequence.
- Site paperwork is confirmed and our CSCS-carded applicators are inducted.
- Sealing follows the programme as areas are released.
- Any frame gaps or issues outside our scope are flagged to the site team.
- Final snagging is completed and the 12-month guarantee applies.
Getting the site ready
- Tell us what induction or permit system the site runs
- Let building users know which areas are affected
- Send any specification or drawings in advance
Quotes
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, give us a call on 01277 525 020 or send photos by email.
Read more
Towns and villages near Stornoway
Other services in Stornoway
What sets the cost
Sealant work doesn’t have a standard rate, because every site is different. What we look at:
- Location, for remote and island sites
- Removal of failed or old sealant
- The size and state of each joint
- Whether the work must be split into stages
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Sending details for a quote
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- Photos of the joints, close up and from further back
- Specification clauses that apply
- The postcode of the building
- Drawings or a marked-up plan, if available
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.