Mastic sealing for building owners and managing agents in Reculver, Kent
Mastic sealing for building owners, managing agents and housing associations across Reculver, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Patchy repairs in mismatched sealant
- Worn sealant at communal door frames
- Draughts at frames across a block
Mastic sealing near Reculver
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle mastic sealing in Reculver
Our clients include managing agents, property factors in Scotland, housing associations and landlords with block or commercial portfolios. A planned, building-by-building programme often works better than reacting to each complaint and we quote and schedule each building in turn. We work on shopfronts below residential blocks, window and door perimeters on blocks and balcony and threshold joints, and the failures we are asked to look at most are patchy repairs in mismatched sealant and communal area joints that look neglected. A single leaking joint is often how a building in Reculver first comes to us: we look at the rest while we’re there and tell you what we find.
For buildings around smaller places like Reculver, we group work so one trip covers it. Photos of each elevation help us quote accurately.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Place
- Reculver (CT6)
- Region
- Kent
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Questions we’re asked in Reculver
Is Reculver too far out for you?
No. Places such as Reculver are covered as much as the big towns. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Our building in Reculver is near the coast: does that change the sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Do you do block-wide mastic programmes?
We can. We survey and price each building, then work through them in order starting wherever is most urgent.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
Who decides which product is used?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Can you quote from photographs?
That depends on the size and complexity of the job. Simple work can often be priced from photos, and bigger or more complex jobs typically get a visit.
What sets the cost
Quotes vary with the job. It mainly depends on:
- Working within restricted access windows
- The size and state of each joint
- Any access equipment needed
- How much existing material needs removing
Pricing mastic joints depends on quantities, condition and access, plus any specification you’re working to. Ask us for a fixed quote.
What we need to price the job
Whether it’s one area or a whole building, the same details help:
- Anything awkward about access or site hours
- Your programme or deadline
- The type of building and who uses it
- Rough lengths or quantities, or drawings if you have them
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, phone 01277 525 020 or email us.
When something else is needed
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be any of the following:
- Old mastic suspected of containing asbestos, which must be tested and dealt with by a specialist first
- Failed window or door frames, which need a window contractor
- Substrate edges that need repairing first
If you’re not sure, just phone 01277 525 020 or email us and we’ll give you a straight answer.
Joints and surfaces we work on
- Shopfronts below residential blocks
- Balcony and threshold joints
- Window and door perimeters on blocks
- Communal kitchens and washrooms
- External wall and movement joints
- Communal entrances and stairwells
Planned mastic for Reculver portfolios
Reculver lies within about 1 mile of the sea. On buildings near the shore, the side facing the weather usually needs its mastic renewed first. Rainfall across the South East, Reculver included, is lower than in many parts of the UK. External mastic still waits for dry faces and the right temperature, and the sunniest, most exposed sides of a building typically need attention first.
For agents with blocks near Herne Bay station, which lies west of Reculver, a block-wide mastic programme deals with frames, balconies and entrances in one go. For a school such as Reculver Church of England Primary School, perimeter mastic on windows and doors is a holiday job. Property owners at sites such as Hedgend Industrial Estate (2.8 miles south-east of Reculver) can have mastic renewed between lettings.
Reculver is about 3 miles east of Herne Bay, in Kent. Reculver sits inside our coverage and the rest of Kent, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Kent, 931 places are covered, including Reculver. Sites around London have their own page, roughly 56 miles from Reculver.
Anyone looking for mastic sealing in CT6 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Reculver Lane and Cherry Blossom Drive or nearby, we can quote for mastic joints. We also cover Bishopstone (1 mile west), Hillborough (1 mile south-west), Hawthorn (2 miles south-west), Beltinge (2 miles west) and Highstead (2 miles south-west). A short drive away, we cover Canterbury (8 miles south-west), Margate (8 miles east), Ramsgate (10 miles east), Broadstairs (10 miles east), Whitstable (7 miles west) and Deal (14 miles south-east).
Around Reculver
Locally, jobs take us to sites close to Bishopstone Cliffs and The King Ethelbert Inn, among other places. The closest station to Reculver is Herne Bay station, about 3.5 miles west of the centre.
What the job involves on each surface
Communal areas
Communal entrances, stairwells and corridors have joints at door frames, screens, skirting and floor edges. Tidy, sound joints keep them looking cared for.
Planned maintenance
How long mastic lasts depends on exposure, movement and the product used. Regular inspection is the best way to plan resealing.
General trades versus a specialist
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Why act early in Reculver
Failed perimeter mastic lets cold air in around frames and the windows normally get the blame. In many cases, new perimeter sealant deals with it where the frames themselves are sound. Around Reculver, it’s better to renew all the failing joints at once, rather than one at a time. Send photos of each area and we’ll quote for the lot.
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Why choose Mastic Doctor in Reculver
- Old sealant cut out, never sealed over
- Specification-led, product-correct work
- Standard and matched colours in many product ranges
- Colours chosen to suit frames, cladding or finishes where possible
Read how commercial sealant jobs are priced and how we’re accredited.
Places near Reculver
Other services in Reculver
On site: what to expect
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. Jobs in and around smaller places like Reculver are normally planned as a single visit, so photographs and measurements up front really help. That way the right products come on the day.
- We inspect the joints, building by building, and record what has failed and why.
- You get a fixed quote, priced per building where that helps your budgeting.
- The programme is fixed with you, including dates you can pass on to residents or tenants.
- Old sealant is stripped and each face prepared back to firm material.
- Deep joints get backing rod, faces are primed if the manufacturer specifies it, then the joint is sealed and tooled.
- Finished joints are looked over and the 12-month guarantee confirmed.
Getting the site ready
- Point out parking and an unloading spot
- Tell us what induction or permit system the site runs
- Confirm the product named in the specification
Quotes
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.