Buckinghamshire · England
Commercial sealant contractors in HP7
Sealant work for contractors, FMs and building owners across HP7, from Coleshill, Winchmore Hill and Beamond End, with a fixed quote before we start.
Need sealant work in HP7?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Places in HP7
- Coleshill
- Winchmore Hill
- Beamond End
- Mop End
- Penn Street
- Woodrow
- Amersham
- Little Chalfont
- Amersham on the Hill
What we do in HP7
- Construction and new-build mastic
- Facade and window perimeter sealing
- Commercial washroom and wet-area sealing
- Expansion and movement joint sealing
- Fire-rated sealing and fire stopping
- Coloured and colour-matched sealant
- Industrial and floor joint sealing
- Commercial sealant contractors
- Mastic sealing for building owners and managing agents
- See all services
Tell us what needs doing and your postcode and we’ll come back with a price: call 01277 525 020 or email us.
Districts next door
Elsewhere in Buckinghamshire
Towns and villages in Buckinghamshire
Every area we cover
Our commercial sealant contractors service in HP7
Commercial occupiers rarely want a floor out of action for sealant work. Work is scheduled around the site hours and access windows you give us; phasing keeps some washrooms, kitchens or entrances available while others are done. It’s the same approach in offices, retail units, hotels, schools and healthcare buildings. Site teams most often ask us about damp patches where an external joint has failed and messy, uneven beads from earlier work that let the building down, on washrooms and tea points, floor and threshold joints and movement joints in walls and floors.
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed before we move to the next.
- We start with the evidence: photos, drawings or a look on site.
- You get a fixed quote covering removal, preparation and the new sealant.
- Sequence, access and working times are settled before the first joint is touched.
- Each joint is stripped, cleaned back to sound faces and primed where the maker specifies.
- Depth is set with backing, then the sealant is applied, tooled and the area tidied.
- We hand back each area with its cure time and our 12-month guarantee.
How we quote
The price depends on the quantity of joints, what has to come out first and the access. Call for a fixed quote once you have the details.
Why clients in HP7 choose us
- Colours chosen to suit frames, cladding or finishes where possible
- A Constructionline member, so easy to vet
- Fully insured
- A range of standard colours, depending on the product
Quotes
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Near you in Coleshill
Around Coleshill, our work takes us to commercial buildings near Coleshill Church of England Infant School, The Red Lion pub and Amersham Hall. You will also find Amersham School (2.1 miles north-east) and Church of All Saints (less than half a mile south-west). Coleshill’s nearest station is Amersham station, about 2 miles north-east of the centre. Other landmarks nearby include Great Missenden (4 miles north-west) and Amersham Hospital (1.1 miles north). For a walk, there’s Long Grove Wood.
Shops, offices and hotels in HP7
Across HP7, from Amersham, Little Chalfont and Amersham on the Hill to the smaller places between, commercial buildings run from high-street shops and offices to hotels, schools and business parks. We cover the whole area, so occupiers with several sites can use one contractor and one point of contact.
Around the motorway corridors of the South East, business parks and industrial estates are common, and we cover HP7 along with the rest of the region.
Coleshill: A business with units at St. Georges Industrial Estate and Corinium Industrial Estate needn’t use two contractors for its sealant. Shops and cafés around stations like Amersham station, 2 miles north-east of Coleshill, trade from early, so work is timed around them.
Surface by surface
Fire-rated seals where specified
Where the specification calls for fire-rated or intumescent sealant around service penetrations or linear gaps, we install it to the product’s tested detail. The design and sign-off of fire stopping belong to the designer and building control; we install what’s specified.
Facade and cladding joints
Panel joints on cladding and rendered facades open and close with the temperature. The product has to suit the movement, and the depth has to be controlled with backing. Access, such as scaffold already up, is agreed before the price is fixed.
What sets the cost
Your fixed quote is built from the real scope. It takes account of:
- Specialist products, such as fire-rated or hygienic sealants
- Whether the work must be split into stages
- How much existing material needs removing
- Backing rod, priming and other preparation
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Before you send an enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- The site address and postcode
- A wide shot and a close-up of the area
- Asbestos survey details if the building is older
- Anything awkward about access or site hours
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, ring 01277 525 020 or send photos by email.
What sealant work can’t fix
Part of a good diagnosis is knowing where sealant stops. You will hear from us if the cause turns out to be one of these:
- Structural cracks or movement the joints weren’t designed for
- Broken glass or blown double-glazed units
- Water from a services leak rather than a joint
For managing agents and facilities managers
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. HP7 can form part of a wider programme across Buckinghamshire.
Site staff or a sealant specialist?
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Questions we are asked in HP7
Do you work in HP7?
Yes. Sites across HP7 are covered.
Do your applicators hold CSCS cards?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.
Can you supply RAMS and insurance details?
Send your site requirements with the enquiry, and we will confirm the RAMS, insurance and CSCS details with the quote. From you, we’ll need the asbestos information for older buildings and any site rules.
Could the old sealant in an older building contain asbestos?
It can, on some older buildings. That’s why we ask for the asbestos information first, and stop if a material is suspect until it’s tested. HSE guidance on asbestos is a useful reference.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
How long does a typical visit take?
It depends on the scope, though a typical visit typically takes part of a day on a small job and longer where several buildings or phases are involved. For bigger or phased jobs, we’ll set out a timescale with the quote.
Will you just go over the old sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.