Mastic sealing for building owners and managing agents in Sevenscore, Kent
Looking for mastic sealing in Sevenscore? It’s simple: send details, get a quote, we seal, guaranteed.
- No planned programme for sealant
- Draught complaints from residents or tenants
- Mastic failing across several blocks on an estate
Mastic sealing near Sevenscore
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Mastic sealing in Sevenscore, done properly
Across Sevenscore and the rest of Kent, we work the same way: send details, get a fixed quote, we seal, and the work is guaranteed. A list of buildings, a few photographs and approximate joint numbers are enough for a quick quote, and site visits can be arranged. If you’re dealing with old repairs sealed over failed mastic and mastic failing across several blocks on an estate, we can help, whatever the surface. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Sevenscore, preparation and product choice get the time they need.
For buildings around smaller places like Sevenscore, we group work so one trip covers it. Send photographs of the frames and joints and we will give a fixed quote.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Place
- Sevenscore (CT12)
- Region
- Kent
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
From enquiry to sign-off
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed before we move to the next. Jobs in and around smaller places like Sevenscore are normally planned as a single visit, so photographs and measurements up front really help. Then the right materials arrive with us.
- We inspect the joints, building by building, and record what has failed and why.
- We send a fixed quote that sets out the joints, the products and the programme.
- The programme is fixed with you, including dates you can pass on to residents or tenants.
- We remove the old mastic completely and clean the joint faces back.
- Backing rod and primer go in where the joint and the product need them, then new sealant is applied and tooled.
- Finished joints are looked over and the 12-month guarantee confirmed.
Before we start on site
- Flag any permit to work we will need
- Let building users know which areas are affected
- Make sure the joints can be reached
Quotes
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, give us a call on 01277 525 020 or email the details over.
Related advice
After the work
Once the work is signed off, a little attention goes a long way:
- Protect low-level joints in entrances
- Share your contractor requirements early
- Track which buildings were done and when
- Check sealant joints during planned building inspections
Add mastic joints to your cyclical inspections. Check for splits, open joints, brittle mastic and lifting edges and record where they are.
Joints on a building age together, so it pays to look at the whole elevation. Doing them together saves going back again and again.
Blocks and managed buildings in Sevenscore
Sevenscore is within about 2 miles of the coast. For owners and agents with buildings near the sea, exposed elevations are where frame mastic fails first. Sevenscore lies roughly 63 miles out from central London. Commuter-belt towns tend to have plenty of managed blocks near stations and town centres; their frame mastic often ages block-wide.
If you own or manage units on a site such as Maple Leaf Business Park, 1.7 miles to the north-west of Sevenscore, failed mastic on frames, door surrounds and external joints can be dealt with unit by unit. Older community buildings, St Mary among them, often have frames of mixed ages whose mastic varies.
Sevenscore is about 3 miles west of Ramsgate, in Kent. Anywhere in CT12, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Sevenscore is one of 931 places in Kent on our list for mastic joints. For work in that direction, see our London page.
Postcode districts covered here: CT12 for mastic joints. Close to Sevenscore, our area also takes in Cliffs End (1 mile east), Way (1 mile north-west), Ebbsfleet (1 mile south), Richborough Port (2 miles south) and Manston (2 miles north-east). Further afield, our area takes in Canterbury (12 miles west), Margate (4 miles north-east), Dover (13 miles south), Ramsgate (3 miles east), Broadstairs (4 miles north-east) and Whitstable (14 miles west).
What’s near Sevenscore
Around Sevenscore, our work takes us to commercial buildings near The Sportsman pub and Sandwich and Pegwell Bay. Sevenscore’s nearest station is Thanet Parkway station, roughly 0.7 miles east. A little further out are Westwood Cross (3 miles north-east) and Ramsgate General Hospital (2.8 miles east). Green spaces nearby include Sandwich and Pegwell Bay.
When something else is needed
Some faults sit outside our scope, and we say so rather than covering them up:
- Roof leaks, gutters or failed flashings that aren’t sealant joints
- Asbestos-containing sealant, which we don’t remove
- Masonry that has broken away beside the joint
If in doubt, call the office on 01277 525 020 or send details through our quote form and we’ll say what we think before you book.
Surfaces we seal
- Communal entrances and stairwells
- Communal kitchens and washrooms
- Balcony and threshold joints
- Window and door perimeters on blocks
- Shopfronts below residential blocks
- External wall and movement joints
Questions about Sevenscore
Will you take on a block within reach of Thanet Parkway station?
Yes. Managing agents, landlords, property factors and housing associations are who this service is for. Photos of each elevation help us quote accurately.
Is Maple Leaf Business Park, near Sevenscore, within your area?
Yes. We cover Sevenscore and the area around it, including industrial estates, business parks and retail parks such as Maple Leaf Business Park. To start, just give us a call on 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Can people stay in the building while you reseal?
We plan around people living or working in the building. We agree the programme so you can notify occupiers and communal access is kept open.
When can the area be used after sealing?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it.
Is mastic sealing guaranteed?
A 12-month guarantee covers our work. It applies to our workmanship rather than damage or problems with the frames.
Which sealant will you use?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How the quote is worked out
We price every job individually. The things that drive the figure:
- Quantities, in metres or numbers
- The site’s rules and procedures
- Specialist products, such as fire-rated or hygienic sealants
- Working within restricted access windows
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Details that help us quote
There’s no need for a formal survey. These details are enough to start:
- Photos of the joints, close up and from further back
- The asbestos register, for older buildings
- Approximate linear metres or a joint schedule
- How the joints are reached, and at what height
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Signs you need mastic sealing in Sevenscore
Poor preparation explains many failed joints. Without clean, sound faces and a primer where the product needs one, the bead peels off one side.
Things that typically lead to an enquiry:
- The same joint failures repeated across a portfolio
- Open joints in brickwork or panels
- A mix of products and colours from past repairs
- Water getting in round frames after rain
Blocks of flats and mixed-use buildings often cluster around stations such as Thanet Parkway station (0.7 miles east of Sevenscore) and their window and balcony mastic tends to age at the same rate across a building.
What to look for in a quote
- How joint depth will be controlled
- Whether primer will be used where the manufacturer specifies it
- Is the sealant right for the movement and the substrate?
- What level of public liability insurance do they hold?
Owners, agents and contractors
Hospitality, education, healthcare, office and retail clients book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Sevenscore can sit alongside others in a wider programme across Kent.